Factors influencing the removal of fine non-cohesive sediment by vortex settling basin at small river abstraction works

Alquier, 1982, Improvement of swirl concentrator, Journal of the Environmental Engineering Division, ASCE, 108, 379, 10.1061/JEEGAV.0001285 2013 Basson, 2006, Considerations for the design of river abstraction works in South Africa, Vol. 2 Bhaskar, 2007, CFD simulation and experimental validation studies on hydrocyclone, Minerals Engineering, 20, 60, 10.1016/j.mineng.2006.04.012 Boysan, 1982 Brekke, 2003, Design of hydraulic machinery working in sand laden water, 155 Brink, 2006, Sediment control at river abstraction works in South Africa, Vol. 1 Chrysostomou, 1983 Chu, 2011, CFD–DEM simulation of the gas–solid flow in a cyclone separator, Chemical Engineering Science, 66, 834, 10.1016/j.ces.2010.11.026 Cullivan, 2004, New understanding of a hydrocyclone flow field and separation mechanism from computational fluid dynamics, Minerals Engineering, 17, 651, 10.1016/j.mineng.2004.04.009 Curi, 1979, Vortex type solid-liquid separator, Progress in Water Technology, 7, 183 Fenner, 1997, Scaling laws for hydrodynamic separators, Journal of Environmental Engineering, 123, 1019, 10.1061/(ASCE)0733-9372(1997)123:10(1019) Gimbun, 2005, A CFD study on the prediction of cyclone collection efficiency, International Journal for Computational Methods in Engineering Science and Mechanics, 6, 161, 10.1080/15502280590923649 Green, 2019 Hoekstra, 1999, An experimental and numerical study of turbulent swirling flow in gas cyclones, Chemical Engineering Science, 54, 2055, 10.1016/S0009-2509(98)00373-X Jan, 2016, Effect of cylinder heights of a deep-depth vortex chamber type sediment extractor on sediment removal efficiency: Experiments, Journal of Taiwan Agricultural Engineering, 62, 64 Luyckx, 2004, Removal efficiency of swirl/vortex separators, Urban Water Journal, 1, 251, 10.1080/15730620410001731991 Mashauri, 1986 Novak, 1984, Incipient motion of sediment particles over fixed beds, Journal of Hydraulic Research, 22, 181, 10.1080/00221688409499405 Paul, 1991, Vortex settling basin design considerations, Journal of Hydraulic Engineering, 117, 172, 10.1061/(ASCE)0733-9429(1991)117:2(172) Richardson, 2002, Coulson and Richardson's chemical engineering, Vol. 2 Rooseboom, 2002, The extraction of water from sediment-laden streams in Southern Africa Salakhov, 1975, Rotational design and methods of hydraulic calculation of load-controlling water intake structures for mountain rivers, 151 Slack, 2000, Advances in cyclone modelling using unstructured grids, Chemical Engineering Research and Design, 78, 1098, 10.1205/026387600528373 Sullivan, 1972 Sullivan, 1978 Sullivan, 1974 Svarovsky, 1984 Veerapen, 2005, Design methodology for the swirl separator, Aquacultural Engineering, 33, 21, 10.1016/j.aquaeng.2004.11.001 Weiß, 1997, Vortex separator: Proposal of a dimensioning method, Water Science and Technology, 36, 201, 10.2166/wst.1997.0666 Zhiyao, 2008, A simple formula for predicting settling velocity of sediment particles, Water Science and Engineering, 1, 37, 10.1016/S1674-2370(15)30017-X