Experimental study on the physico-mechanical properties of Tamusu mudstone – A potential host rock for high-level radioactive waste in Inner Mongolia of China

Amann, 2011, Experimental study of the brittle behavior of clay shale in rapid unconfined compression, Rock Mech. Rock Eng., 44, 415, 10.1007/s00603-011-0156-3 Amann, 2012, Experimental study of brittle behavior of clay shale in rapid triaxial compression, Rock Mech. Rock Eng., 45, 21, 10.1007/s00603-011-0195-9 Andra, 2005 Armand, 2017, Main outcomes from in situ thermo-hydro-mechanical experiments programme to demonstrate feasibility of radioactive high-level waste disposal in the Callovo-Oxfordian claystone, J. Rock Mech. Geotech. Eng., 9, 415, 10.1016/j.jrmge.2017.03.004 Armand, 2017, Fundamental aspects of the hydromechanical behaviour of Callovo-Oxfordian claystone: from experimental studies to model calibration and validation, Comput. Geotech., 85, 277, 10.1016/j.compgeo.2016.06.003 Bastiaens, 2006 Bastiaens, 2007, SELFRAC: experiments and conclusions on fracturing, self-healing and self-sealing processes in clays, Phys. Chem. Earth, 32, 600, 10.1016/j.pce.2006.04.026 Bieniawski, 1979, Suggested methods for determining the uniaxial compressive strength and deformability of rock materials 1: suggested method for determination of the uniaxial compressive strength of rock materials, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 16, 138, 10.1016/0148-9062(79)91451-7 Bossart, 2017, Experiments on thermo-hydro- mechanical behaviour of Opalinus Clay at Mont Terri rock laboratory, Switzerland, J. Rock Mech. Geotech. Eng., 9, 502, 10.1016/j.jrmge.2016.11.014 Bossart, 2004, Structural and hydrogeological characterisation of the excavation-disturbed zone in the Opalinus clay (Mont Terri project, Switzerland), Appl. Clay Sci., 26, 429, 10.1016/j.clay.2003.12.018 Boulin, 2012, Contribution of the steady state method to water permeability measurement in very low permeability porous media, Oil Gas Sci. Technol., 67, 387, 10.2516/ogst/2011169 Chen, 2011, ATLAS III in situ heating test in boom clay: field data, observation and interpretation, Comput. Geotech., 38, 683, 10.1016/j.compgeo.2011.04.001 Chen, 2010, Role of Pyrite in maintaining the reductive environment of the near field for a high-level radioactive waste repository, Acta Phys. Chim. Sin., 26, 2489, 10.3866/PKU.WHXB20100917 Croise, 2004, Hydrogeological investigations in a low permeability claystone formation: the Mont Terri Rock Laboratory, Phys. Chem. Earth, 29, 3, 10.1016/j.pce.2003.11.008 de la Vaissière, 2015, Gas and water flow in an excavation-induced fracture network around an underground drift: a case study for a radioactive waste repository in clay rock, J. Hydrol., 521, 141, 10.1016/j.jhydrol.2014.11.067 De Bruyn, 1996, The influence of temperature on mechanical characteristics of Boom clay: the results of an initial laboratory programme, Eng. Geol., 41, 117, 10.1016/0013-7952(95)00029-1 Dehandschutter, 2004, Microfabric of fractured Boom Clay at depth: a case study of brittle-ductile transitional clay behaviour, Appl. Clay Sci., 26, 389, 10.1016/j.clay.2003.12.013 Dehandschutter, 2005, Brittle fractures and ductile shear bands in argillaceous sediments: inferences from Oligocene Boom Clay (Belgium), J. Struct. Geol., 27, 1095, 10.1016/j.jsg.2004.08.014 Delage, 2000, On the thermal consolidation of Boom clay, Can. Geotech. J., 37, 343, 10.1139/t99-105 Du, 2017, Estimation of the present-day stress field using in-situ stress measurements in the Alxa area, Inner Mongolia for China's HLW disposal, Eng. Geol., 220, 76, 10.1016/j.enggeo.2017.01.020 He, 2019, Sorption of selenite on Tamusu clay in simulated groundwater with high salinity under aerobic/anaerobic conditions, J. Environ. Radioact., 203, 210, 10.1016/j.jenvrad.2019.03.020 Helmy, 1998, The limited swelling of montmorillonite, J. Colloid Interface Sci., 207, 128, 10.1006/jcis.1998.5739 Hensen, 2002, Why clays swell, J. Phys. Chem. B, 106, 12664, 10.1021/jp0264883 Homand, 2004, Permeability determination of a deep argillite in saturated and partially saturated conditions, Int. J. Heat Mass Tran., 47, 3517, 10.1016/j.ijheatmasstransfer.2004.02.012 Hong, 2014, An elastoplastic model with combined isotropic-kinematic hardening to predict the cyclic behavior of stiff clays, Comput. Geotech., 62, 193, 10.1016/j.compgeo.2014.07.008 Huang, 2018 Kong, 2018, Engineering geological properties of weathered swelling mudstones and their effects on the landslides occurrence in the Yanji section of the Jilin-Hunchun high-speed railway, Bull. Eng. Geol. Environ., 77, 1491, 10.1007/s10064-017-1096-2 Kull, 2007, Measurement of thermally-induced pore-water pressure increase and gas migration in the Opalinus Clay at Mont Terri, Phys. Chem. Earth, 32, 937, 10.1016/j.pce.2006.04.036 Ma, 2018, Coupled thermo-hydro-mechanical anisotropy characteristics of clay based on the ATLAS III in situ heating test, Rock Soil Mech., 39, 426 Ma, 2016, Variation of the hydraulic conductivity of Boom Clay under various thermal-hydro-mechanical conditions, Eng. Geol., 212, 35, 10.1016/j.enggeo.2016.07.013 Martin, 2003, Measurement of in-situ stress in weak rocks at Mont Terri rock laboratory, Switzerland, Int. J. Rock Mech. Min. Sci., 40, 1077, 10.1016/S1365-1609(03)00113-8 Monfared, 2014, Temperature and damage impact on the permeability of Opalinus Clay, Rock Mech. Rock Eng., 47, 101, 10.1007/s00603-013-0459-7 Morrow, 2000, The effect of mineral bond strength and adsorbed water on fault gouge frictional strength, Geophys. Res. Lett., 27, 815, 10.1029/1999GL008401 Thury, 1999, The Mont Terri rock laboratory, a new international research project in a Mesozoic shale formation, 52, 347 Van Marcke, 2010, Excavation induced fractures in a plastic clay formation: observations at the HADES URF, J. Struct. Geol., 32, 1677, 10.1016/j.jsg.2010.01.010 Wang, 2017, Study on correlation between mineralogical composition and elastic modulus of clay rock for geological repository at home and abroad, Adv. Eng. Res., 135, 207 Weetjens, 2005 Wersin, 2004, Long-term diffusion experiment at Mont Terri: first results from field and laboratory data, Appl. Clay Sci., 26, 123, 10.1016/j.clay.2003.09.007 Wu, 2010, Laboratory experimental study of slaking characteristics of red-bed soft rock, Chin. J. Rock Mech. Eng., 29, 4173 Xiang, 2020, Mineralogical and hydraulic characteristics of mudstone in the Tamusu candidate area in northwest China for high-level radioactive waste geological disposal, Clay Miner., 55, 71, 10.1180/clm.2020.12 Yang, 2019, Experimental microscopic investigation of the cyclic swelling and shrinkage of a natural hard clay, Geotechnique, 69, 481, 10.1680/jgeot.17.P.053 Yu, 2018, Influence of temperature on the hydro-mechanical behavior of Boom Clay, Int. J. Rock Mech. Min. Sci., 108, 189, 10.1016/j.ijrmms.2018.04.023 Yu, 2015, Creep behavior of boom clay, Int. J. Rock Mech. Min. Sci., 76, 256, 10.1016/j.ijrmms.2015.03.009 Yu, 2012, Experimental study on the hydro-mechanical behavior of Boom clay, Int. J. Rock Mech. Min. Sci., 53, 159, 10.1016/j.ijrmms.2012.05.013 Yu, 2014, A transversely isotropic damage model for Boom Clay, Rock Mech. Rock Eng., 47, 207, 10.1007/s00603-012-0346-7 Zhang, 2016, The stress–strain–permeability behaviour of clay rock during damage and recompaction, J. Rock Mech. Geotech. Eng., 8, 16, 10.1016/j.jrmge.2015.10.001 Zhang, 2018, Thermo-hydro-mechanical behavior of clay rock for deep geological disposal of high-level radioactive waste, J. Rock Mech. Geotech. Eng., 10, 992, 10.1016/j.jrmge.2018.03.006 Zhang, 2017, Thermal effects on clay rocks for deep disposal of high-level radioactive waste, J. Rock Mech. Geotech. Eng., 9, 463, 10.1016/j.jrmge.2016.08.006 Zhang, 2020, Sorption of cesium on Tamusu clay in synthetic groundwater with high ionic strength, Radiochim. Acta, 108, 287, 10.1515/ract-2019-3161