Fabrication of superconducting Nb3Sn film by Co-sputtering

Padamsee, 2008 Pudasaini, 2018, Initial growth of tin on niobium for vapor diffusion coating of Nb3Sn, Supercond. Sci. Technol. Posen, 2021, Advances in Nb3Sn superconducting radiofrequency cavities towards first practical accelerator applications, Supercond. Sci. Technol., 34, 10.1088/1361-6668/abc7f7 Posen, 2017, Nb3Sn superconducting radiofrequency cavities: fabrication, results, properties, and prospects, Supercond. Sci. Technol., 30, 10.1088/1361-6668/30/3/033004 Kolosov, 2005, Criteria for selecting substrates for Nb3Sn electrodeposition, Inorg. Mater., 41, 961, 10.1007/s10789-005-0246-2 Trenikhina, 2017, Performance-defining properties of Nb3Sn coating in SRF cavities, Supercond. Sci. Technol., 31, 10.1088/1361-6668/aa9694 Sayeed, 2021, Microstructural and superconducting radiofrequency properties of multilayer sequentially sputtered Nb3Sn films, vol. 31, 1 Sayeed, 2021, Properties of Nb3Sn films fabricated by magnetron sputtering from a single target, Appl. Surf. Sci., 541, 10.1016/j.apsusc.2020.148528 Sayeed, 2019, Structural and superconducting properties of Nb3Sn films grown by multilayer sequential magnetron sputtering, J. Alloys Compd., 800, 272, 10.1016/j.jallcom.2019.06.017 Sayeed, M.N., Pudasaini, U., Reece, C.E., Eremeev, G.V. and Elsayed-Ali, H.E., “Effect of substrate temperature on the growth of Nb3Sn film on Nb by multilayer sputtering”. Thin Solid Films, 763, p.139569.https://doi.org/10.1016/j.jallcom.2019.06.017. Lee, 2020, Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications, Acta Mater., 188, 155, 10.1016/j.actamat.2020.01.055 Godeke, 2006, A review of the properties of Nb3Sn and their variation with A15 composition, morphology and strain state, Supercond. Sci. Technol., 19, R68, 10.1088/0953-2048/19/8/R02 Porter, 2021 Checchin, 2020, Vortex dynamics and dissipation under high-amplitude microwave drive, Phys. Rev. Appl., 14, 10.1103/PhysRevApplied.14.044018 Gurevich, 2017, Theory of RF superconductivity for resonant cavities, Supercond. Sci. Technol., 30, 10.1088/1361-6668/30/3/034004 Becker, 2015, Analysis of Nb3Sn surface layers for superconducting radio frequency cavity applications, Appl. Phys. Lett., 106, 10.1063/1.4913617 Eremeev, 2019, RF performance sensitivity to tuning of Nb3Sn coated CEBAF cavities, 55 Porter, 2018, Next generation Nb3Sn SRF cavities for linear accelerators, 462 Dhuley, 2020, Demonstration of CW accelerating gradients on a cryogen-free, cryocooler conduction-cooled SRF cavity, vol. 755 Dong, 2022, Preliminary Research of niobium cavity coating with Nb3Sn film at IHEP, Phys. C: Supercond. Appl., 600, 10.1016/j.physc.2022.1354107 Zhu, 2022, Study on preparation of Nb3Sn films by bronze route, Phys. C: Supercond. Appl., 601, 10.1016/j.physc.2022.1354113 Wu, 1977, High‐rate magnetron sputtering of high Tc Nb3Sn films, J. Vac. Sci. Technol., 14, 134, 10.1116/1.569104 Kampwirth, 1977, Application of high rate magnetron sputtering to the fabrication of A-15 compounds, IEEE Trans. Magn., 13, 315, 10.1109/TMAG.1977.1059445 Agatsuma, 1996, Nb3Sn thin films made by RF magnetron sputtering process with a reacted Nb3Sn powder target, IEEE Trans. Magn., 32, 2925, 10.1109/20.511488 Ilyina, 2019, Development of sputtered Nb3Sn films on copper substrates for superconducting radiofrequency applications, Supercond. Sci. Technol., 32, 10.1088/1361-6668/aaf61f Valizadeh, 2019, PVD Depostion of Nb3Sn thin film on copper substrate from an alloy Nb3Sn target, Proc. IPAC, 19, 2818 Schäfer, 2020, Kinetically induced low-temperature synthesis of Nb3Sn thin films, J. Appl. Phys., 128, 10.1063/5.0015376 Xiao, 2021, Annealing study on the properties of Cu-based Nb3Sn films under argon pressures for SRF applications, Phys. C: Supercond. Appl., 586, 10.1016/j.physc.2021.1353894 Vandenberg, 1985, New phase formation and superconductivity in reactively diffused Nb3Sn multilayer films, vol. 21, 819 Deambrosis, 2007, The progress on Nb3Sn and V3Si, 393 Rossi, 2009, Nb3Sn films by multilayer sputtering, 149 Ito, 2019, Nb3Sn thin film coating method for superconducting multilayered structure, vol. 19 Tan, 2020, The observation of tin islands in Nb3Sn thin films deposited by magnetron sputtering, Phys. C: Supercond. Appl., 576, 10.1016/j.physc.2020.1353667 Schäfer, 2020, Kinetically induced low-temperature synthesis of Nb3Sn thin films, J. Appl. Phys., 128, 10.1063/5.0015376 Sundahl, 2021, Alex Gurevich, and Chang-Beom Eom. "Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators, Sci. Rep., 11, 1, 10.1038/s41598-021-87119-9 Arnaud le Febvrier, 2021, Per Sandström, Per Eklund, an upgraded ultra-high vacuum magnetron-sputtering system for high-versatility and software-controlled deposition, Vacuum, 187 Ciovati, 2011, Buffered electrochemical polishing of niobium, J. Appl. Electrochem., 41, 721, 10.1007/s10800-011-0286-z Yu, 2022, The oxidation behaviors of high-purity niobium for superconducting radio-frequency cavity application in vacuum heat treatment, Vacuum, 203, 10.1016/j.vacuum.2022.111258 Spradlin, 2015, A multi-sample residual resistivity ratio system for high quality superconductor measurements Li, 2016, Structural and nanomechanical characterization of niobium films deposited by DC magnetron sputtering, Appl. Phys. A, 122, 1, 10.1007/s00339-016-9990-1 Shimizu, 2018, Room-temperature growth of thin films of niobium on strontium titanate (0 0 1) single-crystal substrates for superconducting joints, Appl. Surf. Sci., 444, 71, 10.1016/j.apsusc.2018.03.022