Failure assessments of corroded pipelines with axial defects using stress-based criteria: Numerical studies and verification analyses

International Journal of Pressure Vessels and Piping - Tập 86 Số 2-3 - Trang 164-176 - 2009
Mario S. G. Chiodo1, Cláudio Ruggieri1
1Department of Naval Architecture and Ocean Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2231 (PNV-EPUSP), São Paulo, SP 05508-030, Brazil

Tóm tắt

Từ khóa


Tài liệu tham khảo

Eiber, 1986, Failure of pipelines, vol. 11, 695

American Society of Mechanical Engineers, 1991

Kiefner, 1989

Det Norsk Veritas. Corroded Pipelines, DNV-RP-F101; 2004.

Kiefner, 1973, Failure stress levels of flaws in pressurized cylinders, 461

Batte A D, Fu B, Kirkwood MG,Vu D. New methods for determining the remaining strength of corroded pipelines in offshore mechanics and arctic engineering conference (OMAE), vol. V; 1997. p. 221–8 [Pipeline Technology].

Leis BN, Stephens DR. An alternative approach to assess the integrity of corroded line pipe – Part I: current status In: International offshore and polar engineering conference (ISOPE), vol. IV; 1997. p. 624–34.

Wilkowski, 2000, ‘‘Progress in development of acceptance criteria for local thinned areas in pipe and piping components, Nuclear Engineering and Design, 195, 149, 10.1016/S0029-5493(99)00245-9

Maes MA, Salama MM, Dann M. Reliability of burst limit states for damaged and corroded high strength pipelines. In: twenty-fifth offshore mechanics and arctic engineering conference (OMAE); 2006.

Fu B, Kirkwood M.G. Determination of Failure pressure of corroded linepipes using the nonlinear finite element method. In: Proceedings of the second International pipeline technology conference, vol. II; 1995. p. 1–9.

Karstensen, 2001, Corrosion damage assessment and burst test validation of 8in X52 linepipe, Pressure Vessel Piping Design Analysis, 430, 189

Noronha D B, Benjamin AC, Andrade EQ. Finite element models for the prediction of the failure pressure of pipelines with long corrosion defects. In international pipeline conference (IPC). Calgary, Alberta, Canada; 2002.

Choi, 2003, Development of limit load solutions for corroded gas pipelines, International Journal of Pressure Vessels and Piping, 80, 121, 10.1016/S0308-0161(03)00005-X

Kim YP, Kim WS, Lee YK, Oh KH. The evaluation of failure pressure for corrosion defects within girth or seam weld in transmission pipelines. In: international pipeline conference (IPC). Calgary, Alberta, Canada; 2004.

Mannucci G, Demofonti G, Barsanti L, Harris D,Hillenbrand HG. Fracture properties of API X100 gas pipeline steels. In: Thirteenth Biennial EPRG-PRCI Joint technical meeting. New Orleans, Louisiana, USA; 2001.

Chakrabarty, 2006

Miller, 1988, Review of limit loads of structures containing defects, International Journal of Pressure Vessels and Piping, 32, 197, 10.1016/0308-0161(88)90073-7

British Standard Institution. Guide on methods for assessing the acceptability of flaws in metallic structures. BS7910; 1999.

SINTAP: Structural Integrity Assessment Procedure for European Industry. Final procedure; 1999.

American Petroleum Institute. Fitness-for-service. API RP-579-1/ASME FFS-1, 2007.

Carter. J. A library of limit loads for fracture.Two. Nuclear electric report TD/SID/REP/0191; 1991.

Staat, 2004, Plastic collapse analysis of longitudinally flawed pipes and vessels, Nuclear Engineering and Design, 234, 25, 10.1016/j.nucengdes.2004.08.002

Staat, 2005, Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels, International Journal of Pressure Vessels and Piping, 82, 217, 10.1016/j.ijpvp.2004.07.022

Staat, 2007, Limit analysis of flaws in pressurized pipes and cylindrical vessels. Part I: axial defects, Engineering Fracture Mechanics, 74, 431, 10.1016/j.engfracmech.2006.04.031

Cravero, 2005, Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens – Part I: plane-strain analyses, Engineering Fracture Mechanics, 72, 1344, 10.1016/j.engfracmech.2004.10.010

Silva, 2006, Correlation of fracture behavior in high pressure pipelines with axial flaws using constraint designed test specimens – Part II: 3-D effects on constraint, Engineering Fracture Mechanics, 73, 2123, 10.1016/j.engfracmech.2006.04.004

Zhu XK, Leis BN. Theoretical and numerical predictions of burst pressure of pipelines. In: ASME pressure vessels and piping division conference (PVP). Vancouver, BC, Canada; 2005.

Anderson, 2005

Folias ES. The stresses in a cylindrical shell containing an axial crack”, aerospace research laboratories. Report ARL, 1964. p. 64–174.

Folias, 1965, An axial crack in a pressurized cylindrical shell, International Journal of Fracture Mechanics, 1, 104, 10.1007/BF00184151

Koppenhoefer, 1994, WARP3D: dynamic nonlinear analysis of solids using a preconditioned conjugate gradient software architecture

Dotta, 2004, “Structural integrity assessments of high pressure pipelines with axial flaws using a micromechanics model, International Journal of Pressure Vessels and Piping, 81, 761, 10.1016/j.ijpvp.2004.04.004