Experimental study of the effects of temperature and humidity on the wear and damage behavior of U71Mn rail steel

Zhu, 2015, Mapping the friction between railway wheels and rails focusing on environmental conditions[J], Wear, 324–325, 122, 10.1016/j.wear.2014.12.028 Zhu, 2013, Friction between wheel and rail: a pin-on-disc study of environmental conditions and iron oxides[J], Tribol. Lett., 52, 327, 10.1007/s11249-013-0220-0 Zhu, 2019, A review on wear between railway wheels and rails under environmental conditions[J], J. Tribol., 141, 10.1115/1.4044464 Descartes, 2005, Presence and role of the third body in a wheel-rail contact[J], Wear, 258, 1081, 10.1016/j.wear.2004.03.068 Lewis, 2013, Effect of humidity, temperature and railhead contamination on the performance of friction modifiers: pin-on-disk study[J], Proc. Inst. Mech. Eng. - Part F J. Rail Rapid Transit, 227, 115, 10.1177/0954409712452239 Chang, 2018, An experimental study of high speed wheel-rail adhesion characteristics in condition on full scale roller rig[C] Lyu, 2015, Wear between wheel and rail: a pin-on-disc study of environmental conditions and iron oxides[J], Wear, 328–329, 277, 10.1016/j.wear.2015.02.057 Olofsson, 2004, Influence of leaf, humidity and applied lubrication on friction in the wheel-rail contact: pin-on-disc experiments[J], Proc. Inst. Mech. Eng. - Part F J. Rail Rapid Transit, 218, 235, 10.1243/0954409042389364 Kapoor, 1997, Wear by plastic ratchetting[J], Wear, 212, 119, 10.1016/S0043-1648(97)00083-5 Franklin, 2003, Ratcheting and fatigue-led wear in rail-wheel contact [J], Fatig. Fract. Eng. Mater. Struct., 26, 949, 10.1046/j.1460-2695.2003.00703.x Jiang, 2020, Effect of sliding speed and hardness on wear behavior and mechanism of AISI H13 steel[J], Proc. IME J. J. Eng. Tribol., 234, 1822, 10.1177/1350650119890728 White, 2018, Effect of the presence of moisture at the wheel–rail interface during dew and damp conditions[J], Proc. Inst. Mech. Eng. - Part F J. Rail Rapid Transit, 232, 979, 10.1177/0954409717706251 White, 2019, Simulation and understanding the wet-rail phenomenon using twin disc testing[J], Tribol. Int., 136, 475, 10.1016/j.triboint.2019.03.067 Buckley-Johnstone, 2020, Full-scale testing of low adhesion effects with small amounts of water in the wheel/rail interface[J], Tribol. Int., 141, 10.1016/j.triboint.2019.105907 Shi, 2018, Influence of low temperature environment on the adhesion characteristics of wheel-rail contact[J], Tribol. Int., 127, 59, 10.1016/j.triboint.2018.05.037 Ma, 2018, On the wear and damage characteristics of rail material under low temperature environment condition[J], Wear, 394–395, 149, 10.1016/j.wear.2017.10.011 Zhou, 2020, Study on the wear and damage behaviors of hypereutectoid rail steel in low temperature environment[J], Wear, 456–457 Zhou, 2021, Experimental study on the wear and damage of wheel-rail steels under alternating temperature conditions[J], Wear, 477, 10.1016/j.wear.2021.203829 Cao, 2022, Exceptionally prolonged extreme heat waves over South China in early summer 2020: the role of warming in the tropical Indian Ocean[J], Atmos. Res., 278, 10.1016/j.atmosres.2022.106335 Rong, 2021, Influence of ambient humidity on the adhesion and damage behavior of wheel–rail interface under hot weather condition[J], Wear, 486–487 Sanchis, 2020, Risk of increasing temperature due to climate change on high-speed rail network in Spain [J], Transport. Res. Transport Environ., 82 Shen, 2022, Role of ambient temperature in the adhesion and damage characteristics of wheel/rail interface during rolling-sliding contact, Wear, 506–507 Liu, 2022, New insight on wheel flange/rail gauge lubrication: effect of lasered microtexture shapes on the wear and fatigue behaviour of wheel/rail steels [J], Wear, 498–499 Tyfour, 1995, The steady state wear behaviour of pearlitic rail steel under dry rolling–sliding contact conditions[J], Wear, 180, 79, 10.1016/0043-1648(94)06533-0 Lewis, 2004, Wear mechanisms and transitions in railway wheel steels[J], Proc. IME J. J. Eng. Tribol., 218, 467, 10.1243/1350650042794815 Leso, 2022, Study of rolling contact fatigue, rolling and sliding wear of class B wheel steels against R350HT and R260 rail steels under dry contact conditions using the twin disc setup[J], Tribol. Int., 174, 10.1016/j.triboint.2022.107711 Kato, 2007, Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces [J], Wear, 262, 36, 10.1016/j.wear.2006.03.046 Dorgham, 2021, Understanding the effect of water on the transient decomposition of zinc dialkyldithiophosphate (ZDDP)[J], Tribol. Int., 157, 10.1016/j.triboint.2021.106855 He, 2016, Experimental investigation on the effect of operating speeds on wear and rolling contact fatigue damage of wheel materials[J], Wear, 364–365, 257, 10.1016/j.wear.2016.08.006 Liu, 2020, Influence of original microstructure on rolling contact fatigue property of D2 wheel steel, J]. Wear, 456–457 Hu, 2021, Experimental study on wear properties of wheel and rail materials with different hardness values[J], Wear, 477, 10.1016/j.wear.2021.203831 Hu, 2021, Microstructure evolution of railway pearlitic wheel steels under rolling-sliding contact loading[J], Tribol. Int., 154, 10.1016/j.triboint.2020.106685 Liu, 2022, Study on wear and rolling contact damage mechanism between quenched U75V rail and wheels with different microstructures, J]. Wear, 512–513