Experimental study on metallic water nanofluids flow inside rectangular duct equipped with circular pins (pin channel)

Khoshvaght-Aliabadi, 2014, Role of channel shape on performance of plate-fin heat exchangers: experimental assessment, Int. J. Therm. Sci., 79, 183, 10.1016/j.ijthermalsci.2014.01.004 Ashrafmansouri, 2014, Mass transfer in nanofluids: a review, Int. J. Therm. Sci., 82, 84, 10.1016/j.ijthermalsci.2014.03.017 Pang, 2015, Review on combined heat and mass transfer characteristics in nanofluids, Int. J. Therm. Sci., 87, 49, 10.1016/j.ijthermalsci.2014.07.017 Heidary, 2010, Effect of nano-particles on forced convection in sinusoidal–wall channel, Int. Commun. Heat Mass Transfer, 37, 1520, 10.1016/j.icheatmasstransfer.2010.08.018 Ahmed, 2011, Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid, Int. Commun. Heat Mass Transfer, 38, 1368, 10.1016/j.icheatmasstransfer.2011.08.013 Ahmed, 2012, Numerical investigations on the heat transfer enhancement in a wavy channel using nanofluid, Int. J. Heat Mass Transfer, 55, 5891, 10.1016/j.ijheatmasstransfer.2012.05.086 Ahmed, 2013, Effects of geometrical parameters on the flow and heat transfer characteristics in trapezoidal-corrugated channel using nanofluid, Int. Commun. Heat Mass Transfer, 42, 69, 10.1016/j.icheatmasstransfer.2012.12.012 Pandey, 2012, Experimental analysis of heat transfer and friction factor of nanofluid as a coolant in a corrugated plate heat exchanger, Exp. Therm. Fluid Sci., 38, 248, 10.1016/j.expthermflusci.2011.12.013 Akdag, 2014, Heat transfer enhancement with laminar pulsating nanofluid flow in a wavy channel, Int. Commun. Heat Mass Transfer, 59, 17, 10.1016/j.icheatmasstransfer.2014.10.008 Khoshvaght-Aliabadi, 2014, Experimental analysis of thermal–hydraulic performance of copper–water nanofluid flow in different plate-fin channels, Exp. Therm. Fluid Sci., 52, 248, 10.1016/j.expthermflusci.2013.09.018 Khoshvaght-Aliabadi, 2014, Effects of geometrical parameters on performance of plate-fin heat exchanger: vortex-generator as core surface and nanofluid as working media, Appl. Therm. Eng., 70, 565, 10.1016/j.applthermaleng.2014.04.026 Vanaki, 2014, Effect of nanoparticle shapes on the heat transfer enhancement in a wavy channel with different phase shifts, J. Mol. Liq., 196, 32, 10.1016/j.molliq.2014.03.001 Khoshvaght-Aliabadi, 2014, Wavy channel and different nanofluids effects on performance of plate-fin heat exchangers, J. Thermophys. Heat Transfer, 28, 474, 10.2514/1.T4209 Ahmed, 2014, The effects of wavy-wall phase shift on thermal-hydraulic performance of Al2O3–water nanofluid flow in sinusoidal-wavy channel, Case Stud. Therm. Eng., 4, 153, 10.1016/j.csite.2014.09.005 Khoshvaght-Aliabadi, 2014, Influence of different design parameters and Al2O3–water nanofluid flow on heat transfer and flow characteristics of sinusoidal-corrugated channels, Energy Convers. Manage., 88, 96, 10.1016/j.enconman.2014.08.042 Mohammed, 2011, Convective heat transfer and fluid flow study over a step using nanofluids: a review, Renew. Sustain. Energy Rev., 15, 2921, 10.1016/j.rser.2011.02.019 Payamavaran Nanotechnology Fardanegar (PNF) Nano Engineering & Manufacturing Co., <www.pnf-co.com>. Khoshvaght-Aliabadi, 2015, An experimental study of Cu–water nanofluid flow inside serpentine tubes with variable straight-section lengths, Exp. Therm. Fluid Sci., 61, 1, 10.1016/j.expthermflusci.2014.09.014 Khoshvaght-Aliabadi, 2015, Influence of twist length variations on thermal–hydraulic specifications of twisted-tape inserts in presence of Cu–water nanofluid, Exp. Therm. Fluid Sci., 61, 230, 10.1016/j.expthermflusci.2014.11.004 Zhu, 2009, Dispersion behavior and thermal conductivity characteristics of Al2O3–H2O nanofluids, Curr. Appl. Phys., 9, 131, 10.1016/j.cap.2007.12.008 Elango, 2015, Performance study on single basin single slope solar still with different water nanofluids, Desalination, 360, 45, 10.1016/j.desal.2015.01.004 Meyer, 2011, Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part I – Adiabatic pressure drop, Int. J. Heat Mass Transfer, 54, 1587, 10.1016/j.ijheatmasstransfer.2010.11.027 Meyer, 2013, The influence of multi-walled carbon nanotubes on single-phase heat transfer and pressure drop characteristics in the transitional flow regime of smooth tubes, Int. J. Heat Mass Transfer, 58, 597, 10.1016/j.ijheatmasstransfer.2012.11.074 Kays, 1984 Eiamsa-ard, 2010, Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes, Exp. Therm. Fluid Sci., 34, 53, 10.1016/j.expthermflusci.2009.09.002 Kline, 1953, Describing uncertainties in single-sample experiments, Mech. Eng., 75, 3 Gnielinski, 1976, New equations for heat and mass transfer in turbulent pipe and channel flow, Int. Chem. Eng., 16, 359 Notter, 1972, A solution to the Graetz problem – III. Fully developed region heat transfer rates, Chem. Eng. Sci., 27, 2073, 10.1016/0009-2509(72)87065-9 Petukhov, 1970, Heat transfer and friction in turbulent pipe flow with variable physical properties, 504, 10.1016/S0065-2717(08)70153-9 Khoshvaght-Aliabadi, 2015, Heat transfer enhancement by using copper–water nanofluid flow inside a pin channel, Exp. Heat Transfer, 28, 446, 10.1080/08916152.2014.907844 Kim, 2009, Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions, Curr. Appl. Phys., 9, 119, 10.1016/j.cap.2008.12.047 Duangthongsuk, 2010, An experimental study on the heat transfer performance and pressure drop of TiO2–water nanofluids flowing under a turbulent flow regime, Int. J. Heat Mass Transfer, 53, 334, 10.1016/j.ijheatmasstransfer.2009.09.024 Anoop, 2009, Effect of particle size on the convective heat transfer in nanofluid in the developing region, Int. J. Heat Mass Transfer, 52, 2189, 10.1016/j.ijheatmasstransfer.2007.11.063 Elias, 2014, Effect of different nanoparticle shapes on shell and tube heat exchanger using different baffle angles and operated with nanofluid, Int. J. Heat Mass Transfer, 70, 289, 10.1016/j.ijheatmasstransfer.2013.11.018