Extra-insensitive shaper with distributed delays: Design and vibration suppress analysis

SAGE Publications - Tập 26 Số 15-16 - Trang 1185-1196 - 2020
Yuqi Huang1, Hongguang Li1, Jiwen Zhou1, Lili Meng1
1State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, People's Republic of China

Tóm tắt

Distributed delays have proved beneficial in eliminating vibrations in higher frequency ranges compared to the modeled frequency, but not in improving the robustness against the modeled frequency to modeling errors. In this paper, the extra-insensitive shaper with distributed delays is proposed to improve robustness and efficiency for systems with a large variation of modal frequencies. The extra-insensitive shaper with distributed delays is derived by distributing two zeros in the radial direction of the designed zero of the distributed zero-vibration shaper. Two methods of distributing zeros are provided to parameterize the extra-insensitive shaper with distributed delays. Asymmetric extra-insensitive shaper with distributed delays and symmetric extra-insensitive shaper with distributed delays are two types of the extra-insensitive shaper with distributed delays parameterized by the asymmetric distribution method and the symmetric distribution method. Properties of the Asymmetric extra-insensitive shaper with distributed delays and the symmetric extra-insensitive shaper with distributed delays in spectral, sensitivity and step response are analyzed and compared with those of the classical extra-insensitive shaper and distributed zero-vibration-derivative shaper. The results present larger robustness in variations of modeled and higher frequencies, suppressing the vibration of the modeled mode and unmodeled higher multiple modes to a tolerable level. The implement in the time-varying double-pendulum crane verifies the effectivity for vibration suppress of multi-mode systems.

Từ khóa


Tài liệu tham khảo

10.1049/ip-cta:19971439

10.1016/S1474-6670(17)58856-4

10.1016/j.jsv.2018.10.038

Fujioka D and Singhose W (2015) Performance comparison of input-shaped model reference control on an uncertain flexible system. In: Proceedings of the IFAC—workshop on time delay systems, Ann Arbor, MI, 28–30 June 2015. the Netherlands: Elsevier.

10.1177/1077546307080012

10.1109/ROBOT.1991.132020

10.1016/j.ymssp.2018.06.005

10.1115/1.4003377

10.1109/CCA.2003.1223186

10.1177/1077546314560389

10.1016/j.automatica.2013.08.015

10.1109/TRA.2004.825272

10.1115/1.2894142

10.2514/3.21630

10.2514/1.50270

Singhose W, 1996, Proceedings of Japan-USA symposium on flexible automation

10.1115/1.2907363

10.1115/1.2801257

10.1016/j.jsv.2008.02.032

10.1016/j.automatica.2015.06.025

10.23919/ECC.2013.6669560

10.1109/ASCC.2013.6606315

10.1016/j.automatica.2013.08.029

10.1109/TAC.2008.2008345

10.1177/1077546309341102

Thông tin
Thông tin xuất bản

SAGE Publications

Tập 26 Số 15-16

1185-1196

Thông tin tác giả