Fast solvent screening for counter-current liquid–liquid extraction columns
Tóm tắt
Từ khóa
Tài liệu tham khảo
Abbasi S, Diwekar UM (2014) Characterization and stochastic modelling of uncertainties in the biodiesel production. Clean Technol Environ Policy 16(1):79–94
AspenPlus® (2014) www.aspentech.com/products/aspen-plus.aspx . Accessed 20 Dec 2014
Attarakih M, Bart H-J (2014) Solution of the population balance equation using the differential maximum entropy method (DMaxEntM): an application to liquid extraction columns. Chem Eng Sci 108:123–133
Berg Ll (1995) Separation of ethyl benzene from p-xylene by extractive distillation. US Patent No. 5 425 855
Birajdar SD, Padmanabhan S, Rajagopalan S (2014) Rapid solvent screening using thermodynamic models for recovery of 2,3-butanediol from fermentation by liquid–liquid extraction. J Chem Eng Data 59:2456–2463
Bonet J, Plesu V, Bonet Ruiz AE, Iancu P, Costa J (2014a) Use of dynamic computer simulation for indoor exposure assessment based on chronogram incident as air pollution source characterization. Clean Technol Environ Policy 16(5):971–977
Bonet J, Plesu V, Bonet-Ruiz AE, Tuluc A, Llorens J, Iancu P (2014b) Minimum solvent flow rate for counter-current liquid–liquid extraction columns. Chem Eng Trans 39:1771–1776
Bonet-Ruiz AE, Bonet J, Pleşu V, Bozga G (2010) Environmental performance assessment for reactive distillation processes. Resour Conserv Recycl 54(5):315–325
Brondani M, Hoffmann R, Dias Mayer F, Schmidt Kleinert J (2015) Environmental and energy analysis of biodiesel production in Rio Grande do Sul, Brazil. Clean Technol Environ Policy 17:129–143
Buchbender F, Fischer A, Pfennig A (2013) Influence of compartment geometry on the residence time of single drops in Kühni extraction columns. Chem Eng Sci 104:701–716
Caballero JA, Grossmann IE (2009) Rigorous design of complex liquid-liquid multi-staged extractors combining mathematical programming and process simulators. Comput Aided Chem Eng 27(C):981–986
Caetano NS, Silva VFM, Melo AC, Martins AA, Mata TM (2014) Spent coffee grounds for biodiesel production and other applications. Clean Technol Environ Policy 16(7):1423–1430
Carvalho A, Mimoso AF, Mendes AN, Matos HA (2014) From a literature review on a framework for environmental process impact assessment index. J Clean Prod 64:36–62
Chang D-S, Yeh L-T, Liu W (2014) Incorporating the carbon footprint to measure industry context and energy consumption effect on environmental performance of business operations. Clean Technol Environ Policy. doi: 10.1007/s10098-014-0785-9
Čuček L, Lam HL, Klemeš JJ, Varbanov PS, Kravanja Z (2010) Synthesis of regional networks for the supply of energy and bioproducts. Clean Technol Environ Policy 12(6):635–645
Damartzis T, Papadopoulos AI, Seferlis P (2014) Optimum synthesis of solvent-based post-combustion CO2 capture flowsheets through a generalized modeling framework. Clean Technol Environ Policy 16(7):1363–1380
Demesa AG, Laari A, Tirronen E, Turunen I (2015) Comparison of solvents for the recovery of low-molecular carboxylic acids and furfural from aqueous solutions. Chem Eng Res Des 93:531–540
Dhanalakshmi Sridevi V, Rema T, Srinivasan SV (2015) Studies on biogas production from vegetable market waste in a two-phase anaerobic reactor. Clean Technol Environ Policy 17(2):359–371
Diwekar U, Shastri Y (2011) Design for the environment: a state-of-the-art review. Clean Technol Environ Policy 13(2):227–240
Doshi R, Diwekar U, Benavides PT, Yenkie KM, Cabezas H (2014) Maximizing sustainability of ecosystem model through socio-economic policies derived from multivariable optimal control theory. Clean Technol Environ Policy. doi: 10.1007/s10098-014-0889-2
European Commission (2010) ILCD handbook: analysis of existing environmental impact assessment methodologies for use in life cycle assessment. http://eplca.jrc.ec.europa.eu/uploads/ILCD-Handbook-LCIA-Background-analysis-online-12March2010.pdf . Accessed 13 Jan 2015
Fathima A, Aravindhan R, Rao JR, Nair BU (2015) Biomass of Termitomyces clypeatus for chromium(III) removal from chrome tanning wastewater. Clean Technol Environ Policy 17(2):541–547
Fiksel J, Bruins R, Gatchett A, Gilliland A, Ten Brink M (2014) The triple value model: a systems approach to sustainable solutions. Clean Technol Environ Policy 16(4):691–702
Garcia J, Garcia S, Larriba M, Torrecilla JS, Rodriguez F (2011) Comparative evaluation of [imidazolium][tfn] and [pyridinium][tf2n] ionic liquid for the liquid–liquid extraction of aromatics. Chem Eng Trans 24:805–810. doi: 10.3303/CET1124135
Gutiérrez-Arriaga CG, Serna-González M, Ponce-Ortega JM, El-Halwagi MM (2013) Multi-objective optimization of steam power plants for sustainable generation of electricity. Clean Technol Environ Policy 15(4):551–566
Hashem MA, Aimaghrabi MN (2013) Modelling mass transfer coefficients during drop formation. J Eng Sci Technol Rev 6(1):7–13
Intergovernmental Panel on Climate Change—IPCC (2007) Climate change 2007—the physical science basis contribution of working Group I to the Fourth Assessment Report of the IPCC. www.ipcc.ch/pdf/assessment-report/ar4/wg1/ar4_wg1_full_report.pdf . Accessed 13 Jan 2015
Kamp J, Kraume M (2014) Influence of drop size and superimposed mass transfer on coalescence in liquid/liquid dispersions—test cell design for single drop investigations. Chem Eng Res Des 92(4):635–643
Keasler SJ, Lewin JL, Siepmann JI, Gryska NM, Ross RB, Schultz NE, Nakamura M (2013) Molecular insights for the optimization of solvent-based selective extraction of ethanol from fermentation broths. AIChE J 59(8):3065–3070
Koellner T, Scholz RW (2008) Assessment of land use impacts on the natural environment—part 2: generic characterization factors for local species diversity in central Europe. Int J Life Cycle Assess 13(1):32–48
Kraemer K, Harwardt A, Bronneberg R, Marquardt W (2011) Separation of butanol from acetone–butanol–ethanol fermentation by a hybrid extraction–distillation process. Comput Chem Eng 35(5):949–963
Lade VG, Pakhare AD, Rathod VK (2014) Mass transfer studies in pulsed sieve plate extraction column for the removal of tributyl phosphate from aqueous nitric acid. Ind Eng Chem Res 53(12):4812–4820
Lao-Luque C, Solé M, Gamisans X, Valderrama C, Dorado AD (2014) Characterization of chromium (III) removal from aqueous solutions by an immature coal (leonardite). Toward a better understanding of the phenomena involved. Clean Technol Environ Policy 16(1):127–136
Lek-utaiwan P, Suphanit B, Douglas PL, Mongkolsiria N (2011) Design of extractive distillation for the separation of close-boiling mixtures: solvent selection and column optimization. Comput Chem Eng 35:1088–1100
Mahdavi S, Jalali M, Afkhami A (2015) Heavy metals removal from aqueous solutions by Al2O3 nanoparticles modified with natural and chemical modifiers. Clean Technol Environ Policy 17(1):85–102
Minotti M, Doherty MF, Malone MF (1998) Economic tradeoffs for extraction systems. Chem Eng Res Des 76(3):361–367
Molinos-Senante M, Hernandez-Sancho F, Sala-Garrido R (2014) Benchmarking in wastewater treatment plants: a tool to save operational costs. Clean Technol Environ Policy 16(1):149–161
Nadgir VM, Liu YA (1983) Studies in chemical process design and synthesis: part V: a simple heuristic method for systematic synthesis of initial sequences for multicomponent separations. AIChE J 29(6):926–934
Nethaji S, Sivasamy A (2014) Removal of hexavalent chromium from aqueous solution using activated carbon prepared from walnut shell biomass through alkali impregnation processes. Clean Technol Environ Policy 16(2):361–368
O’Connell D, Savelski M, Slater CS (2013) Life cycle assessment of dewatering routes for algae derived biodiesel processes. Clean Technol Environ Policy 15(4):567–577
Outili N, Meniai A-H, Gneist G, Bart HJ (2009) A general correlation for the dispersed phase mass transfer coefficient for single drop systems in liquid–liquid extraction columns. Chem Eng Trans 17:615–620. doi: 10.3303/CET0917103
Ozdemir U, Ozbay I, Ozbay B, Veli S (2014) Application of economical models for dye removal from aqueous solutions: cash flow, cost-benefit, and alternative selection methods. Clean Technol Environ Policy 16(2):423–429
Plesu AE, Bonet J, Plesu V, Bozga G, Galan MI (2008) Residue curves map analysis for tert-amyl methyl ether synthesis by reactive distillation in kinetically controlled conditions with energy-saving evaluation. Energy 33:1572–1589
Plesu V, Bonet Ruiz AE, Bonet J, Llorens J, Iancu P (2013) Minimum number of transfer units and reboiler duty for multicomponent distillation columns. Appl Therm Eng 61(1):67–79
Plesu V, Subirana Puigcasas J, Benet Surroca G, Bonet J, Bonet Ruiz AE, Tuluc A, Llorens J (2015) Process intensification in biodiesel production with energy reduction by pinch analysis. Energy 79:273–287
ProCAMD® (2014) www.capec.kt.dtu.dk/Software/ICAS-and-its-Tools/ICAS-Toolboxes7 . Accessed 20 Dec 2014
Recker S, Skiborowski M, Redepenning C, Marquardt W (2014) Systematic and optimization-based design of integrated reaction-separation processes. Comput Aided Chem Eng 34:417–422
Redepenning C, Skiborowski M, Marquardt W (2013) Shortcut method for the design of extraction columns for multi-component mixture separations. Comput Aided Chem Eng 32:1039–1044
Remenárová L, Pipíška M, Florková E, Horník M, Rozložník M, Augustín J (2014) Zeolites from coal fly ash as efficient sorbents for cadmium ions. Clean Technol Environ Policy 16(8):1551–1564
Romero MD, Gómez JM, Díez E, Escudero MJ, Díaz I (2009) Liquid–liquid equilibrium data of limonene + octanal + solvent systems. Chem Eng Trans 17:1473–1478
Rosenbaum RK, Bachmann TM, Gold LS et al (2008) USEtox—the UNEP-SETAC toxicity model: recommended characterisation factors for human toxicity and freshwater ecotoxicity in life cycle impact assessment. Int J Life Cycle Assess 13(7):532–546
Ryberg M, Vieira MDM, Zgola M, Bare J, Rosenbaum RK (2014) Updated US and Canadian normalization factors for TRACI 2.1. Clean Technol Environ Policy 16(2):329–339
Shonnard DR, Hiew DS (2000) Comparative environmental assessments of VOC recovery and recycle design alternatives for a gaseous waste stream. Environ Sci Technol 34(24):5222–5228
Shukla SK, Kumar A (2014) Polarity issues in room temperature ionic liquids. Clean Technol Environ Policy. doi: 10.1007/s10098-014-0864-y
Sica M, Duta A, Teodosiu C, Draghici C (2014) Thermodynamic and kinetic study on ammonium removal from a synthetic water solution using ion exchange resin. Clean Technol Environ Policy 16(2):351–359
Sukumar C, Janaki V, Kamala-Kannan S, Shanthi K (2014) Biosorption of chromium(VI) using Bacillus subtilis SS-1 isolated from soil samples of electroplating industry. Clean Technol Environ Policy 16(2):405–413
TEST® (2014) www.epa.gov/nrmrl/std/qsar/qsar.html#TEST . Accessed 24 Dec 2014
Tseng ML, Lin YH, Chiu ASF, Liao JCH (2008) Using FANP approach on selection of competitive priorities based on cleaner production implementation: a case study in PCB manufacturer, Taiwan. Clean Technol Environ Policy 10(1):17–29
Uçar S, Erdem M, Tay T, Karagöz S (2015) Removal of lead (II) and nickel (II) ions from aqueous solution using activated carbon prepared from rapeseed oil cake by Na2CO3 activation. Clean Technol Environ Policy 17(3):747–756
Vázquez-Ojeda M, Segovia-Hernández JG, Hernández S, Hernández-Aguirre A, Kiss AA (2013) Optimization of an ethanol dehydration process using differential evolution algorithm. Comput Aided Chem Eng 32:217–222
Venkatesan G, Senthilnathan U, Rajam S (2014) Cadmium removal from aqueous solutions using hybrid eucalyptus wood based activated carbon: adsorption batch studies. Clean Technol Environ Policy 16(1):195–200
Villwock J, Gebauer F, Kamp J, Bart H-J, Kraume M (2014) Systematic analysis of single droplet coalescence. Chem Eng Technol 37(7):1103–1111
Vinodh S, Jayakrishna K, Joy D (2012) Environmental impact assessment of an automotive component using eco-indicator and CML methodologies. Clean Technol Environ Policy 14(2):333–344
WAR® (2014) www.epa.gov/nrmrl/std/war/sim_war.htm . Accessed 20 Dec 2014
Young DM, Cabezas H (1999) Designing sustainable processes with simulation: the waste reduction (WAR) algorithm. Comput Chem Eng 23(10):1477–1491