Experimental study on the depth of abrasion in hydraulic structures using samples of geopolymer concrete

Hilo, 2019, Numerical and experimental study of abrasion erosion in hydraulic structures of high-velocity water flow, Proc.-Int. Conf. Dev. E-Systems Eng. DeSE, 415 Abid, 2019, Underwater abrasion of steel fiber reinforced self-compacting concrete, Case Stud. Cons. Mater., 11, 1 Ayoob, 2020, Analysis of abrasion rates in concrete surfaces of hydraulic structures, IOP Conf. Ser. Mater. Sci. Eng., 888, 1, 10.1088/1757-899X/888/1/012052 Horszczaruk, 2018, Use of 3D scanner for imagining concrete sample surfaces abraded with the ASTM C 1138 method, Creative Constr. Conf., 240 Abid, 2018, Experimental tests on the underwater abrasion of engineered cementitious composites, Constr. Build. Mater., 171, 779, 10.1016/j.conbuildmat.2018.03.213 Abid, 2020, Mechanical Properties of ECC Incorporating Low-Cost PVA Fibers, Appl. Mech. Mater., 897, 78, 10.4028/www.scientific.net/AMM.897.78 Hilo, 2018, Numerical model for flow on stilling basin type III, 126 Davidovits, 1989, Geopolymers and geopolymeric materials. J Thermal Anal 35: 429–441; and (1991) Geopolymers: inorganic polymeric materials. J Thermal Anal 37: 1633–1656; and Šesták J, Foller B (2012) Some aspects of composite inorganic polysialates, J. Thermal. Anal. Calor., 35, 429, 10.1007/BF01904446 Abid, 2021, Evaluation of mode II fracture toughness of hybrid fibrous geopolymer composites, Materials, 14, 349, 10.3390/ma14020349 Phair, 2001, Effect of silicate activator pH on the leaching and material characteristics of waste-based inorganic polymers, Miner. Eng., 14, 289, 10.1016/S0892-6875(01)00002-4 Xu, 2000, The geopolymerisation of alumino-silicate minerals, Int. J. Miner. Process., 59, 247, 10.1016/S0301-7516(99)00074-5 Ramujee, 2014, Permeability and abrasion resistance of geopolymer concrete, Indian Concrete J. Abdulhussein, 2021, Investigation of the Effect of Addition Nano-papyrus Cane on the Mechanical Properties of Concrete, Civil Eng. J., 7, 226, 10.28991/cej-2021-03091649 Liu, 2007, Improving the abrasion resistance of hydraulic-concrete containing surface crack by adding fume, Constr. Build. Mater., 21, 972, 10.1016/j.conbuildmat.2006.03.001 Hilo, 2019, Numerical and experimental study of abrasion erosion in hydraulic structures of high-velocity water flow, 415 Abid, 2018, Hydro-abrasive resistance of engineered cementitious composites with PP and PVA fibers, Constr. Build. Mater., 187, 168, 10.1016/j.conbuildmat.2018.07.194 Abdul-Hussein, 2020, Abrasion of Reactive Powder Concrete under Direct Water Impact, Appl. Mech. Mater., 897, 41, 10.4028/www.scientific.net/AMM.897.41 Ayoob, 2020, Water-impact abrasion of self-compacting concrete, Mag. Civ. Eng., 96, 60 Wardhono, 2017, The effect of slag addition on strength development of Class C fly ash geopolymer concrete at normal temperature, 020030, 10.1063/1.5003513 Liu, 2006, Abrasion erosion of concrete by water-borne sand, Cem. Concr. Res., 36, 1814, 10.1016/j.cemconres.2005.03.018 Grdić, 2014, Hydro-abrasive resistance and mechanical properties of rubberized concrete, Građevinar., 66, 11