Feasibility Study of an Extrusion-based Direct Metal Additive Manufacturing Technique

Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyping Journal, 1, 26, 10.1108/13552549510078113 Anzalone, 2013, A Low-Cost Open-Source Metal 3-D Printer, IEEE Access, 1, 803, 10.1109/ACCESS.2013.2293018 Armillotta, 2013, SLM tooling for die casting with conformal cooling channels, Int J Adv Manuf Technol, 71, 573, 10.1007/s00170-013-5523-7 Armillotta, 2013, A tool for computer-aided orientation selection in additive manufacturing processes, In: Proc. of of the 6th Int. Conf. on Advanced Research in Virtual and Rapid Prototyping, 469 Armillotta, 2006, Assessment of surface quality on textured FDM prototypes, Rapid Prototyping Journal, 12, 35, 10.1108/13552540610637255 Bai, 2015, An exploration of binder jetting of copper, Rapid Prototyping Journal, 21, 177, 10.1108/RPJ-12-2014-0180 Bellini, 2005, New developments in fused deposition modeling of ceramics, Rapid Prototyping Journal, 11, 214, 10.1108/13552540510612901 Bouri M and Clavel R. The linear delta: Developments and applications. In: Proc. of the Joint 41st International Symposium on Robotics and 6th German Conference on Robotics (ISR/ROBOTIK), 2010, pp. 1198-1205. Gong X, Anderson T and Chou K. Review on Powder-Based Electron Beam Additive Manufacturing Technology. In: Proc. of ASME/ISCIE 2012 Int. Symp. Flex. Autom., 2012, p. 507. Gosselin, 1994, Agile eye: A high-performance three-degree-of-freedom camera-orienting device, In: Proc. of the IEEE International Conference on Robotics and Automation, 781 Himmer, 1999, Lamination of metal sheets, Comput Ind, 39, 27, 10.1016/S0166-3615(98)00122-5 Jafari, 2000, A novel system for fused deposition of advanced multiple ceramics, Rapid Prototyping Journal, 6, 161, 10.1108/13552540010337047 Jamshidinia, 2012, Temperature Distribution and Fluid Flow Modeling of Electron Beam Melting® (EBM), ASME IMECE Fluids Heat Transf. Parts A, B, C D, 7, 3089, 10.1115/IMECE2012-89440 Kalita, 2003, Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling, Mater Sci Eng C, 23, 611, 10.1016/S0928-4931(03)00052-3 Karunakaran, 2012, Rapid manufacturing of metallic objects, Rapid Prototyping Journal, 18, 264, 10.1108/13552541211231644 Lewis, 2006, Direct ink writing of three-dimensional ceramic structures, Journal of the American Ceramic Society, 89, 3599, 10.1111/j.1551-2916.2006.01382.x Li, 2010, Study of Metal Powder Extrusion and Accumulating Rapid Prototyping, Key Eng Mater, 443, 81, 10.4028/www.scientific.net/KEM.443.81 Li, 2006, Porous Ti6Al4V scaffold directly fabricating by rapid prototyping: preparation and in vitro experiment, Biomaterials, 27, 1223, 10.1016/j.biomaterials.2005.08.033 Lipson, 2005, aventi C, 3-D Printing the History of Mechanisms. J Mech Des, 127, 1029 Masood, 2004, Development of new metal/polymer materials for rapid tooling using Fused deposition modelling, Mater Des, 25, 587, 10.1016/j.matdes.2004.02.009 Mekid, 2008 Milewski, 1998, Directed light fabrication of a solid metal hemisphere using 5-axis powder deposition, J Mater Process Technol, 75, 165, 10.1016/S0924-0136(97)00321-X Murr, 2009, Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications, J Mech Behav Biomed Mater, 2, 20, 10.1016/j.jmbbm.2008.05.004 Neumann, 2013, Advanced automated milling, drilling and fastening utilizing parallel kinematic machines. SAE Technical Papers;, 7 Roberson, 2015, Expanding the applicability of FDM-type technologies through materials development, Rapid Prototyping Journal, 21, 137, 10.1108/RPJ-12-2014-0165 Roppenecker, 2012, How to Design and Create a Cardan Shaft for a Single Port Robot by Selective Laser Sintering. ASME Des, Mater. Manuf. Parts A, B C, 3, 49 Song, 2014, Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing, J Manuf Sci Eng, 137, 021005, 10.1115/1.4028897 Thrimurthulu, 2004, Optimum part deposition orientation in fused deposition modeling, Int J Mach Tools Manuf, 44, 585, 10.1016/j.ijmachtools.2003.12.004 Turner, 2014, A review of melt extrusion additive manufacturing processes: I, Process design and modeling. Rapid Prototyping Journal, 20, 192, 10.1108/RPJ-01-2013-0012 Williams, 2011, Additive manufacturing of metallic cellular materials via three-dimensional printing, International Journal of Advanced Manufacturing Technology, 53, 231, 10.1007/s00170-010-2812-2 Zhang, 2004, Adaptive Slicing for a Multi-Axis Laser Aided Manufacturing Process, J Mech Des, 126, 254, 10.1115/1.1649966