Face-centred cubic CuO nanocrystals for enhanced pool-boiling critical heat flux and higher thermal conductivities

Shojaeian, 2015, Pool boiling and flow boiling on micro-and nanostructured surfaces, Exp. Therm. Fluid Sci., 63, 45, 10.1016/j.expthermflusci.2014.12.016 Demir, 2014, Effect of silicon nanorod length on horizontal nanostructured plates in pool boiling heat transfer with water, Int. J. Therm. Sci., 82, 111, 10.1016/j.ijthermalsci.2014.03.015 Lu, 2011, Nanoscale surface modification techniques for pool boiling enhancement-a critical review and future directions, Heat Transf. Eng., 32, 827, 10.1080/01457632.2011.548267 Sesen, 2010, Compact nanostructure integrated pool boiler for microscale cooling applications, Micro Nano Lett, 5, 203, 10.1049/mnl.2010.0070 Liu, 2006, Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method, Int. J. Heat Mass Transfer, 49, 3028, 10.1016/j.ijheatmasstransfer.2006.02.012 Liu, 2011, Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system, Nanoscale Res. Lett., 6, 1, 10.1186/1556-276X-6-297 Cheedrala, 2015, Highly wettable CuO: graphene oxide core-shell porous nanocomposites for enhanced critical heat flux, Phy. Status Solidi, 212, 1756, 10.1002/pssa.201431858 Huo, 2014, CuO nanoparticles encapsulated inside Al-MCM-41 mesoporous materials via direct synthetic route, Sci. Rep., 4, 3682, 10.1038/srep03682 Kandikar, 2004, Heat transfer mechanisms during flow boiling in microchannels, J. Heat Transfer, 126, 8, 10.1115/1.1643090 Choi, 2008, Nanofluids: a new field of scientific research and innovative applications, Heat Transfer Eng, 29, 429, 10.1080/01457630701850778 Yu, 2008, Review and comparison of nanofluid thermal conductivity and heat transfer enhancements, Heat Transfer Eng, 29, 432, 10.1080/01457630701850851 Kakac, 2009, Review of convective heat transfer enhancement with nanofluids, Int. J. Heat Mass Transfer, 52, 3187, 10.1016/j.ijheatmasstransfer.2009.02.006 Silva, 2014, The effect of coolants on the performance of magnetic micro-refrigerators, J. Nanosci. Nanotechnol., 14, 4337, 10.1166/jnn.2014.8205 Karimzadehkhouei, 2017, The effect of nanoparticle type and nanoparticle mass fraction on heat transfer enhancement in pool boiling, Int. J. Heat Mass Transfer, 109, 157, 10.1016/j.ijheatmasstransfer.2017.01.116 Gilbertson, 2016, Shape-dependent surface reactivity and antimicrobial activity of nano-cupric oxide, Environ. Sci. Technol., 50, 3975, 10.1021/acs.est.5b05734 Anandan, 2005, Room temperature growth of CuO nanorod arrays on copper and their application as a cathode in dye-sensitized solar cells, Mater. Chem. and Phy., 93, 35, 10.1016/j.matchemphys.2005.02.002 Choi, 1995, Enhancing thermal conductivity of fluids with nanoparticles Lee, 2014, Analysis of oxide (Al2O3, CuO, and ZnO) and Cnt nanoparticles disaggregation effect on the thermal conductivity and the viscosity of nanofluids, Int. J. Precis. Eng. Manuf., 15, 703, 10.1007/s12541-014-0390-1 Lee, 1999, Measuring thermal conductivity of fluids containing oxide nanoparticles, J. Heat Transfer, 121, 280, 10.1115/1.2825978 Vassallo, 2004, Poor boiling heat transfer experiments in silica-water nanofluids, Int. J. Heat Mass Transfer, 47, 407, 10.1016/S0017-9310(03)00361-2 Bang, 2005, Boiling heat transfer performance and phenomena of Al2O3-water nano-fluids from a plain surface in a pool, Int. J. Heat Mass Transfer, 48, 2407, 10.1016/j.ijheatmasstransfer.2004.12.047 S.J. Kim, I.C. Bang, J. Buongiorno, L.W. Hu, Effects of nanoparticle deposition on surface wettability influencing boiling heat transfer in nanofluids, Appl. Phys. Lett.89(2006), 153107-01-153107-03. Cheedarala, 2016, Experimental study on critical heat flux of highly efficient soft hydrophilic CuO-chitosan nanofluid templates, Int. J. of Heat and Mass Transfer, 100, 396, 10.1016/j.ijheatmasstransfer.2016.04.096 Karimzadehkhouei, 2017, The effect of nanoparticle type and nanoparticle mass fraction on heat transfer enhancement in pool boiling, Int. J. of Heat and Mass Transfer, 109, 157, 10.1016/j.ijheatmasstransfer.2017.01.116 Nguyen, 2018, Critical heat flux enhancement in pool boiling through increased rewetting on nano-pillar array surfaces, Sci. Rep., 8, 4815, 10.1038/s41598-018-22693-z Chabanenko, 2019, Magnetic moment inversion at gain flux jump: dynamical property of critical state in type-II superconductors, Sci. Rep., 9, 6233, 10.1038/s41598-019-42699-5 Sun, 2019, Global meridional eddy heat transport inferred from Argo and altimetry observations, Sci. Rep., 9, 1345, 10.1038/s41598-018-38069-2 Son, 2019, Role of receding capillary flow correlating nano/micro scale surface roughness and wettability with pool boiling critical heat flux, Int. J. Heat Mass Transfer, 138, 985, 10.1016/j.ijheatmasstransfer.2019.04.091 Utaka, 2019, Critical heat flux enhancement in narrow gaps via different-mode-interacting boiling with non-uniform thermal conductance inside heat transfer plate, Int. J. Heat Mass Transfer, 133, 702, 10.1016/j.ijheatmasstransfer.2018.12.123 Nahian, 2017, A study of sustainable green current generated by the fluid-based triboelectric nanogenerator (FluTENG) with a comparison of contact and sliding mode, Nano Energy, 38, 447, 10.1016/j.nanoen.2017.06.012 Cheedarala, 2018, Double characteristic BNO-SPI-TENGs for robust contact electrification by vertical contact separation mode through ion and electron charge transfer, Nano Energy, 44, 430, 10.1016/j.nanoen.2017.12.019 Cheedarala, 2019, Harvesting liquid stream energy from unsteady peristaltic flow induced pulsatile Flow-TENG (PF-TENG) using slipping polymeric surface inside elastomeric tubing, Nano Energy, 65, 10.1016/j.nanoen.2019.104017 Cheedarala, 2014, Bio‐inspired all‐organic soft actuator based on a π–π stacked 3D ionic network membrane and ultra‐fast solution processing, Adv. Funct. Mater., 24, 6005, 10.1002/adfm.201401136 Jeon, 2013, Dry‐type artificial muscles based on pendent sulfonated chitosan and functionalized graphene oxide for greatly enhanced ionic interactions and mechanical stiffness, Adv. Funct. Mater., 23, 6007, 10.1002/adfm.201203550 Cheedarala, 2011, Ladder-type heteroacene polymers bearing carbazole and thiophene ring units and their use in field-effect transistors and photovoltaic cells, J. Mater. Chem., 21, 843, 10.1039/C0JM01897J Won, 2012, Cu2O and Au/Cu2O Particles: surface Properties and Applications Glucose Sensing, Sensors, 12, 13019, 10.3390/s121013019 Guo, 2015, Urchin-like Pd@CuO-Pd yolk-shell nanostructures: synthesis, characterization and electrocatalysis, J. Mater. Chem. A, 3, 13653, 10.1039/C5TA01891A Ho, 2017, Photocatalytic and adsorption performances of faceted cuprous oxide (Cu2O) particles for the removal of methyl orange (MO) from aqueous media, Molecules, 22, 677, 10.3390/molecules22040677 Wang, 2002, Preparation of CuO nanoparticles by microwave irradiation, J. Crystal Growth, 244, 88, 10.1016/S0022-0248(02)01571-3 Zhu, 2004, Highly dispersed Cuo nanoparticles prepared by a novel quick-precipitation method, Mater Lett, 58, 3324, 10.1016/j.matlet.2004.06.031 R. Karthik, R. Harish Nagarajan, B. Raja, P. Damodharan, Thermal conductivity of CuO–DI water nanofluids using 3-ω measurement technique in a suspended micro-wire, 40(2012), 1–9. Khedkar, 2012, Influence of CuO nanoparticles in enhancing the thermal con monoethlene glycol based nanofluids, Int. Commun. Heat Mass Transfer, 39, 665, 10.1016/j.icheatmasstransfer.2012.03.012 Kumar, 2016, Experimental study of thermal conductivity and convective heat transfer enhancement using CuO and TiO2 nanoparticles, Int. Commun. Heat Mass Transfer, 76, 98, 10.1016/j.icheatmasstransfer.2016.04.028 Kumar, 2018, Experimental study on pool boiling and critical heat flux enhancement of metal oxides based nanofluid, Mass Tansfer, 96, 37 Zhang, 2009, Study on the thermal conductivity characteristics for ultra-thin body FD SOI MOSFETs based on phonon scattering mechanisms, Materials, 12 M. Liu, M.C. Lin, C. Wang, Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system, Nanoscale Res. Lett., 6(2011) 297. Zhu, 2018, Intriguingly high thermal conductivity increment for CuO nanowires contained nanofluids with low viscosity, Sci. Rep., 8, 5282, 10.1038/s41598-018-23174-z Kandlikar, 1995, A control volume approach for investigating forces on a departing bubble under subcooled flow boiling, J. Heat Transfer, 117, 990, 10.1115/1.2836321 Kandlikar, 2001, A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation, J. Heat Transfer, 123, 1071, 10.1115/1.1409265 Zuber, 1959 Rioux, 2014, A systematic study of pool boiling heat transfer on structured porous surfaces: from nanoscale through microscale to macroscale, AIP Adv., 4, 10.1063/1.4902343 Liter, 1998, CHF enhancement by modulated porous-layer coating, ASME heat transfer DIV PUBL HTD, 361, 165 Cho, 2019, Bubble nucleation, growth, and departure: a new, dynamic understanding, Int. J. of Heat and Mass Transfer, 145, 10.1016/j.ijheatmasstransfer.2019.118803 Chusuei, 1999, Correlation of relative X-ray photoelectron spectroscopy shake-up intensity with CuO particle size, Langmuir, 15, 2806, 10.1021/la9815446 Jones, 2009, The influence of surface roughness on nucleate pool boiling heat transfer, J Heat Transfer, 131, 121009, 10.1115/1.3220144 Huo, 2014, CuO nanoparticles encapsulated inside Al-MCM-41 mesoporous materials via direct synthetic route, Sci. Rep., 4, 3682, 10.1038/srep03682 Kandlikar, 2004, Heat transfer mechanisms during flow boiling in micro-channels, J. Heat Transfer, 126, 8, 10.1115/1.1643090 Bakru, 1972, Boiling from Small Cylinders, Int. J. Heat and Mass Transfer, 15, 2011, 10.1016/0017-9310(72)90028-2 Hetsroni, 2002, A uniform temperature heat sink for cooling of electronic devices, Int. J. Heat and Mass Transfer, 45, 3275, 10.1016/S0017-9310(02)00048-0 You, 2003, Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer, Appl. Phys. Lett., 83, 3374, 10.1063/1.1619206 Luo, 2012, Angle inequality for judging the transition from cassie-baxter to wenzel states when a water drop contacts bottoms of grooves between micro pillars, Langmuir, 28, 13636, 10.1021/la3026914 Kandlikar, 2002, Contact angles and interface behavior during rapid evaporation of liquid on a heated, Int. J. Heat Mass Transfer, 45, 3771, 10.1016/S0017-9310(02)00090-X Wang, 2004, Bubble-top Jet Flow on Microwires, Int. J. Heat Mass Transfer, 47, 2891, 10.1016/j.ijheatmasstransfer.2004.03.023 ole, 1967, Bubble frequencies and departure volumes at subatmospheric pressures, AlChE J, 13, 79 S.Kutateladze, 1980, Growth rate and detachment diameter of a vapor bubble in free convection boiling of a saturated liquid, High Temp, 17, 667 Phan, 2009, How does surface wettability influence nucleate boiling?, C R Mecanique, 337, 251, 10.1016/j.crme.2009.06.032 Xiang, 2013, Existence and role of large micro-pillars on the leaf surfaces of the president lotus, Langmuir, 29, 7715, 10.1021/la401193c Singh, 2013, Wetting dynamics and evaporation of sessile droplets on nano-porous alumina surfaces, Colloid. Surfac. A, 432, 71, 10.1016/j.colsurfa.2013.04.070 Arik, 2007, Enhancement of pool boiling critical heat flux in dielectric liquids by micro porous coatings, Int. J. Heat Mass Transf., 50, 997, 10.1016/j.ijheatmasstransfer.2006.08.005 Hu, 2017, Boiling and quenching heat transfer advancement by nanoscale surface modification, Sci. Rep., 7, 6117, 10.1038/s41598-017-06050-0 Brautsch, 2002, Examination and visualisation of heat transfer processes during evaporation in capillary porous structures, Appl. Therm. Eng., 22, 815, 10.1016/S1359-4311(02)00027-3 Weibel, 2010, Characterization of evaporation and boiling from sintered powder wicks fed by capillary action, Int. J. Heat Mass Transf., 53, 4204, 10.1016/j.ijheatmasstransfer.2010.05.043 Mughal, 1996, An experimental study of boiling on a wicked surface, Int. J. Heat Mass Transf., 39, 771, 10.1016/0017-9310(95)00159-X Williams, 2006, A device and technique to measure the heat transfer limit of a planar heat pipe wick, Experimental Thermal and Fluid Science, 30, 277, 10.1016/j.expthermflusci.2005.07.008