Failure behavior of rubber O-ring under cyclic exposure to high-pressure hydrogen gas

Briscoe, 1994, Explosive decompression failure of rubber: a review of the origins of pneumatic stress induced rupture in elastomer, Rubber Chem Technol, 67, 384, 10.5254/1.3538683

Gent, 1969, Nucleation and growth of gas bubbles in elastomers, J Appl Phys, 40, 2520, 10.1063/1.1658026

Gent, 1958, Internal rupture of bonded rubber cylinders in tension, Proc Roy Soc, A 249, 195

Lindsey, 1967, Triaxial fracture studies, J Appl Phys, 38, 4843, 10.1063/1.1709232

Stevenson, 1995, Fracture of elastomers by gas decompression, Rubber Chem Technol, 68, 197, 10.5254/1.3538735

Stewart, 1970, Nucleation and growth of rubbers in elastomer, J Polym Sci Part A-2, 8, 937, 10.1002/pol.1970.160080609

Zakaria, 1990, Why rubber explodes, Chemtech, 20, 492

Ender, 1986, Elastomeric seals, Chemtech, 16, 52

Briscoe, 1992, Internal crack symmetry phenomena during gas-induced rupture of elastomers, Rubber Chem Technol, 65, 350, 10.5254/1.3538617

Embury, 2004, High-pressure gas testing of elastomer seals and a practical approach to designing for explosive decompression service, Sealing Technol, 6, 10.1016/S1350-4789(04)00231-4

Atkinson, 2002, Decompression modeling of elastomer seals promises to eliminate downtime, Sealing Technol, 8, 10.1016/S1350-4789(02)12021-6

Epstein, 1950, On the stability of gas bubbles in liquid-gas solutions, J Chem Phys, 18, 1505, 10.1063/1.1747520

Yamabe, 2009, Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas, Int J Hydrogen Energy, 34, 1977, 10.1016/j.ijhydene.2008.11.105

Yamabe, 2011, Influence of carbon black on crack damage and hydrogen permeation properties of filled EPDM rubbers exposed to high-pressure hydrogen gas, J Appl Polym Sci, 122, 3172, 10.1002/app.34344

JIS K 6251. Rubber, vulcanized or thermoplastic – determination of tensile stress–strain.

Treloar, 2005

Yamabe, 2011, Nanoscale fracture analysis by atomic force microscopy of EPDM rubber due to high-pressure hydrogen decompression, J Mater Sci, 46, 2300, 10.1007/s10853-010-5073-4

Yamabe, 2012, Hydrogen-induced degradation of rubber seals, 769

Van Amerongen, 1964, Diffusion in elastomers, Rubber Chem Technol, 37, 1067, 10.5254/1.3540396

Greensmith, 1955, Rupture of rubber. III. Determination of tear properties, J Polym Sci, 18, 189, 10.1002/pol.1955.120188803

Lake, 1964, Cut growth and fatigue of rubber. II. Experiments on a noncrystallizing rubber, J Appl Polym Sci, 8, 707, 10.1002/app.1964.070080212

Yamabe, 2011, Crack growth behavior of sealing rubber under static strain in high-pressure hydrogen gas, J Sol Mech Mater Eng, 5, 690, 10.1299/jmmp.5.690

Busfield, 2002, Contribution of time dependent and cyclic crack growth behavior of non strain-crystallizing elastomer, Rubber Chem Technol, 75, 643, 10.5254/1.3544991

Demarez, 1954, Diffusion of hydrogen in mild steel, Acta Metall, 2, 214, 10.1016/0001-6160(54)90162-5

Marckmann, 2006, Comparison of hyperelastic models for rubber-like materials, Rubber Chem Technol, 79, 835, 10.5254/1.3547969