Experimental study of lateral-torsional buckling behavior of stainless steel welded I-section beams

Amedo, A., Mirarnbell, E., and Real, E. (1998). “Deformations of flexural members of austenitic stainless steel.” Journal of Construct Steel Research, 46(1–3), pp. 4–6.

ASCE (2002). Specification for the design of cold-formed stainless steel structural members. SEI/ASCE 8-02, American Society of Civil Engineers, Virginia.

AS/NZS (2001). Cold formed stainless steel structures. AS/ NZS 4673:2001, Standards Australia/Standards Zealand, Standards Australia International Ltd., Sydney.

Bredenkamp, P. J., van den Berg, G. J., and van der Merwe, P. (1998). “Behavior of hot-rolled and built-up stainless steel structural members.” Journal of Constructional Steel Research, 46(1–3), pp. 4–4.

Bredenkamp, P. J. and Van Den Berg, G. J. (1994). “The lateral torsional buckling strength of cold-formed stainless steel beams.” Proc. Twelfth International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, University of Missouri-Rolla, Missouri, pp. 539–549.

Cruise, R. B. and Gardner, L. (2008). “Residual stress analysis of structural stainless steel sections.” Journal of Constructional Steel Research, 64(3), pp. 352–366.

ECS (2006). Eurocode 3: Design of steel structures.-Part 1–4: General rules-Supplementary rules for stainless steels. EN 1993-1-4, European Committee for Standardization, BSI, London.

Gardner, L. (2002). A new approach to stainless steel structural design. Ph.D. Thesis, Structures Section, Department of Civil Engineering, Imperial College, London.

Gardner, L. and Cruise, R. B. (2009). “Modeling of residual stresses in structural stainless steel sections.” Journal of Structural Engineering, 135(1), pp. 42–53.

Gardner, L. and Nethercot, D. A. (2004). “Experiments on stainless steel hollow sections. Part 2: Member behavior of columns and beams.” Journal of Constructional Steel Research, 60(9), pp. 1319–1332.

Gardner, L. and Theofanous, M. (2008). “Discrete and continuous treatment of local buckling in stainless steel elements.” Journal of Constructional Steel Research, 64(11), pp. 1207–1216.

Jandera, M., Gardner, L., and Machacek, J. (2008). “Residual stresses in cold-rolled stainless steel hollow sections.” Journal of Constructional Steel Research, 64(11), pp. 1255–1263.

Klopper, J. and Laubscher, R. F. (2006). “The lateral torsional buckling strength of hot-rolled 3CR12 beams.” Journal of the South African Institution of Civil Engineering, 48(1), pp. 8–13.

Korvink, S. A., Berg, G. J., and Merwe, P. (1995). “Web crippling of stainless steel cold-formed beams.” Construct Steel Research, 34(2–3), pp. 225–248.

Kuwamura, H. (2003). “Local buckling of thin-walled stainless steel members.” International Journal of steel structures, 3(3), pp. 191–201.

Mirambell, E. and Real, E. (2000). “On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation.” Journal of Constructional Steel Research, 54(1), pp. 109–133.

Quach, W. M., Teng, J. G., and Chung, K. F. (2008). “Three-Stage Full-Range Stress-Strain Model for Stainless Steel.” Journal of Structural Engineering, 134 (9), pp. 1518–1527.

Rasmussen, K., Burns, T., Bezkorovainy, P., and Bambach, M. R. (2003). “Local buckling of cold-formed stainless steel sections.” Proc. Stainless Steel Structures International Experts’ Seminar, Ascot, UK, pp. 1–19.

Rasmussen, K., Burns, T., Bezkorovainy, P., and Bambach, M. R. (2003). “Numerical modeling of stainless steel plates in compression.” Journal of Constructional Steel Research, 59(11), pp. 1345–1362.

Rasmussen, K. J. R. and Hancock, G. J. (1993). “Design of cold-formed stainless steel tubular members. II: Beams.” Journal of Structural Engineering, 119(8), pp. 2368–2386.

Real, E. and Mirambell, E. (2001). “Experimental investigation on flexural behavior of stainless steel beams.” Proc. Tenth International Conference on Computational Methods and Experimental Measurements, University of Alicante, Alicante, pp. 361–370.

Real, E. and Mirambell, E. (2005). “Flexural behavior of stainless steel beams.” Engineering Structures, 27(10), pp. 1465–1475.

Theofanous, M., Chan, T. M., and Gardner, L. (2009). “Flexural behaviour of stainless steel oval hollow sections.” Thin-Walled Structures, 47(6–7), pp. 776–787.

Tebedge, N., Alpsten, G., and Tall, L. (1973) “Residual-stress measurement by the sectioning method.” Experimental Mechanics, 13(2), pp. 88–96.

Young, B. (2008). “Experimental and numerical investigation of high strength stainless steel structures.” Journal of Constructional Steel Research, 64(11), pp. 1225–1230.

Van Wyk, M. L., Van den Berg, G. J., and Van der Merwe, P. (1990). “Lateral torsional buckling strength of doubly symmetric stainless steel beams.” Proc. Tenth International Speciality on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, University of Missouri-Rolla, Missouri, pp. 493–504.

Zhou, F. and Young, B. (2005). “Tests of cold-formed stainless steel tubular flexural members.” Thin-Walled Structures, 43(9), pp. 1325–1337.

Zhou, F. and Young, B. (2006) “Cold-formed stainless steel sections subjected to web crippling.” Journal of Structural Engineering, 132(1), pp. 134–144.

Zhou, F. and Young, B. (2007a) “Cold-formed high-strength stainless steel tubular sections subjected to web crippling.” Journal of Structural Engineering, 133(3), pp. 368–377.

Zhou, F. and Young, B. (2007b). “Experimental investigation of cold-formed high-strength stainless steel tubular members subjected to combined bending and web crippling.” Journal of Structural Engineering, 133(7), pp. 1027–1034.

Zhou, F. and Young, B. (2007c). “Experimental and numerical investigations of cold-formed stainless steel tubular sections subjected to concentrated bearing load.” Journal of Constructional Steel Research, 63(11), pp. 1452–1466.