Experimental study of the mechanical properties and shrinkage of self-compacting concrete with binary and ternary mixes of fly ash and limestone filler

ACI 318. (2008). Building code requirements for structural concrete and commentary (479 p). USA: American Concrete Institute. Reported by ACI Committee 318. ISBN: 978-0-87031-283-0.

10.1016/j.conbuildmat.2012.04.034

ASTM C597-09, 2009, Standard test method for pulse velocity through concrete

10.1016/j.cemconres.2005.06.002

Coutinho A. de S. & Gonçalves A. (1994). Concrete production and properties (Vol. III, 368 p). Lisbon: National Laboratory for Civil Engineering. ISBN: 972-49-1645-6 (in Portuguese)

10.1016/j.cemconres.2005.07.001

10.1201/b11721

De Weerdt K, 2011

10.1680/stco.2008.9.2.109

10.1016/j.matdes.2012.11.015

EFNARC, BIBM, ERMCO, CEMBUREAU; EFCA, 2005, The European guidelines for self-compacting concrete – Specification, production and use

10.1016/j.buildenv.2006.01.012

10.4324/9780203478981

10.1016/j.conbuildmat.2012.02.034

10.1680/macr.2005.57.6.315

10.1016/j.conbuildmat.2009.12.012

LNEC E 397, 1993, Hardened concrete, determination of the modulus of elasticity of concrete in compression

LNEC E 398, 1993, Hardened concrete, determination of shrinkage and of swelling

LNEC E 466, 2005, Limestone fillers for hydraulic binders

Mehta P. K., 2005, Concrete microstructure, properties and materials

Mesbah H. A., 2002, ACI Materials Journal, 99, 37

Nepomuceno M. (2005). Methodology for self-compacting concretes design (PhD thesis, 734 p). Beira Interior University, Covilhã, Portugal (in Portuguese).

Nepomuceno M., 2008, ACI Materials Journal, 323

10.1016/j.conbuildmat.2011.06.027

Neville, A. M., 1995, Properties of concrete, 4

NP EN 1008, 2003, Mixing water for concrete, specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete

NP EN 12390-3, 2011, Testing hardened concrete, part 3: Compressive strength of test specimens

NP EN 12390-6 (Ed. 2), 2011, Testing hardened concrete, Part 6: Tensile splitting strength of test specimens

NP EN 12504-4, 2007, Testing concrete, part 4: Determination of ultrasonic pulse velocity

NP EN 12620, 2010, Aggregates for concrete

NP EN 197-1, 2008, A3, cement, part 1: Composition, specifications and conformity criteria for common cements

NP EN 1992-1-1, 2010, Design of concrete structures, part 1-1: General rules and rules for buildings

NP EN 206-1, 2007, Concrete, Part 1: Specification, performance, production and conformity

NP EN 206-9, 2010, Concrete, part 9: Additional rules for self-compacting concrete (SCC)

NP EN 450-1, 2008, A1, fly ash for concrete, part 1: Definition, specifications and conformity criteria

NP EN 450-2, 2006, Fly ash for concrete, part 2: Conformity evaluation

NP EN 934-1, 2008, Admixtures for concrete, mortar and grout, Part 1: Common requirements

NP EN 934-2, 2009, Admixtures for concrete, mortar and grout, part 2: Concrete admixtures, definitions, requirements, conformity, marking and labelling

10.1016/j.conbuildmat.2011.03.024

10.1016/j.conbuildmat.2010.06.037

10.1016/S0008-8846(00)00497-X

10.1016/j.conbuildmat.2015.03.110

10.1590/1516-1439.028715

Silva P., 2011, ACI Materials Journal, 108, 579

10.1016/j.conbuildmat.2009.12.007

Turk K., 2010, 9th International Congress on Advances in Civil Engineering, (ACE2010), 7

10.1016/j.conbuildmat.2011.07.049

10.1016/j.conbuildmat.2011.03.033

10.1016/j.conbuildmat.2010.10.009