FDM process parameters influence over the mechanical properties of polymer specimens: A review

ISO/ASTM 52900, 2015

Kreemer, 2014, 2471

Wong, 2014, 3D printing of surgical instruments for long-duration space missions, Aviat Space Environ. Med., 85, 758, 10.3357/ASEM.3898.2014

Thompson, 2016, Design for additive manufacturing: trends, opportunities, considerations, and constraints, CIRP Ann. - Manuf. Technol., 65, 737, 10.1016/j.cirp.2016.05.004

Adam, 2015, On design for additive manufacturing: evaluating geometrical limitations, Rapid Prototyp. J., 21, 662, 10.1108/RPJ-06-2013-0060

Fodran, 1996, Mechanical and dimensional characteristics of fused deposition modeling build styles, 419

Bertoldi, 1998, Mechanical characterization of parts processed via fused deposition, 557

Es-Said, 2000, Effect of layer orientation on mechanical properties of rapid prototyped samples, Mater. Manuf. Process., 15, 107, 10.1080/10426910008912976

Rodriguez, 2001, Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental Investigation, Rapid Prototyp. J., 7, 148, 10.1108/13552540110395547

Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid Prototying J., 8, 248, 10.1108/13552540210441166

Lee, 2005, Optimization of rapid prototyping parameters for production of flexible ABS object, J. Mater. Process. Technol., 169, 54, 10.1016/j.jmatprotec.2005.02.259

Sun, 2008, Effect of processing conditions on the bonding quality of FDM polymer filaments, Rapid Prototyp. J., 14, 72, 10.1108/13552540810862028

Sood, 2010, Parametric appraisal of mechanical property of fused deposition modelling processed parts, Mater. Des., 31, 287, 10.1016/j.matdes.2009.06.016

Fatimatuzahraa, 2011, The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts, Business, Engineering and Industrial Applications (ISBEIA), 22

Sood, 2012, Experimental investigation and empirical modelling of FDM process for compressive strength improvement, J. Adv. Res., 3, 81, 10.1016/j.jare.2011.05.001

Croccolo, 2013, Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30, Comput. Mater. Sci., 79, 506, 10.1016/j.commatsci.2013.06.041

Durgun, 2014, Experimental investigation of FDM process for improvement of mechanical properties and production cost, Rapid Prototyp. J., 20, 228, 10.1108/RPJ-10-2012-0091

Gorski, 2014, Impact strength of ABS parts manufactured using fused deposition modeling technology, Arch. Mech. Tech. Autom., 31, 1

Baich, 2015, Study of infill print parameters on mechanical strength and production cost-time of 3D printed ABS parts, 209

Górski, 2015, Experimental determination of critical orientation of ABS parts manufactured using fused deposition modelling technology, J. Mach. Eng., 15, 121

Ziemian, 2012, Anisotropic mechanical properties of ABS parts fabricated by fused deposition modelling

Ziemian, 2015, Tensile and fatigue behavior of layered acrylonitrile butadiene styrene, Rapid Prototyp. J., 21, 270, 10.1108/RPJ-09-2013-0086

Onwubolu, 2014, Characterization and optimization of mechanical properties of ABS parts manufactured by the fused deposition modelling process, Int. J. Manuf. Eng.

Tymrak, 2014, Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions, Mater. Des., 58, 242, 10.1016/j.matdes.2014.02.038

Ebel, 2014, Fabrication of FDM 3D objects with ABS and PLA and determination of their mechanical properties, RTejournal

Rankouhi, 2016, Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation, J. Fail. Anal. Prev., 16, 467, 10.1007/s11668-016-0113-2

Lechter, 2015, Experimental study of mechanical properties of additively Manufactured abs plastic as a function of layer parameters

Fernandez-Vicente, 2016, Effect of infill parameters on tensile mechanical behavior in desktop 3D printing, 3D Print. Addit. Manuf., 3, 183, 10.1089/3dp.2015.0036

Alvarez, 2016, Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts, Ing. Invest., 36, 110, 10.15446/ing.investig.v36n3.56610

Hernandez, 2016, Analyzing the tensile, compressive, and flexural properties of 3D printed ABS P430 plastic based on printing orientation using fused deposition modeling, Solid Freeform Fabrication 2016, 939

Torrado, 2016, Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns, J. Fail. Anal. Prev., 16, 154, 10.1007/s11668-016-0067-4

Mahmood, 2017, Tensile strength of partially filled FFF printed parts: experimental results, Rapid Prototyp. J., 23, 122, 10.1108/RPJ-08-2015-0115

Raney, 2017, Experimental characterization of the tensile strength of ABS parts manufactured by fused deposition modeling process, Mater. Today: Proceedings, 4, 7956, 10.1016/j.matpr.2017.07.132

Tanikella, 2017, Tensile strength of commercial polymer materials for fused filament fabrication, 3D Print. Addit. Manuf., 17, 40

Cantrell, 2016, Experimental characterization of the mechanical properties of 3D printed ABS and polycarbonate parts, Adv. Opt. Met. Exp. Mech., 3, 89

Wittbrodt, 2015, The effects of PLA color on material properties of 3-D printed components, Addit. Manuf., 8, 110

Lanzotti, 2015, The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer, Rapid Prototyp. J., 21, 604, 10.1108/RPJ-09-2014-0135

Torres, 2015, Mechanical property optimization of FDM PLA in shear with multiple objectives, JOM, 67, 1183, 10.1007/s11837-015-1367-y

Li, 2018, The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties, Rapid Prototyp. J., 24, 80, 10.1108/RPJ-06-2016-0090

Torres, 2016, An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments, Rapid Prototyp. J., 22, 387, 10.1108/RPJ-07-2014-0083

Liu, 2017, Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method, Int. J. Adv. Manuf. Technol., 89, 2387, 10.1007/s00170-016-9263-3

Chacon, 2017, Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection, Mater. Des., 124, 143, 10.1016/j.matdes.2017.03.065

Bagsik, 2011, Mechanical properties of fused deposition modeling parts manufactured with Ultem 9085

Wu, 2015, Influence of layer thickness and raster angle on the mechanical properties of 3d-printed PEEK and a comparative mechanical study between PEEK and ABS, Materials, 8, 5834, 10.3390/ma8095271

Motaparti, 2016, 7513

Zaldivar, 2017, Influence of processing and orientation print effects on the mechanical and thermal behavior of 3d-printed ULTEM® 9085 material, Addit. Manuf., 13, 71

Xiaoyong, 2017, Experimental analysis of high temperature PEEK materials on 3D printing test, 13

Deng, 2018, Mechanical properties optimization of poly-ether-ether-ketone via fused deposition modeling, Materials, 11 216, 1

Masood, 2010, Tensile properties of processed FDM polycarbonate material, Mater. Sci. Forum, 654–656, 2556, 10.4028/www.scientific.net/MSF.654-656.2556

Hossain, 2013, Improving tensile mechanical properties of FDM-manufactured specimens via modifying build parameters, 380

Domingo-Espin, 2015, Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts, Mater. Des., 83, 670, 10.1016/j.matdes.2015.06.074

Knoop, 2015, Mechanical and thermal properties of FDM parts manufactured with polyamide 12, 935

Szykiedans, 2016, Mechanical properties of FDM and SLA low-cost 3-D prints, Procedia Eng., 136, 257, 10.1016/j.proeng.2016.01.207

Uddin, 2017, Evaluating mechanical properties and failure mechanisms of fused deposition modeling acrylonitrile butadiene styrene parts, J. Manuf. Sci. Eng. Trans. ASME, 139, 081018, 10.1115/1.4036713

Ciacala, 2018, Comparison of ultem 9085 used in fused deposition modelling (FDM) with polytherimide blends, Materials, 11 285, 1

Bellini, 2003, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyp. J., 9, 252, 10.1108/13552540310489631

Casavola, 2016, Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory, Mater. Des., 90, 453, 10.1016/j.matdes.2015.11.009

Patel, 2012, A review on various approaches for process parameter optimization of fused deposition modeling (FDM) process and Taguchi approach for optimization, Int. J. Eng. Res. Afr., 2, 361

Peng, 2014, Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system, Int. J. Adv. Manuf. Technol., 73, 87, 10.1007/s00170-014-5796-5

Vijayaraghavan, 2015, Process characterisation of 3D-printed FDM components using improved evolutionary computational approach, Int. J. Adv. Manuf. Technol., 78, 781, 10.1007/s00170-014-6679-5

Li, 2017, The quantitative research of interaction between key parameters and the effects on mechanical property in FDM, Adv. Mater. Sci. Eng., 10.1155/2017/9152954

Aliheidari, 2017, Fracture resistance measurement of fused deposition modeling 3D printed polymers, Polym. Test., 60, 94, 10.1016/j.polymertesting.2017.03.016

ISO 17296–3, 2014

Foster, A.M.; Materials Testing Standards for Additive Manufacturing of Polymer Materials: State of the Art and Standards Applicability, NISTIR 8059, available at: https://nvlpubs.nist.gov/nistpubs/ir/2015/NIST.IR.8059.pdf (accessed Oct 1, 2017).

Popescu, 2016, Low-temperature sterilization influence on fused deposition modelling parts, Proc. Manuf. Syst., 11, 151

Perez, 2012, Sterilization of FDM-manufactured parts, vols. 6–8, 285

Technical Considerations for Additive Manufactured Devices, 2016

Smith, 2013, Structural characteristics of fused deposition modeling, Polym. Test., 32, 1306, 10.1016/j.polymertesting.2013.07.014

Innomed Orthopedic Instruments, Foot&Ankle Instruments, available at: http://www.innomed.net/PDFsInnomed/InnoJBRedlerRet.pdf (accessed Dec 20, 2017).

Z-ULTRAT_Material_Data_Sheet_eng.pdf, Zortrax Company, http://support.zortrax.com/(accessed Jan 4, 2017).

Kondor, 2013, On demand additive manufacturing of a basic surgical kit, J. Med. Dev. Trans. ASME, 7, 030916, 10.1115/1.4024490

Rankin, 2014, Three dimensional printing surgical instruments: are we there yet?, J. Surg. Res., 189, 193, 10.1016/j.jss.2014.02.020

Hoang, 2016, Surgical applications of three-dimensional printing: a review of the current literature & how to get started, Ann. Transl. Med., 4, 1, 10.21037/atm.2016.12.18