Fatigue and Fracture behaviour of AZ31b Mg alloy plastically deformed by Constrained Groove Pressing in the Presence of Overloads

Avedesian, 1999 Borrego, 2003, Evaluation of overload effects on fatigue crack growth and closure, Eng. Fracture Mechanics, 70, 1379, 10.1016/S0013-7944(02)00119-4 Chen, 2016, Enhanced ductility in high-strength fine-grained magnesium and magnesium alloy sheets processed via multi-pass rolling with lowered temperature, Journal of Alloys and Compounds, 665, 13, 10.1016/j.jallcom.2016.01.032 Dowling, 2009, Mean stress effects in stress-life fatigue and the Walker equation, Fatigue and Fracture of Engineering Materials and Structures, 32, 163, 10.1111/j.1460-2695.2008.01322.x Duran, 2015, Some remarks on the engineering application of the fatigue crack growth approach under nonzero mean loads, Front. Mech. Eng., 10, 255, 10.1007/s11465-015-0342-1 Fong, 2015, Effect of Deformation and Temperature Paths in Severe Plastic Deformation Using Groove Pressing on Microstructure, Texture, and Mechanical Properties of AZ31-O, Journal of Manufacturing Science and Engineering, 137, 051001, 10.1115/1.4031021 Hana, 2016, Enhanced mechanical properties of AZ31 magnesium alloy sheets by continuous bending process after V-bending, Progress in Natural Science: Materials International, 26, 97, 10.1016/j.pnsc.2016.01.005 He, 2016, Improving the room temperature stretch formability of a Mg alloy thin sheet by pre-twinning, Materials Science & Engineering A, 655, 1, 10.1016/j.msea.2015.12.070 Hongxia, 2011, As-extruded AZ31B Magnesium Alloy Fatigue Crack Propagation Behavior, Journal Wuhan University of Technology Materials Science Edition, 26, 1114, 10.1007/s11595-011-0373-3 Irwin, 1968, Linear Fracture Mechanics, fracture transition, and fracture control, Eng. Fract. Mech., 1, 214, 10.1016/0013-7944(68)90001-5 Koike, 2015, The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys, Acta Materialia, 51, 2055, 10.1016/S1359-6454(03)00005-3 Livieri, 2016, A non-linear model for the fatigue assessment of notched components under fatigue loadings, International Journal of Fatigue, 82, 624, 10.1016/j.ijfatigue.2015.09.019 Mehrzadi, 2013, A material sensitive modified Wheeler model for predicting the retardation in fatigue response of AM60B due to an overload, Int. Journal of Fatigue, 55, 220, 10.1016/j.ijfatigue.2013.06.022 Murakami, 1987 Onn, 2015, Fatigue characteristics of dual-phase steel sheets, Journal of Mechanical Science and Technology, 29, 51, 10.1007/s12206-014-1208-x Salvati E., O’Connor S., Sui T., Nowell D., Korsunsky A.M., 2016. A Study of Overload Effect on Fatigue Crack Propagation Using EBSD, FIB-DIC and FEM Methods. Engineering Fracture Mechanics. (Under review). Song, 2015, Enhancing stretch formability of rolled Mg sheets by pre-inducing contraction twins and recrystallization annealing, Materials Science & Engineering A, 627, 369, 10.1016/j.msea.2015.01.027 Walker, 1970, The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminium. In: Rosenfeld M, ed. Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462, 1 Wheeler, 1972, Spectrum loading and crack growth, J. of Basic Eng., 94, 181, 10.1115/1.3425362 Xiaoping, 2008, An engineering model of fatigue crack growth under variable amplitude loading, Int. Journal of Fatigue. Yang, 2006, Production of Ultrafine-Grain Microstructure in Mg Alloy by Alternate Biaxial Reverse Corrugation,”, Acta Mater, 54, 5147, 10.1016/j.actamat.2006.06.045 Yuen, 2006, Proposed modifications to the Wheeler retardation model for multiple overloading fatigue life prediction, International Journal of Fatigue, 28, 1803, 10.1016/j.ijfatigue.2005.12.007 Zheng, 1997, A Method To Reduce The Scatter In Fatigue Crack Growth Rate Data, Fatigue Fract. Engng Mater. Struct., 20, 1341, 10.1111/j.1460-2695.1997.tb01492.x