Fabrication of praseodymium-doped ceria (PDC) films by slurry spin-coating technique and its structural, morphological and optical properties
Tài liệu tham khảo
Kaittanis, 2012, A cerium oxide nanoparticle-based device for the detection of chronic inflammation via optical and magnetic resonance imaging, Nanoscale, 4, 2117, 10.1039/c2nr11956k
Izu, 2004, Resistive oxygen sensors using cerium oxide thin films prepared by metal-organic chemical vapor deposition and sputtering, Jpn. J. Appl. Phys., Part 1, 43, 6920, 10.1143/JJAP.43.6920
Vickers, 2015, Mesoporous Mn- and La-doped cerium oxide/cobalt oxide mixed metal catalysts for methane oxidation, ACS Appl. Mater. Interfaces, 7, 11460, 10.1021/acsami.5b02367
Cheng, 2009, Characteristics of cerium oxide for metal-insulator-metal capacitors, Electrochem. Solid-State Lett., 13, 2010
Rao, 2022, Synthesis of praseodymium-doped ceria-based electrolyte material by hydrothermal method, Green Energy Technol., 433, 10.1007/978-981-16-8278-0_28
Anantharaman, 2017, Soot oxidation activity of redox and non-redox metal oxides synthesised by EDTA–citrate method, Catal. Lett., 147, 3004, 10.1007/s10562-017-2181-7
Shajahan, 2020, Dilatometer studies of praseodymium doped ceria: effect of synthesis methods on sintering behaviour, Mater. Chem. Phys., 240, 10.1016/j.matchemphys.2019.122211
Rossignol, 2001, Synthesis, structure and catalytic properties of Zr-Ce-Pr-O mixed oxides, J. Mater. Chem., 11, 2587, 10.1039/b102763h
Andana, 2016, Nanostructured ceria-praseodymia catalysts for diesel soot combustion, Appl. Catal. B Environ., 197, 125, 10.1016/j.apcatb.2015.12.030
Öztürk, 2015, Investigation of phase formation dependency of photoluminescence properties of Eu3+ in Mg4Al2O7:eu3+,Dy3+ and Ca4Al2O7:Eu3+,Dy3+ red-emitting phosphors, J. Therm. Anal. Calorim., 120, 1139, 10.1007/s10973-015-4439-x
Basavaraj, 2020, Novel orange-red emitting Pr3+ doped CeO2 nanopowders for white light-emitting diode applications, Inorg. Chem. Commun., 120, 10.1016/j.inoche.2020.108164
Smeacetto, 2010, Yttria-stabilized zirconia thin film electrolyte produced by RF sputtering for solid oxide fuel cell applications, Mater. Lett., 64, 2450, 10.1016/j.matlet.2010.08.016
Ogumi, 1992, Preparation of thin yttria-stabilized zirconia films by vapor-phase electrolytic deposition, Solid State Ion, 58, 345, 10.1016/0167-2738(92)90139-G
Setoguchi, 1990, Application of the stabilized zirconia thin film prepared by spray pyrolysis method to SOFC, Solid State Ion, 40–41, 502, 10.1016/0167-2738(90)90390-D
Lang, 2001, Development and characterization of vacuum plasma sprayed thin film solid oxide fuel cells, J. Therm. Spray Technol., 10, 618, 10.1361/105996301770349141
Kim, 2002, Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method, J. Power Sources, 110, 222, 10.1016/S0378-7753(02)00270-7
Hui, 2007, Fabrication of ceramic films for solid oxide fuel cells via slurry spin coating technique, J. Power Sources, 172, 840, 10.1016/j.jpowsour.2007.05.036
Anwar, 2011, Structural and optical study of samarium doped cerium oxide thin films prepared by electron beam evaporation, J. Alloys Compd., 509, 4525, 10.1016/j.jallcom.2011.01.067
Zarkov, 2017, Chemical solution deposition of pure and Gd-doped ceria thin films: structural, morphological and optical properties, Ceram. Int., 43, 4280, 10.1016/j.ceramint.2016.12.070
Bharathi, 2018, Structural, optical and magnetic properties of Pr doped CeO2 nanoparticles synthesized by citrate–nitrate auto combustion method, J. Mater. Sci., 29, 6679
Govardhan, 2022, Effect of Ag loading on praseodymium doped ceria catalyst for soot oxidation activity, Korean J. Chem. Eng., 39, 328, 10.1007/s11814-021-0933-y
Reddy, 2016, Co-evaporated SnS thin films for visible light photodetector applications, RSC Adv., 6, 95680, 10.1039/C6RA20129F
Mulpur, 2014, Surface plasmon coupled emission studies on engineered thin film hybrids of nano α-Al 2 O 3 on silver, AIP Conf. Proc., 1576, 22, 10.1063/1.4861970
Chung, 1998, Preparation of indium oxide thin film by spin-coating method and its gas-sensing properties, Sens. Actuators B Chem., 46, 139, 10.1016/S0925-4005(98)00100-2
Gyakwaa, 2020, Application of Raman spectroscopy for characterizing synthetic non-metallic inclusions consisting of calcium sulphide and oxides, Appl. Sci., 10, 10.3390/app10062113
Pawar, 2017, Physical, structural and topographical aspects of Zn1−xCoxSe thin films, Mater. Sci. Semicond. Process., 61, 71, 10.1016/j.mssp.2016.12.042
Yushkov, 2020, Deposition of boron-containing coatings by electron-beam evaporation of boron-containing targets, Ceram. Int., 46, 4519, 10.1016/j.ceramint.2019.10.179
Prasad, 2012, Nanocrystalline powders synthesized by the glycine-nitrate process, J. Phys. Chem. C, 116, 3467, 10.1021/jp207107j
Vinothkumar, 2019, Ionic Radii and Concentration Dependency of RE3+ (Eu3+, Nd3+, Pr3+, and La3+)-Doped Cerium Oxide Nanoparticles for Enhanced Multienzyme-Mimetic and Hydroxyl Radical Scavenging Activity, J. Phys. Chem. C, 123, 541, 10.1021/acs.jpcc.8b10108
Kırkgeçit, 2022, Optical and electrical conductivity properties of rare earth elements (Sm, Y, La, Er) co-doped CeO2, J. Rare Earths., 40, 1619, 10.1016/j.jre.2021.10.001
Gnanam, 2011, Synthesis of CeO2 or α-Mn2O3 nanoparticles via sol-gel process and their optical properties, J. Sol-Gel Sci. Technol., 58, 62, 10.1007/s10971-010-2356-9
Huang, 2011, Morphology-controllable synthesis and characterization of CeO2 nanocrystals, Particuology, 9, 170, 10.1016/j.partic.2010.07.023
Meng, 2013, Controllable synthesis and optical properties of nano-CeO2 via a facile hydrothermal route, J. Alloys Compd., 556, 102, 10.1016/j.jallcom.2012.12.096
Wang, 2010, Synthesis, characterization and photoluminescence of CeO2 nanoparticles by a facile method at room temperature, J. Alloys Compd., 493, 202, 10.1016/j.jallcom.2009.12.053
Kalpana Devi, 2020, Superionic conductive La3+ and Pr3+ Co-doped cerium oxide for IT-SOFC applications, J. Mater. Sci., 31, 10628
Boukhari, 2021, Thickness effect on the properties of 4% Mn-doped ZnO thin films grown by sol-gel spin coating deposition, Macromol. Symp., 397, 1, 10.1002/masy.202000235