Experimental simulation of asymmetric heat up of coolant channel under small break LOCA condition for PHWR

Brown, 1984, Degraded cooling in a CANDU reactor, Nucl. Sci. Eng., 88, 425, 10.13182/NSE84-A18596 Gillespie, 1981, An experimental investigation of heat transfer from a reactor fuel channel to surrounding water, 157 Gulshani, 1987, Prediction of pressure tube integrity for a small LOCA and total loss of emergency coolant injection in CANDU, Trans. Am. Nucl. Soc., 55, 461 Gupta, 1996, A study of Indian PHWR reactor channel under prolonged deteriorated flow conditions Kohn, 1985, CANDU fuel development during severely degraded cooling: experimental results Majumdar, 2004, Simulation of pressure tube deformation during high temperature transients, Int. J. Press. Vessels Piping, 81, 575, 10.1016/j.ijpvp.2004.04.010 Nandan, 2010, Experimental investigation of sagging of a completely voided pressure tube of Indian PHWR under heatup condition, Nucl. Eng. Des., 240, 3504, 10.1016/j.nucengdes.2010.05.042 Nandan, 2012, Study of ballooning of a completely voided pressure tube of Indian PHWR under heat up condition, Nucl. Eng. Des., 243, 301, 10.1016/j.nucengdes.2011.11.007 Shewfelt, 1984, High temperature creep model for Zr–2.5wt.% Nb pressure tubes, J. Nucl. Mater., 125, 228, 10.1016/0022-3115(84)90548-8 Shewfelt, 1985, A high temperature longitudinal strain rate equation for Zr–2.5wt% Nb pressure tubes, J. Nucl. Mater., 132, 41, 10.1016/0022-3115(85)90391-5 So, 1987, The experimental determination of circumferential temperature distributions developed in pressure tube during slow coolant boil down, 241 Yuen, 1988, The experimental measurement of circumferential temperature distributions developed on pressure tubes under stratified two-phase of conditions, 120