Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects

A.Wickberg, G. Gustafsson, L.E. Larsson, Microstructural effects on the fatigue properties of a cast Al7SiMg alloy, SAE Technical Publication #840121, 1984 T.L. Reinhart, ASM Handbook, vol. 19, ASM International, Materials Park, OH, 1996, pp. 813–822 N.E. Promisel, Evaluation of non-ferrous materials, 1956 (cited by H.E. Boyer, Atlas of fatigue curves, American Society of Metals, 1986) Couper, 1990, Casting defects and the fatigue life of an aluminum casting alloy, Fatigue Fract. Eng. Mater. Struct., 13, 213, 10.1111/j.1460-2695.1990.tb00594.x Skallerud, 1993, Fatigue life assessment of aluminum alloys with casting defects, Eng. Fracture Mech., 44, 857, 10.1016/0013-7944(93)90108-5 J.A. Odegard, K. Pedersen, Fatigue properties of an A356 (AlSi7Mg) aluminium alloy for automotive applications – fatigue life prediction, SAE technical paper SAE-940811, 1994, pp. 25–32 Chih-Hsien Ting, A model for the long-life fatigue behaviour of small notches, Ph.D. Dissertation, University of Illinois at Urbana-Champaign, 1991 McLellan, 1996, An approach to fatigue design for aluminum castings, AFS Trans., 104, 445 Major, 1997, Porosity control and fatigue behaviour in A356T61 aluminum alloy, AFS Trans., 105, 901 Elber, 1970, Fatigue crack closure under cyclic tension, Eng. Fracture Mech., 2, 37, 10.1016/0013-7944(70)90028-7 Dowling, 1977, ASTM STP, 637, 97 D. Wilhem, J. FitzGerald, J. Carter, D. Dittmer, An empirical approach to determining K for surface cracks, in: Proceedings of the Fifth International Conference on Fracture, vol. 1, Cannes, 1981, pp. 11–21 Weibull, 1951, A statistical distribution function of wide applicability, J. App. Mech., 18, 293, 10.1115/1.4010337 Khalili, 1991, Statistical properties of weibull estimators, J. Mater. Sci., 26, 6741, 10.1007/BF02402669 J. Campbell, The origin of porosity in castings, in: Proceedings of the fourth Asia Foundry Congress incorporated in 32nd Annual Convention of Australian Foundry Institute, 1996, pp. 33–50 Q.G. Wang, Microstructure and tensile fracture behavior of Al–Si–Mg casting alloys, Ph.D. Thesis, The University of Queensland, Brisbane, Australia, 1997 Cáceres, 1995, The deformation and fracture behaviour of an Al–Si–Mg casting alloy, Mater. Sci. Eng. A, A197, 171, 10.1016/0921-5093(94)09775-5 Wang, 1998, The fracture mode in Al–Si–Mg casting alloys, Mater. Sci. Eng. A, A241, 72, 10.1016/S0921-5093(97)00476-0 Wang, 1997, On the strain hardening behavior of Al–Si–Mg casting alloys, Mater. Sci. Eng. A, 234–236A, 106, 10.1016/S0921-5093(97)00207-4 Cáceres, 1999, The effect of Mg on the microstructure and mechanical behavior of two commercial Al–Si–Mg casting alloys, Metall. Trans. A, 30A, 2611, 10.1007/s11661-999-0301-8 Wang, 1998, The cracking of Fe-rich and eutectic Si particles in an Al–7Si–0.7Mg casting alloy, AFS Trans., 106, 131 Saunders, 1975, The fracture toughness of an aluminum casting alloy, J. Aust. Inst. Metals, 20, 33 Gerard, 1990, The dependence of crack initiation on porosity during low cycle fatigue, Mater. Sci. Eng. A, 129, 77, 10.1016/0921-5093(90)90346-5 D.A. Gerard, The influence of porosity on low cycle fatigue, Ph.D. Dissertation, Michigan Technological University, Houghton, MI, 1989, pp. 1–167 J.C. Ting, The long-life regime fatigue analysis for lost foam cast Al–Si Alloy 319, Ph.D. Dissertation, University of Illinois-Champaign, IL, 1991, pp. 1–186 J. Campbell, C. Nyahumwa, N.R. Green, The concept of the fatigue potential of cast alloys, in: Proceedings of Materials Solution Conference '98 on Advances in Aluminum Casting Technology, 12–15 October 1998, pp. 225–233 Nyahumwa, 1998, Effect of mold filling turbulence on fatigue properties of cast aluminum alloys, AFS Trans., 106, 215 Newman, 1984, A crack opening stress equation for fatigue crack growth, Int. J. Fracture, 24, 131, 10.1007/BF00020751 Newman, 1982, A crack closure model for prediction of fatigue crack growth under aircraft spectrum loading, ASTM STP, 748, 53 Dowling, 1987, Fatigue crack growth and closure at high cyclic strains, Mater. Sci. Eng., 96, 99, 10.1016/0025-5416(87)90544-1 I. Gustavson, A. Melander, A finite element study of the early growth of fatigue cracks emanating from a spherical pore, in: Proceedings of the Fifth International Conference on Numerical Methods in Fracture Mechanics, Germany, 1990, pp. 225–236 Y. Verremen, J.P. Ballon, J. Masounave, Fatigue short crack propagation and plasticity-induced crack closure at the toe of a fillet welded joint, in: The Behavior of Short Fatigue Cracks, EGF publication 1, 1986, pp. 387–404 (Mechanical Engineering Publication, London)