Fabrication of micromechanical devices from polysilicon films with smooth surfaces

Fan, 1987, Pin joints gears, spring cranks, and other novel micromechanical structures, Proc. 4th Int. Conf. Solid-State Sensors and Actuators (Transducers '87), Tokyo, 849 Mehregany, 1988, Integrated fabrication of polysilicon mechanisms, IEEE Trans. Electron Devices, ED-35, 719, 10.1109/16.2522 Kern, 1979, Low-pressure chemical vapor deposition for very large-scale integration processing—a review, IEEE Trans. Electron Devices, ED-26, 647, 10.1109/T-ED.1979.19473 Guckel, 1987, Fine grained polysilicon and its applications to planar pressure transducers, Proc. 4th Int. Conf. Solid-State Sensors and Actuators (Transducers '87), Tokyo, Japan, 277 Guckel, 1988, Processing large aspect ratio microstructures, Tech. Digest, Solid-State Sensor and Actuator Workshop, Hilton Head Island,SC, U.S.A., 51, 10.1109/SOLSEN.1988.26431 Guckel, 1988, Fine grained polysilicon films with built-in tensile strains, IEEE Trans. Electron Devices, ED-35, 800, 10.1109/16.2534 Lasky, 1985, Silicon-on-insulator (SQI) by bonding and etchback, Int. Electron. Dev. Meet. (IEDM), Washington, DC, U.S.A., 684 Shimbo, 1986, Silicon-to-silicon direct bonding method, J. Appl. Phys., 60, 2987, 10.1063/1.337750 Maszara, 1988, Wafer bonding for SQI, Mater. Res. Soc. Symp. Proc., 107, 489, 10.1557/PROC-107-489 Black, 1988, Silicon and silicon dioxide thermal bonding, Mater. Res. Soc. Symp. Proc., 107, 495, 10.1557/PROC-107-495 Gould, 1988, J. Electrochem. Soc., Solid-State Sci. Technol., 135, 1535, 10.1149/1.2096048 Sandor, 1978, 410 Guckel, 1988, Mechanical properties of fine grained polysilicon—the repeatability issue, Tech. Digest, Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, U.S.A., 96, 10.1109/SOLSEN.1988.26442