Fatigue damage of monolithic posterior computer aided designed/computer aided manufactured crowns

Lawson, 2014, Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing, J Dent, 42, 1586, 10.1016/j.jdent.2014.09.008 Choi, 2017, Load-bearing capacity of various CAD/CAM monolithic molar crowns under recommended occlusal thickness and reduced occlusal thickness conditions, J Adv Prosthodont, 9, 423, 10.4047/jap.2017.9.6.423 Okada, 2018, Fracture strength testing of crowns made of CAD/CAM composite resins, J Prosthodont Res, 62, 287, 10.1016/j.jpor.2017.10.003 Chang, 2018, Microleakage around zirconia crown margins after ultrasonic scaling with self-adhesive resin or resin modified glass ionomer cement, J Esthet Restor Dent, 30, 73, 10.1111/jerd.12348 Zhang, 2016, Fracture-resistant monolithic dental crowns, Dent Mater, 32, 442, 10.1016/j.dental.2015.12.010 Homaei, 2016, Fatigue resistance of monolithic CAD/CAM ceramic crowns on human premolars, Ceram Int, 42, 10.1016/j.ceramint.2016.07.029 Obermeier, 2018, Mechanical performance of cement- and screw-retained all-ceramic single crowns on dental implants, Clin Oral Investig, 22, 981, 10.1007/s00784-017-2178-z Lawn, 1994, Making ceramics “ductile”, Science, 263, 1114, 10.1126/science.263.5150.1114 Wang, 2013, Plastic damage induced fracture behaviors of dental ceramic layer structures subjected to monotonic load, J Prosthodont, 22, 456, 10.1111/jopr.12035 Bindl, 2002, An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns, Int J Prosthodont, 15, 451 Awada, 2015, Mechanical properties of resin-ceramic CAD/CAM restorative materials, J Prosthet Dent, 114, 587, 10.1016/j.prosdent.2015.04.016 Duan, 2015, Effect of elasticity on stress distribution in CAD/CAM dental crowns: glass ceramic vs. Polymer-matrix composite, J Dent, 43, 742, 10.1016/j.jdent.2015.01.008 Schlenz, 2019, Microleakage of composite crowns luted on CAD/CAM-milled human molars: a new method for standardized in vitro tests, Clin Oral Investig, 23, 511, 10.1007/s00784-018-2460-8 Guess, 2010, Damage and reliability of Y-TZP after cementation surface treatment, J Dent Res, 89, 592, 10.1177/0022034510363253 Stappert, 2012, Contact fatigue response of porcelain-veneered alumina model systems, J Biomed Mater Res B Appl Biomater, 100, 508, 10.1002/jbm.b.31977 Nicolaisen, 2014, Comparison of fatigue resistance and failure modes between metal-ceramic and all-ceramic crowns by cyclic loading in water, J Dent, 42, 1613, 10.1016/j.jdent.2014.08.013 Kelly, 1999, Clinically relevant approach to failure testing of all-ceramic restorations, J Prosthet Dent, 81, 652, 10.1016/S0022-3913(99)70103-4 Zhang, 2013, Fatigue of dental ceramics, J Dent, 41, 1135, 10.1016/j.jdent.2013.10.007 Coldea, 2013, In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation, J Mech Behav Biomed Mater, 26, 34, 10.1016/j.jmbbm.2013.05.004 Coldea, 2013, Mechanical properties of polymer-infiltrated-ceramic-network materials, Dent Mater, 29, 419, 10.1016/j.dental.2013.01.002 Coldea, 2015, Damage tolerance of indirect restorative materials (including PICN) after simulated bur adjustments, Dent Mater, 31, 684, 10.1016/j.dental.2015.03.007 Leung, 2015, Comparison of mechanical properties of three machinable ceramics with an experimental fluorophlogopite glass ceramic, J Prosthet Dent, 114, 440, 10.1016/j.prosdent.2015.02.024 Niem, 2019, Energy dissipation capacities of CAD-CAM restorative materials: a comparative evaluation of resilience and toughness, J Prosthet Dent, 121, 101, 10.1016/j.prosdent.2018.05.003 Ferrario, 2004, Maximal bite forces in healthy young adults as predicted by surface electromyography, J Dent, 32, 451, 10.1016/j.jdent.2004.02.009 Magne, 2013, Damping behavior of implant-supported restorations, Clin Oral Implants Res, 24, 143, 10.1111/j.1600-0501.2011.02311.x Preis, 2017, In-vitro fatigue and fracture testing of CAD/CAM-materials in implant-supported molar crowns, Dent Mater, 33, 427, 10.1016/j.dental.2017.01.003 Yildirim, 2017, Evaluation of marginal and internal adaptation of hybrid and nanoceramic systems with microcomputed tomography: an in vitro study, J Prosthet Dent, 118, 200, 10.1016/j.prosdent.2016.11.005 Mörmann, 2013, Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness, J Mech Behav Biomed Mater, 20, 113, 10.1016/j.jmbbm.2013.01.003 Stawarczyk, 2015, Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites, J Mech Behav Biomed Mater, 55, 1, 10.1016/j.jmbbm.2015.10.004 Zierden, 2018, Wear and fracture strength of new ceramic resins for chairside milling, Int J Prosthodont, 31, 74, 10.11607/ijp.5492 Nakamura, 2001, Stress analysis of metal-free polymer crowns using the three-dimensional finite element method, Int J Prosthodont, 14, 401 Kassem, 2012, Fatigue resistance and microleakage of CAD/CAM ceramic and composite molar crowns, J Prosthodont, 21, 28, 10.1111/j.1532-849X.2011.00773.x ISO, 2003 Johnson, 2014, Fracture strength of CAD/CAM composite and composite-ceramic occlusal veneers, J Prosthodont Res, 58, 107, 10.1016/j.jpor.2014.01.001 Sakaguchi, 1986, The wear of a posterior composite in an artificial mouth: a clinical correlation, Dent Mater, 2, 235, 10.1016/S0109-5641(86)80034-3 Nawafleh, 2018, The impact of core/veneer thickness ratio and cyclic loading on fracture resistance of lithium disilicate crown, J Prosthodont, 27, 75, 10.1111/jopr.12473 Jung, 2000, Lifetime-limiting strength degradation from contact fatigue in dental ceramics, J Dent Res, 79, 722, 10.1177/00220345000790020501 Shembish, 2016, Fatigue resistance of CAD/CAM resin composite molar crowns, Dent Mater, 32, 499, 10.1016/j.dental.2015.12.005 Guess, 2010, Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont, 23, 434 Silva, 2012, Reliability of reduced-thickness and thinly veneered lithium disilicate crowns, J Dent Res, 91, 305, 10.1177/0022034511433504 Wendler, 2015, Characterization of residual stresses in zirconia veneered bilayers assessed via sharp and blunt indentation, Dent Mater, 31, 948, 10.1016/j.dental.2015.05.001 Wiskott, 1995, Stress fatigue: basic principles and prosthodontic implications, Int J Prosthodont, 8, 105 Curran, 2017, Grinding damage assessment for CAD-CAM restorative materials, Dent Mater, 33, 294, 10.1016/j.dental.2016.12.004 Lührs, 2014, Curing mode affects bond strength of adhesively luted composite CAD/CAM restorations to dentin, Dent Mater, 30, 281, 10.1016/j.dental.2013.11.016 Homaei, 2016, Static and fatigue mechanical behavior of three dental CAD/CAM ceramics, J Mech Behav Biomed Mater, 59, 304, 10.1016/j.jmbbm.2016.01.023 Ankyu, 2016, Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic, Eur J Oral Sci, 124, 387, 10.1111/eos.12278 Chen, 2014, The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknesses, Dent Mater, 30, 954, 10.1016/j.dental.2014.05.018 Nakamura, 2015, Fracture resistance of monolithic zirconia molar crowns with reduced thickness, Acta Odontol Scand, 73, 602, 10.3109/00016357.2015.1007479 Homaei, 2018, Numerical fatigue analysis of premolars restored by CAD/CAM ceramic crowns, Dent Mater, 34, e149, 10.1016/j.dental.2018.03.017