Experimental study on fatigue behavior of trapezoidal corrugated-web girders based on T-section members

Jiang, 2015, Prestressed concrete girder bridges with corrugated steel webs, J Struct Eng, 141, 04014108, 10.1061/(ASCE)ST.1943-541X.0001040 Elgaaly, 1996, Shear strength of beams with corrugated webs, J Struct Eng, 122, 390, 10.1061/(ASCE)0733-9445(1996)122:4(390) Li, 2009, Shear strength of H-beam with corrugated webs, J Tongji Univ (Natural Science), 37, 709 Guo, 2012, Design Principle and Application of Components with Sinusoidal Corrugated Web, Construct Technol, 41, 20 Harrison, 1965, Exploratory fatigue tests of two girders with corrugated webs, Br Weld J, 12, 121 Korashy M, Varga J. Comparative investigation of fatigue strength of beams with web plate stiffened in the traditional way and by corrugation. Acta Technica. 1979; 89 (3/4). Kotaki, 2004, A proposal of steel girder bridges with ripple web and their fatigue performance, Doboku Gakkai Ronbunshu, 2004, 233, 10.2208/jscej.2004.766_233 Ibrahim, 2006, Fatigue of corrugated-web plate girders: Experimental study, J Struct Eng, 132, 1371, 10.1061/(ASCE)0733-9445(2006)132:9(1371) Sause, 2006, Fatigue life of girders with trapezoidal corrugated webs, J Struct Eng, 132, 1070, 10.1061/(ASCE)0733-9445(2006)132:7(1070) Kövesdi, 2014, Fatigue life of girders with trapezoidally corrugated webs: An experimental study, Int J Fatigue, 64, 22, 10.1016/j.ijfatigue.2014.02.017 Li, 2012, Experimental investigation on fatigue performance of welded H-beam with corrugated webs, J Build Struct, 33, 96 Guo, 2015, Fatigue tests and design suggestions of H-shaped members with sinusoidal corrugated web, China Civil Eng J, 48, 48 Xu, 2019, Fatigue testing and analysis of I-girders with trapezoidal corrugated webs, Eng Struct, 196, 109344, 10.1016/j.engstruct.2019.109344 Ibrahim, 2006, Behavior of bridge girders with corrugated webs under monotonic and cyclic loading, Eng Struct, 28, 1941, 10.1016/j.engstruct.2006.03.026 Ibrahim, 2006, Fatigue of corrugated-web plate girders: analytical study, J Struct Eng, 132, 1381, 10.1061/(ASCE)0733-9445(2006)132:9(1381) Anami, 2005, Fatigue of web-flange weld of corrugated web girders: 1. Influence of web corrugation geometry and flange geometry on web-flange weld toe stresses, Int J Fatigue, 27, 373, 10.1016/j.ijfatigue.2004.08.006 Anami, 2005, Fatigue of web-flange weld of corrugated web girders: 2. Analytical evaluation of fatigue strength of corrugated web-flange weld, Int J Fatigue, 27, 383, 10.1016/j.ijfatigue.2004.08.007 American Association of State Highway Transportation Officials. AASHTO LRFD bridge design specifications. 5th ed. Washington, D.C.: American Association of State Highway and Transportation Officials; 2010. Save E, Åkermo K. Fatigue Performance of Welded Steel Girders with Corrugated Webs. 2020. Zhang, 2022, Effects of welding residual stresses on fatigue reliability assessment of a PC beam bridge with corrugated steel webs under dynamic vehicle loading, Structures, 45, 1561, 10.1016/j.istruc.2022.09.094 Oh, 2012, Accordion effect of prestressed steel beams with corrugated webs, Thin-Walled Struct, 57, 49, 10.1016/j.tws.2012.04.005 Abbas, 2006, Behavior of corrugated web I-girders under in-plane loads, J Eng Mech, 132, 806, 10.1061/(ASCE)0733-9399(2006)132:8(806) Abbas, 2007, Analysis of flange transverse bending of corrugated web I-girders under in-plane loads, J Struct Eng, 133, 347, 10.1061/(ASCE)0733-9445(2007)133:3(347) Abbas, 2007, Simplified analysis of flange transverse bending of corrugated web I-girders under in-plane moment and shear, Eng Struct, 29, 2816, 10.1016/j.engstruct.2007.01.006 Kövesdi, 2012, Stress distribution in the flanges of girders with corrugated webs, J Constr Steel Res, 79, 204, 10.1016/j.jcsr.2012.07.023 National code of the People's Republic of China for Welding of Steel Structures, GB 50661-2011. Beijing: China Architecture Publishing and Media Co., Ltd., 2011. Zhao X L, Herion S, Packer JA, Puthli RS, Sedlacek G, et al. Design guide for circular and rectangular hollow section welded joints under fatique loading. Design guide for circular and rectangular hollow section welded joints under fatique loading: TUV-Verlag; 2000. p. 1-121.