Fault diagnosis of FDM process based on support vector machine (SVM)

Emerald - Tập 26 Số 2 - Trang 330-348 - 2019
Huaqing Hu1, Ketai He2, Tianlin Zhong2, Yili Hong3
1Guanghua School of Management, Peking University, Beijing, China
2School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China
3Department of Statistics, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA

Tóm tắt

Purpose This paper aims to propose a method to diagnose fused deposition modeling (FDM) printing faults caused by the variation of temperature field and establish a fault knowledge base, which helps to study the generation mechanism of FDM printing faults. Design/methodology/approach Based on the Spearman rank correlation analysis, four relative temperature parameters are selected as the input data to train the SVM-based multi-classes classification model, which further serves as a method to diagnose the FDM printing faults. Findings It is found that FDM parts may be in several printing states with the variation of temperature field on the surface of FDM parts. The theoretical dividing lines between different FDM printing states are put forward by traversing all the four-dimensional input parameter combinations. The relationship between the relative mean temperature and the theoretical dividing lines is found to be close and is analyzed qualitatively. Originality/value The multi-classes classification model, embedded in FDM printers as an adviser, can be used to prevent waste products and release much work of labors for monitoring.

Từ khóa


Tài liệu tham khảo

2015, Improving kNN multi-label classification in prototype selection scenarios using class proposals, Pattern Recognition, 48, 1608, 10.1016/j.patcog.2014.11.015

2018, Thermal and surface characterization of ABS replicas made by FDM for rapid tooling applications, Rapid Prototyping Journal, 24, 28, 10.1108/RPJ-07-2016-0110

1963, Thermodynamics and departures from fourier's law of heat conduction, Archive for Rational Mechanics and Analysis, 13, 245, 10.1007/BF01262695

2004, A decision based one-against-one method for multi-class support vector machine, Pattern Analysis and Applications, 7, 164

2000, An experimental comparison of three methods for constructing ensembles of decision trees: bagging, boosting, and randomization, Machine Learning, 40, 139, 10.1023/A:1007607513941

2019, The trends and challenges of fiber reinforced additive manufacturing, The International Journal of Advanced Manufacturing Technology, 102, 1801

2018, Approach to online defect monitoring in fused deposition modeling based on the variation of the temperature field, Complexity, 2018, 1

2019, Profile monitoring based quality control method for fused deposition modeling process, Journal of Intelligent Manufacturing, 30, 947, 10.1007/s10845-018-1424-9

2014, FBG based in situ characterization of residual strains in FDM process, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, 333

2018, Development of Data-Driven in-Situ monitoring and diagnosis system of fused deposition modeling (FDM) process based on support vector machine algorithm, International Journal of Precision Engineering and Manufacturing-Green Technology, 5, 479, 10.1007/s40684-018-0051-4

2016, In-situ monitoring of strain and temperature distributions during fused deposition modeling process, Materials & Design, 97, 400, 10.1016/j.matdes.2016.02.099

2018, Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review, The International Journal of Advanced Manufacturing Technology, 95, 527

2018, Post-processing of FDM parts to improve surface and thermal properties, Rapid Prototyping Journal, 24, 1091, 10.1108/RPJ-12-2016-0207

2007, Combining weighted SVMs and Spectrum-Based kNN for multi-classification, International Symposium on Neural Networks: Advances in Neural Networks, 448

2015, Sensor-Based online process fault detection in additive manufacturing, ASME 2015 International Manufacturing Science and Engineering Conference

2015, Online Real-Time quality monitoring in additive manufacturing processes using heterogeneous sensors, Journal of Manufacturing Science & Engineering, 137, 1007-1

2014, Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE), The International Journal of Advanced Manufacturing Technology, 73, 509

2016, Embedding sensors in FDM plastic parts during additive manufacturing, Conference Proceedings of the Society for Experimental Mechanics Series, 205

2010, RUSBoost: a hybrid approach to alleviating class imbalance, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans, 40, 185, 10.1109/TSMCA.2009.2029559

2008, Effect of processing conditions on the bonding quality of FDM polymer filaments, Rapid Prototyping Journal, 14, 72, 10.1108/13552540810862028

2003, Assessment of temperature on the die surface in laboratory hot metal forming, Applied Thermal Engineering, 23, 113, 10.1016/S1359-4311(02)00170-9

2017, A dynamic model for nozzle clog monitoring in fused deposition modelling, Rapid Prototyping Journal, 23, 391, 10.1108/RPJ-04-2016-0054

2017, Tool condition monitoring system based on support vector machine and differential evolution optimization, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231, 805, 10.1177/0954405415619871

2016, In situ monitoring of FDM machine condition via acoustic emission, International Journal of Advanced Manufacturing Technology, 84, 1483

2017, Real-time FDM machine condition monitoring and diagnosis based on acoustic emission and hidden semi-Markov model, The International Journal of Advanced Manufacturing Technology, 90, 2027

2017, Fully resolved numerical simulations of fused deposition modeling. Part II-Solidification, residual stresses, and modeling of the nozzle, Rapid Prototyping, 24, 1

2018, Multiclass SVM active learning algorithm based on decision directed acyclic graph and one versus one, Cluster Computing, 1

2014, A PHM approach to additive manufacturing equipment health monitoring, fault diagnosis, and quality control, Conference of the Prognostics & Health Management Society, 1

Thông tin
Thông tin xuất bản

Emerald

Tập 26 Số 2

330-348

Thông tin tác giả