Face stability analysis of shallow circular tunnels in cohesive–frictional soils

Anagnostou, 1996, Face stability condition with earth pressure balanced shields, Tunn. Undergr. Space Technol., 11, 165, 10.1016/0886-7798(96)00017-X

Anagnostou, 2011, Comments on ‘‘Face stability and required support pressure for TBM driven tunnels with ideal face membrane: drained case’’, Tunn. Undergr. Space Technol., 26, 497, 10.1016/j.tust.2010.09.007

Atkinson, 1977, Stability of a shallow circular tunnel in cohesionless soils, Géotechnique, 27, 203, 10.1680/geot.1977.27.2.203

Augarde, 2003, Stability of an undrained plane strain heading revisited, Comput. Geotech., 30, 419, 10.1016/S0266-352X(03)00009-0

Broere, W., 2001. Tunnel Face Stability and New CPT Applications. Ph.D. Thesis, Delft University of Technology. The Netherlands: Delft University Press.

Broms, 1967, Stability of clay at vertical openings, J. Soil Mech. Found. Eng., 193, 71, 10.1061/JSFEAQ.0000946

Chambon, 1994, Sallow tunnels in cohesionless soil: stability of tunnel face, J. Geotech. Eng., 120, 1148, 10.1061/(ASCE)0733-9410(1994)120:7(1148)

Chen, 2011, Face stability analysis of shallow shield tunnels in dry sandy ground using the discrete element method, Comput. Geotech., 38, 187, 10.1016/j.compgeo.2010.11.003

Chen, 2013, Experimental study on face instability of shield tunnel in sand, Tunn. Undergr. Space Technol., 33, 12, 10.1016/j.tust.2012.08.001

Chen, 1975

Davis, 1980, The stability of shallow tunnels and underground openings in cohesive material, Geotechnique, 30, 397, 10.1680/geot.1980.30.4.397

Ellstein, 1986, Heading failure of lined tunnels in soft soils, Tunnels Tunn., 18, 51

Funatsu, 2008, Numerical analysis to better understand the mechanism of the effects of ground supports and reinforcement on the stability of tunnels using the distinct element method, Tunn. Undergr. Space Technol., 23, 561, 10.1016/j.tust.2007.10.003

Horn, N., 1961. Horizontal earth pressure on the vertical surfaces of the tunnel tubes. In: National Conference of the Hungarian Civil Engineering Industry, Budapest, November, pp. 7–16 (in German).

Ibrahim, 2015, Three-dimensional face stability analysis of pressurized tunnels driven in a multilayered purely frictional medium, Tunn. Undergr. Space Technol., 49, 18, 10.1016/j.tust.2015.04.001

Idinger, 2011, Centrifuge model test on the face stability of shallow tunnel, Acta Geotech., 6, 105, 10.1007/s11440-011-0139-2

Itasca Consulting Group Inc, 2006. FLAC3D Manual, third ed. (FLAC3D Version 3.1).

Janelid, 1966, Sublevel caving, Int. J. Rock Mech. Min. Sci., 3, 129, 10.1016/0148-9062(66)90004-0

Kimura, T., Mair, R.J., 1981. Centrifugal testing of model tunnels in soft soil. In: Proc. 10th Int. Conf. Soil Mech. Found. Eng, vol. 1. Blakema, pp. 319–322.

Kirsch, 2010, Experimental investigation of the face stability of shallow tunnels in sand, Acta Geotech., 5, 43, 10.1007/s11440-010-0110-7

Klar, 2007, 2D and 3D upper bound solutions for tunnel excavation using ‘elastic’ flow fields, Int. J. Numer. Anal. Methods Geomech., 31, 1367, 10.1002/nag.597

Krause, T., 1987. Schildvortrieb mit flüssigkeits-und erdgestützter ortsbrust. PhD Thesis, Technical University Carolo-Wilhelmina, Brunswick.

Leca, 1990, Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material, Géotechnique, 40, 581, 10.1680/geot.1990.40.4.581

Li, 1996

Lu, 2014, Upper bound solution for the face stability of shield tunnel below the water table, Math. Probl. Eng.

Lyamin, A.V., Sloan, S.W., 2000. Stability of a plane strain circular tunnel in a cohesive frictional soil. In: Proc. J.R. Booker Memorial Sym., Sydney, pp. 139–153.

Mollon, 2013, Continuous velocity fields for collapse and blowout of a pressurized tunnel face in purely cohesive soil, Int. J. Numer. Anal. Methods Geomech., 37, 2061, 10.1002/nag.2121

Mollon, 2009, Probabilistic analysis and design of circular tunnels against face stability, Int. J. Geomech., 9, 237, 10.1061/(ASCE)1532-3641(2009)9:6(237)

Mollon, 2011, Rotational failure mechanisms for the face stability analysis of tunnels driven by pressurized shields, Int. J. Numer. Anal. Methods Geomech., 35, 1363, 10.1002/nag.962

Murayama, S., Endo, M., Hashiba, T., Yamamoto, K., Sasaki, H. (Eds.), 1966. Geotechnical aspects for the excavating performance of the shield machines. In: The 21st Annual Lecture in Meeting of Japan Society of Civil Engineers.

Sagaseta, 1987, Analysis of undrained soil deformation due to ground loss, Geotechnique, 37, 301, 10.1680/geot.1987.37.3.301

Senent, 2013, Stability of tunnel face in rock masses with the Hoek-Brown failure criterion, Int. J. Rock Mech. Min. Sci., 60, 440, 10.1016/j.ijrmms.2013.01.004

Senent, 2015, A tunnel face failure mechanism for layered ground, considering the possibility of partial collapse, Tunn. Undergr. Space Technol., 47, 182, 10.1016/j.tust.2014.12.014

Soubra, A.H., 2002. Kinematical approach to the face stability analysis of shallow circular tunnels. In: Proc. 8th Int. Sym. Plasticity., Canada, British Columbia, pp. 443–445.

Soubra, A.H., 2000. Three-dimensional face stability analysis of shallow circular tunnels. In: Proc. Int. Conf. Geotech. Geo. Eng., Australia, Melbourne.

Subrin, 2002, Tunnel face stability in frictional material: a new 3D failure mechanism, C.R. Mecanique, 330, 513, 10.1016/S1631-0721(02)01491-2

Takano, D., Otani, J., Nagatani, H., Mukunoki, T., 2006. Application of X-ray CT on boundary value problems in geotechnical engineering-research on tunnel face failure. In: Proc. Geo. ASCE, Atlanta.

Vermeer, 2002, Tunnel heading stability in drained ground, Felsbau, 20, 8

Verruijt, 1996, Surface settlements due to deformation of a tunnel in an elastic half plane, Geotechnique, 46, 753, 10.1680/geot.1996.46.4.753

Zhang, 2011, A discrete numerical approach for modeling face stability in slurry shield tunnelling in soft soils, Comput. Geotech., 38, 94, 10.1016/j.compgeo.2010.10.011