Failure load and stress analysis of orthodontic miniscrews with different transmucosal collar diameter

Alander, 2005, The span length and cross-sectional design affect values of strength, Dent. Mater., 21, 347, 10.1016/j.dental.2004.05.009 Albogha, 2015, Generic finite element models of orthodontic mini-implants: are they reliable?, J. Biomech., 48, 3751, 10.1016/j.jbiomech.2015.08.015 Antoszewska-Smith, 2017, Effectiveness of orthodontic miniscrew implants in anchorage reinforcement during en-masse retraction: a systematic review and meta-analysis, Am. J. Orthod. Dentofac. Orthop., 151, 440, 10.1016/j.ajodo.2016.08.029 Cacciafesta, 2004, A 12 month clinical study of bond failures of recycled versus new stainless steel orthodontic brackets, Eur. J. Orthod., 26, 449, 10.1093/ejo/26.4.449 Cacciafesta, 2007, Flexural strengths of fiber-reinforced composites polymerized with conventional light-curing and additional postcuring, Am. J. Orthod. Dentofac. Orthop., 132, 524, 10.1016/j.ajodo.2005.09.036 Cacciafesta, 2008, Force levels of fiber-reinforced composites and orthodontic stainless steel wires: a 3-point bending test, Am. J. Orthod. Dentofac. Orthop., 133, 410, 10.1016/j.ajodo.2006.01.047 Cantarella, 2013, The dynforce archwire, Ann. Stomatol. (Roma)., 4, 204 Cao, 2013, A simple way to intrude overerupted upper second molars with miniscrews, J. Prosthodont., 22, 597, 10.1111/jopr.12057 Choi, 2015, Scar formation and revision after the removal of orthodontic miniscrews, Korean J. Orthod., 45, 146, 10.4041/kjod.2015.45.3.146 El Nigoumi, 2016, An upper-molar distalizer with palatal miniscrew anchorage, J. Clin. Orthod., 50, 767 Ganzer, 2016, Pain and discomfort following insertion of miniscrews and premolar extractions: a randomized controlled trial, Angle Orthod., 86, 891, 10.2319/123115-899.1 Jolley, 2007, Peak torque values at fracture of orthodontic miniscrews, J. Clin. Orthod., 41, 326 Kravitz, 2007, Risks and complications of orthodontic miniscrews, Am. J. Orthod. Dentofac. Orthop., 131, S43, 10.1016/j.ajodo.2006.04.027 Kuroda, 2014, Risks and complications of miniscrew anchorage in clinical orthodontics, Jpn. Dent. Sci. Rev., 50, 79, 10.1016/j.jdsr.2014.05.001 Lim, 2013, Endodontic and surgical treatment of root damage caused by orthodontic miniscrew placement, J. Endod., 39, 1073, 10.1016/j.joen.2013.04.037 McGuire, 2006, Temporary anchorage devices for tooth movement: a review and case reports, J. Periodontol., 77, 1613, 10.1902/jop.2006.060127 Melo, 2016, Risk factors associated with the failure of miniscrews – a ten-year cross sectional study, Braz. Oral Res., 30, e124, 10.1590/1807-3107BOR-2016.vol30.0124 Mesko, 2013, Can we close large prosthetic space with orthodontics?, Int. J. Orthod. Milwaukee, 24, 41 Mizrahi, 2016, The use of miniscrews in orthodontics: a review of selected clinical applications, Prim. Dent. J., 5, 20, 10.1308/205016816820209569 Motoyoshi, 2015, Maxillary sinus perforation by orthodontic anchor screws, J. Oral Sci., 57, 95, 10.2334/josnusd.57.95 Mouhyi, 1998, An XPS and SEM evaluation of six chemical and physical techniques for cleaning of contaminated titanium implants, Clin. Oral Implants Res., 9, 185, 10.1034/j.1600-0501.1998.090306.x Patil, 2015, Surface deterioration and elemental composition of retrieved orthodontic miniscrews, Am. J. Orthod. Dentofac. Orthop., 147, S88, 10.1016/j.ajodo.2014.10.034 Pick, 2010, A critical view on biaxial and short-beam uniaxial flexural strength tests applied to resin composites using Weibull, fractographic and finite element analyses, Dent. Mater., 26, 83, 10.1016/j.dental.2009.09.002 Pires, 2011, Use of orthodontic mini-implants for maxillomandibular fixation in mandibular fracture, Craniomaxillofac. Trauma Reconstr., 4, 213, 10.1055/s-0031-1293522 Ramakrishnaiah, 2017, Preliminary fabrication and characterization of electron beam melted Ti-6Al-4V customized dental implant, Saudi J. Biol. Sci., 24, 787, 10.1016/j.sjbs.2016.05.001 Reicheneder, 2008, Mechanical loading of orthodontic miniscrews – significance and problems: an experimental study, Biomed. Tech. (Berl.), 53, 242, 10.1515/BMT.2008.038 Roberts-Harry, 2004, Orthodontics. Part 9: anchorage control and distal movement, Br. Dent. J., 196, 255, 10.1038/sj.bdj.4811031 Rodriguez y Baena, 2016, Extrusion of severely impacted mandibular first molar using partial orthodontics and temporary anchorage miniscrews, Eur. J. Paediatr. Dent., 17, 310 Scribante, 2016, Orthodontics: bracket materials, adhesives systems, and their bond strength, Biomed. Res. Int., 2016, 1329814, 10.1155/2016/1329814 Sfondrini, 2012, Reconditioning of self-ligating brackets, Angle Orthod., 82, 158, 10.2319/033011-227.1 Sfondrini, 2013, Shear bond strength of orthodontic brackets and disinclusion buttons: effect of water and saliva contamination, Biomed. Res. Int., 2013, 180137, 10.1155/2013/180137 Suzuki, 2011, Placement and removal torque values of orthodontic miniscrew implants, Am. J. Orthod. Dentofac. Orthop., 139, 669, 10.1016/j.ajodo.2010.11.017 Suzuki, 2016, Miniscrew-assisted rapid palatal expander (MARPE): the quest for pure orthopedic movement, Dent. Press J. Orthod., 21, 17, 10.1590/2177-6709.21.4.017-023.oin Suzuki, 2013, Evaluation of optimal length and insertion torque for miniscrews, Am. J. Orthod. Dentofac. Orthop., 144, 251, 10.1016/j.ajodo.2013.03.021 Suzuki, 1986, Stress analysis of short beams, AIAA J., 24, 1396, 10.2514/3.9455 Tepedino, 2017, Comparative evaluation of insertion torque and mechanical stability for self-tapping and self-drilling orthodontic miniscrews – an in vitro study, Head Face Med., 13, 10, 10.1186/s13005-017-0143-3 Tsui, 2012, Bone anchor systems for orthodontic application: a systematic review, Int J. Oral Maxillofac. Surg., 41, 1427, 10.1016/j.ijom.2012.05.011 Tuomi, 2017, In vitro cytotoxicity and surface topography evaluation of additive manufacturing titanium implant materials, J. Mater. Sci. Mater. Med., 28, 53, 10.1007/s10856-017-5863-1 Velasco-Ortega, 2010, In vitro evaluation of cytotoxicity and genotoxicity of a commercial titanium alloy for dental implantology, Mutat. Res., 702, 17, 10.1016/j.mrgentox.2010.06.013 Wiedel, 2016, A randomized controlled trial of self-perceived pain, discomfort, and impairment of jaw function in children undergoing orthodontic treatment with fixed or removable appliances, Angle Orthod., 86, 324, 10.2319/040215-219.1 Wilmes, 2011, Fracture resistance of orthodontic mini-implants: a biomechanical in vitro study, Eur. J. Orthod., 33, 396, 10.1093/ejo/cjq151 Wilmes, 2014, Mini-implant-supported temporary pontics, J. Clin. Orthod., 48, 422 Yamada, 2009, Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region, Angle Orthod., 79, 78, 10.2319/020408-68.1