Fatigue Crack Growth Fundamentals in Shape Memory Alloys

Duerig TW, Melton K, Stockel D, Wayman C (1990) Engineering aspects of shape memory alloys. Butterworth-Heinemann, London

Otsuka K, Wayman CM (eds) (1998) Shape memory materials. Cambridge University Press, Cambridge

McMeeking RM, Evans AG (1982) Mechanics of transformation-toughening in brittle materials. J Am Ceram Soc 65:242–246

Rice JR (1972) Some remarks on elastic crack-tip stress fields. Int J Solids Struct 8:751–758. doi: 10.1016/0020-7683(72)90040-6

Xiong F, Liu Y (2007) Effect of stress-induced martensitic transformation on the crack tip stress-intensity factor in Ni-Mn-Ga shape memory alloy. Acta Mater 55:5621–5629. doi: 10.1016/j.actamat.2007.06.031

Irwin GR (1960) Plastic zone near a crack and fracture toughness. In: Proceedings of the Sagamore Res Ord Materials Section IV, pp 63–71

Baxevanis T, Parrinello AF, Lagoudas DC (2013) On the fracture toughness enhancement due to stress-induced phase transformation in shape memory alloys. Int J Plast 50:158–169. doi: 10.1016/j.ijplas.2013.04.007

Lexcellent C, Thiebaud F (2008) Determination of the phase transformation zone at a crack tip in a shape memory alloy exhibiting asymmetry between tension and compression. Scripta Mater 59:321–323. doi: 10.1016/j.scriptamat.2008.03.040

Stam G, van der Giessen E (1995) Effect of reversible phase transformations on crack growth. Mech Mater 21:51–71. doi: 10.1016/0167-6636(94)00074-3

Brown LC (1979) The fatigue of pseudoelastic single crystals of α-CuAINi. Metall Mater Trans A 10:217–224. doi: 10.1007/BF02817631

Delaey L, Janssen J, Van de Mosselaer D, Dullenkopf G, Deruyttere A (1978) Fatigue properties of pseudoelastic Cu·Zn·Al alloys. Scripta Metall. 12:373–376. doi: 10.1016/0036-9748(78)90302-2

Hornbogen E, Eggeler G (2004) Surface aspects in fatigue of shape memory alloys (SMA). Mater. Werkst 35:255–259. doi: 10.1002/mawe.200400759

Melton KN, Mercier O (1979) Fatigue of NiTi thermoelastic martensites. Acta Metall 27:137–144

Miyazaki S, Mizukoshi K, Ueki T, Sakuma T, Liu Y (1999) Fatigue life of Ti–50 at.% Ni and Ti–40Ni–10Cu (at.%) shape memory alloy wires. In: ICOMAT 98. International conference on martensitic transformations, 7–11 Dec. 1998. Elsevier, pp 658–663. doi: 10.1016/s0921-5093(99)00344-5

Sade M, Hornbogen E (1988) Fatigue of single- and polycrystalline—CuZn-base shape memory alloys. Z Metall 79:782–787

Yang NYC, Laird C, Pope DP (1977) The cyclic stress–strain response of polycrystalline, pseudoelastic Cu-14.5 wt pct Al-3 wt pct Ni alloy. Metall Mater Trans A 8:955–962. doi: 10.1007/BF02661579

McKelvey AL, Ritchie RO (1999) Fatigue-crack propagation in Nitinol, ashape-memory and superelastic endovascular stent material. J Biomed Mater Res 47:301–308

McKelvey AL, Ritchie RO (2001) Fatigue-crack growth behavior in the superelastic and shape-memory alloy nitinol. Metall Mater Trans A 32:731–743. doi: 10.1007/s11661-001-1008-7

Robertson SW, Mehta A, Pelton AR, Ritchie RO (2007) Evolution of crack-tip transformation zones in superelastic nitinol subjected to in situ fatigue: a fracture mechanics and synchrotron X-ray microdiffraction analysis. Acta Mater 55:6198–6207

Holtz RL, Sadananda K, Imam MA (1996) Near-threshold fatigue crack growth behavior of nickel-titanium shape memory alloys. In: Johannes Weertman symposium. Proceedings of a symposium held during the TMS annual meeting, 4–8 Feb. 1996, Warrendale, pp 297–299

Vaidyanathan R, Dunand DC, Ramamurty U (2000) Fatigue crack-growth in shape-memory NiTi and NiTi–TiC composites. Mater Sci Eng A 289:208–216. doi: 10.1016/S0921-5093(00)00882-0

Wang J, Sehitoglu H (2014) Martensite modulus dilemma in monoclinic NiTi-theory and experiments. Int J Plast 61:17–31. doi: 10.1016/j.ijplas.2014.05.005

Hatcher N, Kontsevoi OY, Freeman AJ (2009) Role of elastic and shear stabilities in the martensitic transformation path of NiTi. Phys Rev B 80:144203

Wagner MFX, Windl W (2008) Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles. Acta Mater 56:6232

Eshelby JD (1957) The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc R Soc Lond Ser A Math Phys Sci 241:376–396. doi: 10.2307/100095

Sih GC, Paris PC, Irwin GR (1965) On cracks in rectilinearly anisotropic bodies. Int J Fract Mech 1:189–203. doi: 10.1007/BF00186854

Efstathiou C, Sehitoglu H, Carroll J, Lambros J, Maier HJ (2008) Full-field strain evolution during intermartensitic transformations in single-crystal NiFeGa. Acta Mater 56:3791–3799. doi: 10.1016/j.actamat.2008.04.033

Efstathiou C, Sehitoglu H, Lambros J (2010) Multiscale strain measurements of plastically deforming polycrystalline titanium: role of deformation heterogeneities. Int J Plast 26:93

Hamilton ARF, Sehitoglu H, Efstathiou C, Maier HJ (2007) Mechanical response of NiFeGa alloys containing second-phase particles. Scripta Mater 57:497–499

Saburi T, Nenno S (1981) The shape memory effect and related phenomena. In: Aaronson HI, Laughlin DE, Sekerka RF, Wayman CM (eds) International conference on solid-solid phase transformations, Pittsburgh, pp 1455–1479

Kresse G, Furthmuller J (1996) Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys Rev B 54:11169

Rodriguez PL, Lovey FC, Guenin G, Pelegrina JL, Sade M, Morin M (1993) Elastic constants of the monoclinic 18R martensite of a CuZnAl alloy. Acta Metall Mater 41(11):3307–3310

Verlinden B, Suzuki T, Delaey L, Guenin G (1984) Third order elastic constants of β Cu-Zn-Al as a function of the temperature. Scripta Metall 18:975–979

Ranganathan SI, Ostoja-Starzewski M (2008) Universal elastic anisotropy index. Phys Rev Lett 101(5):055504

Carroll J, Efstathiou C, Lambros J, Sehitoglu H, Hauber B, Spottswood S, Chona R (2009) Investigation of fatigue crack closure using multiscale image correlation experiments. Eng Fract Mech 76(15):2384–2398

Pérez-Landazábal JI, Recarte V, Sánchez-Alarcos V, Rodríguez-Velamazán JA, Jiménez-Ruiz M, Link P, Cesari E, Chumlyakov YI (2009) Lattice dynamics and external magnetic-field effects in Ni-Fe-Ga alloys. Phys Rev B 80(14):144301

Ren X, Miura N, Zhang J, Otsuka K, Tanaka K, Koiwa M, Suzuki T, Chumlyakov YI, Asai M (2001) A comparative study of elastic constants of Ti-Ni based alloys prior to martensitic transformation. Mater Sci Eng A 312:196–206

Mura T (1987) Micromechanics of defects in solids, vol 3. Springer

Chowdhury PB, Sehitoglu H, Rateick RG (2014) Predicting fatigue resistance of nano-twinned materials: Part I—role of cyclic slip irreversibility and Peierls stress. Int J Fatigue 68:277–291

Chowdhury PB, Sehitoglu H, Rateick RG (2014) Predicting fatigue resistance of nano-twinned materials: Part II—effective threshold stress intensity factor range. Int J Fatigue 68:292–301

Sehitoglu H, Wang J, Maier HJ (2012) Transformation and slip behavior of Ni2FeGa. Int J Plast 39:61–74

Sehitoglu H, Zhang XY, Chumlyakov YI, Karaman I, Gall K, Maier HJ (2002) Observations on stress-induced transformations in NiTi alloys. In: IUTAM symposium on mechanics of martensitic phase transformation in solids. Springer, New York, pp 103–109

Sehitoglu H, Karaman I, Anderson R, Zhang X, Gall K, Maier HJ, Chumlyakov Y (2000) Compressive response of NiTi single crystals. Acta Mater 48(13):3311–3326