Failure of Cementless Fixation of the Femoral Component in Total Hip Arthroplasty

Andriaachi, 1976, A stress analysis of the femoral stem in total hip prostheses, J Bone Joint Surg, 58(A), 618, 10.2106/00004623-197658050-00006 Cameron, 1973, The effect of movement on the bonding of porous metal to bone, J Biomed Mater Res, 7, 301, 10.1002/jbm.820070404 Charnely, 1975, Fracture of femoral prostheses in total hip replacement, Clin Orthop, 111, 105, 10.1097/00003086-197509000-00014 Christel, 1986, The applications of carbon-fiber-reinforced carbon composites (CFRC) in orthopaedic surgery, CRC Crit Rev Biocompatibility, 2, 189 Christel, 1987, The development of a carbon-carbon hip prosthesis, J Biomed Mater Res, 21, 191 Collier, 1976, Bone ingrowth into dynamically loaded porous-coated intramedullary nails, J Biomed Mater Res, 7, 485, 10.1002/jbm.820100403 Cook, 1980, The influence of design parameters on calcar stresses following femoral head arthroplasty, J Biomed Mater Res, 14, 133, 10.1002/jbm.820140204 Davy, 1988, Telemetric force measurements across the hip after total arthroplasty, J Bone Joint Surg, 70(A), 45, 10.2106/00004623-198870010-00008 Diegel, 1989, Initial effect of collarless stem stiffness on femoral bone strain, J Arthroplasty, 4, 173, 10.1016/S0883-5403(89)80071-3 Engelhardt, 1988, Effect of femoral component section modulus on the stress distribution in the proximal human femur, Med Biol Eng Comput, 26, 38, 10.1007/BF02441826 Engh, 1991, Recent advances in cementless total hip arthroplasty technique, Tech Orthop, 6, 59, 10.1097/00013611-199109000-00008 English, 1979, In vivo records of hip loads using a femoral implant with telemetric output: A preliminary report, J Biomed Eng, 1, 111, 10.1016/0141-5425(79)90066-9 Fitzgerald, 1988, The uncemented total hip arthroplasty: Intraoperative femoral fractures, Clin Orthop, 235, 61, 10.1097/00003086-198810000-00007 Freeman, 1986, Why resect the neck?, J Bone Joint Surg, 68(B), 346, 10.1302/0301-620X.68B3.3733794 Hierton, 1983, Factors leading to rearthroplasty in a material with radiographically loose total hip prostheses, Acta Orthop Scand, 54, 562, 10.3109/17453678308992889 Huiskes, 1989, Adaptive bone remodeling and biomechanical design considerations for noncemented total hip arthroplasty, Orthopedics, 12, 1255, 10.3928/0147-7447-19890901-15 Lewis, 1984, The influence of prosthetic stem stiffness and of a calcar collar on stresses in the proximal end of the femur with a cemented femoral component, J Bone Joint Surg, 66(A), 280, 10.2106/00004623-198466020-00016 Manley, 1990, Effect of stem design parameters, stem fit and bone quality on the torsional stability of femoral stems Morscher, 1983, Cementless fixation of “isoelastic” hip endoprostheses manufactured from plastic materials, Clin Orthop, 176, 77 Mukherjee, 1991, Mechanical and nondestructive evaluations of a carbon-carbon composite material, Trans Orthop Res Soc, 37, 498 Noble, 1988, The anatomic basis of femoral component design, Clin Orthop, 235, 148, 10.1097/00003086-198810000-00015 Oh, 1978, Proximal strain distribution in the loaded femur, J Bone Joint Surg, 60(A), 75, 10.2106/00004623-197860010-00010 Ohl MD, Whiteside LA, McCarthy DS, et al: Torsional fixation of the Standard Range of Motion (S-ROM) modular femoral hip component. Clin Orthop, in press Otani, 1991, Biomechanics between cementless femoral component and femur: Fixation and stress transfer Otani, 1990, Effects of femoral component material properties on micromotion and subsidence in THA: A comparison study between carbon-carbon composite and titanium alloy, Trans SIROT, 5, 278 Otani, 1991, Strain distribution changes in the proximal femur caused by metallic and flexible composite femoral components under axial and torsional loads, Trans Soc Biomater, 17, 26 Otani, 1991, Strain distribution changes in the proximal femur caused by metallic and flexible composite femoral components under torsional load, Trans Orthop Res Soc, 37, 267 Otani, 1991, Strain in the intact proximal femur under axial and torsional loads, Trans Orthop Res Soc, 37, 511 Otani, 1991, Effects of femoral component flexibility on cementless fixation in total hip arthroplasty, Trans Soc Biomater, 17, 20 Pilliar, 1986, Observation on the effect of movement on bone ingrowth into poroussurfaced implants, Clin Orthop, 208, 108, 10.1097/00003086-198607000-00023 Reilly, 1974, The elastic modulus for bone, J Biomech, 7, 271, 10.1016/0021-9290(74)90018-9 Reuben, 1991, Femoral fracture during cementless total hip arthroplasty, Trans Orthop Res Soc, 37, 219 Ritter, 1990, A porous polyethylene-coated femoral component of a total hip arthroplasty, J Arthroplasty, 5, 83, 10.1016/S0883-5403(06)80014-8 Rydell, 1966, Forces acting on the femoral head-prosthesis: A study on strain gauge supplied prostheses in living persons, Acta Orthop Scand (Suppl 88), 37, 1, 10.3109/ort.1966.37.suppl-88.01 Sandborn, 1987, The effect of surgical fit on bone browth into porous coated implants, Trans Orthop Res Soc, 33, 217 Schwartz, 1989, Femoral fracture during non-cemented total hip arthroplasty, J Bone Joint Surg, 71(A), 1135, 10.2106/00004623-198971080-00003 Soballe, 1991, Hydroxyapatite implant coating modifies membrane formation during unstable mechanical conditions, Trans Orthop Res Soc, 16, 35 Stuchin, 1990, Femoral shaft fracture in porous and press-fit total hip arthroplasty, Orthop Rev, 19, 153 Sugiyama, 1990, Torsional fixation of the femoral component in total hip replacement: The effect of surgical press-fit technique, Trans Orthop Res Soc, 36, 258 Thomas, 1986, The CAD hip arthroplasty: Five to ten year follow-up, J Bone Joint Surg, 68(A), 640, 10.2106/00004623-198668050-00002 Tullos, 1984, Total hip arthroplasty with a low-modulus porous-coated femoral component, J Bone Joint Surg, 66(A), 888, 10.2106/00004623-198466060-00009 Whiteside, 1989, Effect of stem fit on bone hypertrophy and pain relief in cementless total hip replacement, Clin Orthop, 247, 138, 10.1097/00003086-198910000-00023 Whiteside, 1989, The effect of collar and distal stem fixation on micromotion of the femoral stem in uncemented total hip arthroplasty, Clin Orthop, 239, 146, 10.1097/00003086-198902000-00015 Williams, 1968, A force analysis of the hip joint, Biomed Eng, 3, 365 Wroblewski, 1979, The mechanism of fracture of the femoral prosthesis in total hip replacement, Int Orthop, 3, 137, 10.1007/BF00266883