Fatigue properties of vibration-welded nylon 6 and nylon 66 reinforced with glass fibres

Wise, 1997, Welding plastics, Des Eng, 27 Stokes, 1988, Vibration welding of thermoplastics. Part I: phenomenology of the welding process, Polym Eng Sci, 28, 718, 10.1002/pen.760281104 Stokes, 1995, Toward a weld-strength data base for vibration welding of thermoplastics, ANTEC, 1280 Bates PJ, Couzens D, Kendall J. Vibration welding of highly reinforced thermoplastic composites. In: Proceedings of the american society for composites-15th technical conference, September 25–27; 2000. p. 221–8. Kagan VA, Lui, S-C, Smith GR, Patry J. The optimized performance of linear vibration-welded nylon 6 and nylon 66 butt joints. In: Proceedings of the SPE 54th annual technical conference and exhibits ANTEC; 1996. p. 1266–74. MacDonald J. Vibration welding of engineering plastics. Master’s thesis, Royal Military College of Canada, Kingston, Ontario; 2001. Casado, 2006, Fatigue failure of short glass fibre reinforced PA 6.6 structural pieces for railway track fasteners, Eng Failure Anal, 13, 182, 10.1016/j.engfailanal.2005.01.016 Stokes, 1992, Fatigue strength of vibration-welded thermoplastic butt joints, Polym Eng Sci, 32, 593, 10.1002/pen.760320905 Tsang, 2005, Fatigue strength of vibration-welded unreinforced nylon butt joints, Polym Eng Sci, 45, 935, 10.1002/pen.20351 Tsang KY, Bates PJ, DuQuesnay DL. Fatigue behaviour of un-reinforced and glass reinforced nylon compounds. In: Proceedings of the international conference on composites engineering, ICCE-11, South Carolina, USA, August 8–14; 2004. Wyzgoski, 2005, Fatigue of fiber-reinforced injection molded plastics I: stress-lifetime data, Polym Compos, 25, 489, 10.1002/pc.20042 Jia, 1998, Effects of time and temperature on the tension-tension fatigue behavior of short fiber reinforced polyamides, Polym Compos, 19, 408, 10.1002/pc.10114 McCrum, 1988 Kagan, 2004, The effects of weld geometry and glass fiber orientation on mechanical performance of joints – Part I: weld design issues, J Reinf Plast Comp, 23, 167, 10.1177/0731684404030731 Mah JC. Evaluation of vibration welds in an automotive air intake manifold. Master’s thesis, Queen’s University, Kingston, Ontario; 2002. Kagan, 1999 Horst, 1996, Mechanisms of fatigue in short glass fibre reinforced polyamide 6, Polym Eng Sci, 36, 2718, 10.1002/pen.10671 Horst, 1997, Fatigue fracture mechanisms and fractography of short-glass fibre-reinforced polyamide 6, J Mater Sci, 32, 3641, 10.1023/A:1018634530869 Hwang, 1986, Cumulative damage models and multi-stress fatigue life predication, J Compos Mater, 20, 125, 10.1177/002199838602000202 Chou, 1978, Residual strength in fatigue based on the strength-life equal rankassumption, J Compos Mater, 12, 177, 10.1177/002199837801200206 Potente, 1997, Friction welding of polyamides, Polym Eng Sci, 37, 726, 10.1002/pen.11716 Schlarb, 1989, The impact strength of butt welded vibration welds related to microstructure and welding History, Polym Eng Sci, 29, 1677, 10.1002/pen.760292309 Giese, 1993, Identification of phase 3 in the vibration welding process, 2058 Stephens, 2001