Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites

Mouritza, 1999, Review of applications for advanced three-dimensional fiber textile composites, Composites: Part A, 30, 1445, 10.1016/S1359-835X(99)00034-2 Kamiya, 2000, Some recent advances in the fabrication and design of three-dimensional textile preforms: a review, Compos Sci Technol, 60, 33, 10.1016/S0266-3538(99)00093-7 Heimbs, 2010, Sandwich structures with textile-reinforced composite foldcores under impact loads, Compos Struct, 92, 1485, 10.1016/j.compstruct.2009.11.001 Wang, 2010, Experimental investigation of 3D sandwich structure with core reinforced by composite columns, Mater Des, 31, 158, 10.1016/j.matdes.2009.06.039 Zhao, 2012, Hierarchical composite honeycombs, Mater Des, 40, 124, 10.1016/j.matdes.2012.03.009 Shiah, 2004, Experimental characterization of an integrated sandwich composite using 3D woven fabrics as the core material, J Thermoplast Compos Mater, 17, 229, 10.1177/0892705704035410 van Vuure, 2000, Mechanical properties of composite panels based on woven sandwich fabric performs, Composites: Part A, 31, 671, 10.1016/S1359-835X(00)00017-8 Fan, 2010, An experiment study on the failure mechanisms of woven textile sandwich panels under quasi-static loading, Composites: Part B, 41, 686, 10.1016/j.compositesb.2010.07.004 Vaidya, 2000, Impact response of integrated hollow core sandwich composite panels, Composites: Part A, 31, 761, 10.1016/S1359-835X(00)00025-7 Cao, 2010, Influence of core height on them mechanical properties of 3D integrated hollow composites, J Shanghai Text Sci Technol, 38, 54 Bannister, 1999, The mechanical performance of 3D woven sandwich composites, Compos Struct, 47, 687, 10.1016/S0263-8223(00)00035-0 van Vuure, 2000, Modelling the core properties of composite panels based on woven sandwich-fabric performs, Compos Sci Technol, 60, 1263, 10.1016/S0266-3538(00)00070-1 Zhou, 2007, Experimental investigation on mechanical properties of hollow integrated sandwich composites, J Nanjing Univ Aeronaut Astronaut, 39, 11 Fan, 2011, Experimental research of compressive responses of multi-layered woven textile sandwich panels under quasi-static loading, Composites: Part B, 42, 1151, 10.1016/j.compositesb.2011.03.008 Vaidya, 2008, Impact response of three-dimensional multifunctional sandwich composite, Mater Sci Eng A, 472, 52, 10.1016/j.msea.2007.03.064 Shyr, 2004, Low velocity impact responses of hollow core sandwich laminate and interply hybrid laminate, Compos Struct, 64, 189, 10.1016/j.compstruct.2003.08.006 Hosur, 2007, Dynamic compression behavior of integrated core sandwich composites, Compos Sci Technol, 445, 54 GB/T 1454-2005, 2005 Fan, 2012, Ductile deformation mechanisms and designing instructions for integrated woven textile sandwich composites, Compos Sci Technol, 72, 1338, 10.1016/j.compscitech.2012.04.017 Caulfield, 2006, Crushing of a textile core sandwich panel, AIAA J, 44, 1339, 10.2514/1.17156 Zhang, 2013, Improving the bending strength and energy absorption of corrugated sandwich composite structure, Mater Des, 52, 767, 10.1016/j.matdes.2013.05.018 Yang, 2013, Hybrid lattice-core sandwich composites designed for microwave absorption, Mater Des, 50, 863, 10.1016/j.matdes.2013.03.032 Li, 2012, Effect of temperature on bending properties and failure mechanism of three-dimensional braided composite, Mater Des, 41, 167, 10.1016/j.matdes.2012.04.055 Hosur, 2004, Manufacturing and low-velocity impact characterization of hollow integrated core sandwich composites with hybrid face sheets, Compos Struct, 65, 103, 10.1016/j.compstruct.2003.10.013 Hosur, 2005, Manufacturing and low-velocity impact characterization of foam filled 3D integrated core sandwich composites with hybrid face sheets, Compos Struct, 69, 167, 10.1016/j.compstruct.2004.06.008