Fatigue reliability assessment and life-cycle cost analysis of roadway bridges equipped with weigh-in-motion systems

Structure and Infrastructure Engineering - Tập 19 Số 10 - Trang 1317-1333 - 2023
Stefano Sacconi1, Ilaria Venanzi1, Laura Ierimonti1, Michela Torti1, Simon Laflamme2, Filippo Ubertini1
1Department of Civil and Environmental Engineering, University of Perugia, Perugia, Italy
2Department of Civil, Construction, and Environmental Engineering, Iowa State University, Ames, Iowa, USA

Tóm tắt

Từ khóa


Tài liệu tham khảo

Bayane I., 2019, 13th International Conference on Applications of Statistics and Probability in Civil Engineering

Bertoncelli A., 2019, The “special influence line as a useful tool for the determination of the stress history in the procedure for the fatigue verifications of bridge

10.3390/s20030659

10.1061/(ASCE)ST.1943-541X.0000460

10.1080/15732479.2020.1734632

Diamantidis, D., Sykora, M. & Sousa, H. (2019). Quantifying the Value of Structural Health Information (SHI) for Decision Support - Guide for practising engineers (COST Action TU1402).

10.1016/0142-1123(82)90018-4

Eurocode 0, 2005, Basis of structural design, Eurocode 0: EN 1990

Eurocode 3, 2005, Design of steel structures-Part 1-9: Fatigue, Eurocode 3: EN 1993-1-9

10.1680/jfoen.15.00015

10.1016/j.ijfatigue.2016.09.019

10.1080/15732479.2016.1267772

10.1061/(ASCE)1084-0702(2008)13:3(258)

10.1080/15732479.2011.568508

10.1016/j.compstruc.2012.09.002

10.1016/j.trpro.2016.05.215

10.1016/j.jweia.2017.09.020

10.1016/j.jweia.2018.03.009

10.1080/15732479.2019.1604772

Joint Committee on Structural Safety, 2011, Probabilistic model code part 3: Resistance models

10.1061/(ASCE)ST.1943-541X.0000280

KISTLER. (2021). https://www.kistler.com/it/applications/sensor-technology/pesatura-dinamica-wim.

10.1080/15732479.2020.1778741

10.1016/j.ijfatigue.2010.01.002

10.1007/s13296-018-0109-8

10.2749/101686609788220231

10.1080/15732479.2017.1359308

10.1061/(ASCE)EM.1943-7889.0001711

10.1061/AJRUA6.0001085

10.1115/1.4009458

10.17226/13717

10.1002/stc.2352

Norske Veritas, D. (2011). Fatigue design of offshore steel structures. No. DNV-RP-C203.

Nowak A. S., 2000, Reliability of structures

Okasha N. M., 2012, Structure and Infrastructure Engineering, 8, 999

10.1007/s13296-018-0104-0

10.1016/S0167-4730(99)00037-5

10.1186/s43065-021-00040-3

10.1002/stc.416

10.1080/15732479.2016.1164728

10.3846/13923730.2014.897991

10.1080/15732479.2019.1649287

Sousa, H., Wenzel, H. & Thöns, S. (2019). Quantifying the Value of Structural Health Information (SHI) for decision support - Guide for operators (COST Action TU1402).

Straub D., 2017, ICOSSAR - 12th International Conference on Structural Safety & Reliability

10.1080/15732479.2018.1562478

The MathWorks Inc, 2018, MATLAB R2018b: Release note user’s guide

10.1111/mice.12332

10.12783/shm2019/32094

10.1177/1475921708090556

10.1177/1475921721996624

10.47964/1120.9086.18691

U.S. Department of Transportation Federal Highway Administration. (2010). WIM Data Analyst’s Manual, FHWA-IF-10-018.

10.1155/2019/5152031

Venanzi I., 2020, An International Journal, 30, 379

10.1080/15732479.2018.1442482

10.1061/(ASCE)BE.1943-5592.0001381

10.1080/15732479.2020.1833946

10.1177/1369433216646011

Zhang L., 2007, Annual Conference of the Transportation Association of Canada

10.1002/stc.1631