Exploring composites based on PPO blend as ablative thermal protection systems – Part II: The role of equiaxial fillers

Composite Structures - Tập 94 - Trang 1060-1066 - 2012
P. Fino1, M. Lombardi1, A. Antonini1, G. Malucelli1, L. Montanaro1
1Politecnico di Torino, Dept. of Materials Science and Chemical Engineering, C.so Duca degli Abruzzi 24, Torino, Italy

Tài liệu tham khảo

Ogata, 1997, Poly (vinyl alcohol)–clay and poly (ethylene oxide)–clay blends prepared using water as solvent, J Appl Polym Sci, 66, 573, 10.1002/(SICI)1097-4628(19971017)66:3<573::AID-APP19>3.0.CO;2-W Zhou, 2009, A novel fiber-reinforced polyethylene composite with added silicon nitride particles for enhanced thermal conductivity, Compos Part A – Appl Sci, 40, 830, 10.1016/j.compositesa.2009.04.005 He, 2007, Preparation and properties of Si3N4/PS composites used for electronic packaging, Compos Sci Technol, 67, 2493, 10.1016/j.compscitech.2006.12.014 Guo, 2008, Strengthening and thermal stabilization of polyurethane nanocomposites with silicon carbide nanoparticles by a surface-initiated-polymerization approach, Compos Sci Technol, 68, 164, 10.1016/j.compscitech.2007.05.031 Balat, 2000, Oxidation of sintered silicon carbide under microwave-induced CO plasma at high temperature: active–passive transition, Appl Surf Sci, 161, 434, 10.1016/S0169-4332(00)00314-7 Wang, 1998, Oxidation mechanism of Si3N4-bonded SiC ceramics by CO, CO2 and steam, J Mater Sci, 33, 1309, 10.1023/A:1004354415867 Shanmuganathan, 2007, Flame retardancy and char microstructure of nylon-6/layered silicate nanocomposites, J Appl Polym Sci, 104, 1540, 10.1002/app.25542 Majumdar, 2011, Oxidation behavior of MoSi2 and Mo(Si,Al)2 coated Mo–0.5Ti–0.1Zr–0.02C alloy, Intermetallics, 19, 541, 10.1016/j.intermet.2010.12.002 Morgan, 2011, Use of inorganic materials to enhance thermal stability and flammability behavior of a polyimide, Polym Degrad Stabil, 96, 23, 10.1016/j.polymdegradstab.2010.11.005 Kar, 2008, Acrylonitrile–butadiene–styrene nanocomposites filled with nanosized alumina, Polym Compos, 29, 489, 10.1002/pc.20387 Levin, 1998, Metastable alumina polymorphs: crystal structures and transition sequences, J Am Ceram Soc, 81, 1995, 10.1111/j.1151-2916.1998.tb02581.x Hamdani, 2010, Calcium and aluminium-based fillers as flame-retardant additives in silicone matrices. I. Blend preparation and thermal properties, Polym Degrad Stabil, 95, 1911, 10.1016/j.polymdegradstab.2010.04.013 Schilling, 2002, Rheology of alumina–nanoparticle suspensions: effects of lower saccharides and sugar alcohols, J Eur Ceram Soc, 22, 917, 10.1016/S0955-2219(01)00393-4 Kwak, 2002, Thermo-oxidative stability study of polypropylene composites by using cone calorimetry and thermogravimetry, Polym Eng Sci, 42, 1674, 10.1002/pen.11062