Fabrication of SLM NiTi Shape Memory Alloy via Repetitive Laser Scanning

Meier H, Haberland C, Frenzel J (2012) Structural and functional properties of NiTi shape memory alloys produced by selective laser melting. In: Bártolo (ed) Innovative developments in virtual and physical prototyping. Ruhr University Bochum, Bochum, pp 291–296

Elahinia MH, Hashemi M, Tabesh M, Bhaduri SB (2012) Manufacturing and processing of NiTi implants: a review. Prog Mater Sci 57:911–946

Dadbakhsh S, Speirs M, Kruth J-P, Schrooten J, Luyten J, Van Humbeeck J (2014) Effect of SLM parameters on transformation temperatures of shape memory nickel titanium parts. Adv Eng Mater 16:1140–1146

Kumar PK, Lagoudas DC (2008) Introduction to shape memory alloys. In: Lagoudas DC (ed) Shape memory alloys: modeling and engineering applications. Springer, Berlin, pp 1–51

Meier H, Haberland C, Frenzel J, Zarnetta R (2009) Selective laser melting of NiTi shape memory components. Presented at the advanced research in virtual and rapid prototyping, Leiria, Portugal

Hartl DJ, Lagoundas DC (2008) Thermomechanical characterization of shape memory alloy materials. In: Lagoundas DC (ed) Shape memory alloys: modeling and engineering applications. Springer, Berlin, pp 53–119

Haberland C, Elahinia M, Walker JM, Meier H, Frenzel J (2014) On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing. In: Smart materials and structures, vol 23, p 104002 (1–13)

Bormann T, Schumacher R, Muller B, Mertmann M, de Wild M (2012) Tailoring selective laser melting process parameters for NiTi implants. J Mater Eng Perform 21:2519–2524

Shishkovsky I, Yadroitsev I, Smurov I (2012) Direct selective laser melting of nitinol powder. Phys Procedia 39:447–454

Zhang B, Chen J, Coddet C (2013) Microstructure and transformation behavior of in situ shape memory alloys by selective laser melting Ti-Ni mixed powder. J Mater Sci Technol 29:863–867

Shishkovsky IV, Yadroitsev IA, Smurov IY (2013) Manufacturing three-dimensional nickel titanium articles using layer-by-layer laser-melting technology. Tech Phys Lett 39:1081–1084

Habijan T, Haberland C, Meier H, Frenzel J, Wittsiepe J, Wuwer C et al (2013) The biocompatibility of dense and porous nickel–titanium produced by selective laser melting. Mater Sci Eng, C 33:419–426

Dadbakhsh S, Speirs M, Kruth J-P, Van Humbeeck J (2015) Influence of SLM on shape memory and compression behaviour of NiTi scaffolds. CIRP Ann Manufac Technol 64:209–212

Bormann T, Müller B, Schinhammer M, Kessler A, Thalmann P, de Wild M (2014) Microstructure of selective laser melted nickel–titanium. In: Materials characterization, vol 94, pp 189–202

Clare AT, Chalker PR, Davies S, Sutcliffe CJ, Tsopanos S (2008) Selective laser melting of high aspect ratio 3D nickel-titanium structures two way trained for MEMS applications. Int J Mech Mater Des 4:181–187

Speirs M, Wang X, Baelen SV, Ahadi A, Dadbakhsh S, Kruth J-P et al (2016) On the transformation behavior of NiTi shape-memory alloy produced by SLM. Shape Mem Superelast 2:310–316

Dadbakhsh S, Vrancken B, Kruth J-P, Luyten J, Van Humbeeck J (2016) Texture and anisotropy in selective laser melting of NiTi alloy. Mater Sci Eng, A 650:225–232

Khoo ZX, Ong C, Liu Y, Chua CK, Leong KF, Yang SF (2016) Selective laser melting of nickel titanium shape memory alloy. In 2nd international conference on progress in additive manufacturing, Nanyang Executive Centre, Nanyang Technological University, Singapore, 16–19 May 2016, pp 451–456

Khoo ZX, Lim YL, Liu Y, Chua CK (2016) Effect of hatch distance on selective laser melting of nickel titanium shape memory alloy. In: 2nd international conference in sports science & technology, Nanyang Executive Centre, Nanyang Technological University, Singapore, 12–13 Dec 2016, pp 98–101

Khoo ZX, Teoh JEM, Liu Y, Chua CK, Yang S, An J et al (2015) 3D printing of smart materials: a review on recent progresses in 4D printing. Virtual Phys Prototyp 10:103–122

Zhu HH, Fuh JYH, Lu L (2005) Microstructural evolution in direct laser sintering of Cu-based metal powder. Rapid Prototyp J 11:74–81

Khoo ZX, Low ZH, Liu Y, Chua CK, An J, Leong KF (2017) Repetitive laser scanning and shape recovery of SLM NiTi shape memory alloy. Submitted to Materials Letters

Yaws CL (2011) Chapter 66 Ni—nickel. In: Yaws handbook of properties of the chemical elements. Konvel, Norwich, pp 271–274

Yaws CL (2011) Chapter 103 Ti—titanium. In: Yaws handbook of properties of the chemical elements. Knovel, Norwich, pp 420–424

Miyazaki S, Kim HY (2011) Basic characteristics of titanium-nickel (Ti-Ni)-based and titanium-niobium (Ti-Nb)-based alloys. In: Yamauchi K, Ohkata I, Tsuchiya K, Miyazaki S (eds) Shape memory and superelastic alloys—technologies and applications. Woodhead Publishing Limited, Sawston, pp 15–42

Gu D, Shen Y (2009) Balling phenomena in direct laser sintering of stainless steel powder: metallurgical mechanisms and control methods. Mater Des 30:2903–2910

Tolochko NK, Laoui T, Khlopkov YV, Mozzharov SE, Titov VI, Ignatiev MB (2000) Absorptance of powder materials suitable for laser sintering. Rapid Prototyp J 6:155–160

Yadroitsev I, Bertrand P, Smurov I (2007) Parametric analysis of the selective laser melting process. Appl Surf Sci 253:8064–8069

Olakanmi EO, Cochrane RF, Dalgarno KW (2015) A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties. Prog Mater Sci 74:401–477

Morgan R, Sutcliffe CJ, O’Neill W (2004) Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives. J Mater Sci 39:1195–1205

Simchi A, Pohl H (2003) Effects of laser sintering processing parameters on the microstructure and densification of iron powder. Mater Sci Eng, A 359:119–128

Pohl H, Simchi A, Issa M, Dias HC (2001) Thermal stresses in direct metal laser sintering. In: Solid freeform fabrication symposium, University of Texas, Austin, pp 366–372

Frenzel J, George EP, Dlouhy A, Somsen C, Wagner MF-X, Eggeler G (2010) Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Mater 58:3444–3458

Bhagyaraj J, Ramaiah KV, Saikrishna CN, Bhaumik SK, Gouthama (2013) Behaviour and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot. J Alloys Compd 581:344–351

Mentz J, Frenzel J, Wagner MF-X, Neuking K, Eggeler G, Buchkremer HP et al (2008) Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures. Mater Sci Eng, A 491:270–278

Bansiddhi A, Dunand DC (2007) Shape-memory NiTi foams produced by solid-state replication with NaF. Intermetallics 15:1612–1622

Eggeler G, Hornbogen E, Yawny A, Heckmann A, Wagner M (2004) Structural and functional fatigue of NiTi shape memory alloys. Mater Sci Eng, A 378:24–33

Ortega AM, Tyber J, Frick CP, Gall K, Maier HJ (2005) Cast NiTi shape-memory alloys. Adv Eng Mater 7:492–507

Miyazaki S, Imai T, Igo Y, Otsuka K (1986) Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys. Metall Trans A 17:115–120

Paradis A, Terriault P, Brailovski V (2009) Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading. Comput Mater Sci 47:373–383

Liu Y, Xie Z (2007) Detwinning in shape memory alloy. In: Reece PL (ed) Progress in smart materials and structures. Nova Science Publishers, New York, pp 29–65

Delville R, Malard B, Pilch J, Sittner P, Schryvers D (2010) Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy. Acta Mater 58:4503–4515

Ataei M, Zarei-Hanzaki A, Shamsolhodaei A (2017) Shape memory response and mechanical properties of warm deformed NiTi intermetallic alloy. Mater Sci Eng, A 680:291–296

Liu Y, Humbeeck JV, Stalmans R, Delaey L (1997) Some aspects of the properties of NiTi shape memory alloy. J Alloys Compd 247:115–121