Experimental study on the compression-shear performance of a new-type circumferential joint of shield tunnel

Admiraal, 2016, Why underground space should be included in urban planning policy – And how this will enhance an urban underground future, Tunnelling and Underground Space Technology, 55, 214, 10.1016/j.tust.2015.11.013 Cao, 2021, Experimental investigation of the shear mechanism on mortise and Tenon segment lining, China Journal of Highway and Transport, 34, 273 Chai, 2018, Predicting the performance of embankments on PVD-improved subsoils, Computers and Geotechnics, 93, 222, 10.1016/j.compgeo.2017.05.018 Ding, 2020, Experimental investigation on mechanical behavior of segmental joint under combined loading of compression-bending-shear, Tunnelling and Underground Space Technology, 98 Feng, 2018, Full-scale tests on bending behavior of segmental joints for large underwater shield tunnels, Tunnelling and Underground Space Technology, 75, 100, 10.1016/j.tust.2018.02.008 Gong, 2019, Experimental study on the ultimate shear bearing capacity of segment joint in shield tunnel with large quasi-rectangular cross-section, China Civil Engineering Journal, 52, 120 Huang, 2015, Simplified procedure for finite element analysis of the longitudinal performance of shield tunnels considering spatial soil variability in longitudinal direction, Computers and Geotechnics, 64, 132, 10.1016/j.compgeo.2014.11.010 Liu, 2022, Investigation of the structural effect induced by stagger joints in segmental tunnel linings: Numerical explanation via macro-level structural modeling, Tunnelling and Underground Space Technology, 120 Lu, 2020, Study on shearing characteristics of circumferential joint rebate of stagger-jointed shield tunnel, IOP Conference Series: Materials Science and Engineering, 735, 10.1088/1757-899X/735/1/012045 Putke, 2015, Experimental analyses of an optimized shear load transfer in the circumferential joints of concrete segmental linings, Structural Concrete, 16, 572, 10.1002/suco.201500013 Salemi, 2015, Normal and shear resistance of longitudinal contact surfaces of segmental tunnel linings, International Journal of Rock Mechanics and Mining Sciences, 77, 328, 10.1016/j.ijrmms.2015.04.014 Shen, 2013, Interpretation of increased deformation rate in aquifer IV due to groundwater pumping in Shanghai, Canadian Geotechnical Journal, 50, 1129, 10.1139/cgj-2013-0042 Wu, 2018, Soil-tunnel interaction modelling for shield tunnels considering shearing dislocation in longitudinal joints, Tunnelling and Underground Space Technology, 78, 168, 10.1016/j.tust.2018.04.009 Xiao, 2021, Analytical method of segment dislocation caused by synchronous grouting during tunnel construction, Tunnel Construction, 41, 2048 Ye, 2021, Investigating the relationship between erosion-induced structural damage and lining displacement parameters in shield tunnelling, Computers and Geotechnics, 133, 10.1016/j.compgeo.2021.104041 Zhang, 2018, Shearing behavior of segmental joints of large-diameter shield tunnel, 2, 351 Zhang, 2022, Waterproof performance of tunnel segmental joints under different deformation conditions, Tunnelling and Underground Space Technology, 123, 10.1016/j.tust.2022.104437 Zhang, 2020, Shearing behavior of circumferential joints with oblique bolts in large diameter shield tunnel, China Journal of Highway and Transport, 33, 142 Zhang, 2021, Waterproofing behavior of sealing gaskets for circumferential joints in shield tunnels: A full-scale experimental investigation, Tunnelling and Underground Space Technology, 108, 10.1016/j.tust.2020.103682 Zhang, 2021, Experimental study on compression–bending damage of segmental joints based on acoustic emission, Tunnelling and Underground Space Technology, 115, 10.1016/j.tust.2021.104078 Zheng, 2021, Transfer station cracks induced by cutting anchor cables and crack stabilization: A case study, Engineering Failure Analysis, 126, 10.1016/j.engfailanal.2021.105460 Zhu, 2017, Experimental study on shear property of circumferential joint in general ring segment under the staggered assembling, Journal of Railway Science and Engineering, 14, 315