Experimental investigation on inelastic behavior of composite box girder under negative moment

AASHTO (2004). LRFD bridge design specifications, 3rd Ed., Washington, D.C., USA.

Ahn, I.-S., Chiewanichakorn, M., Chen, S. S., and Aref, A. J. (2004). “Effective flange width provisions for composite steel bridges.” Eng. Struct., 26(12), pp. 1843–1851.

Basu, P. K., Sharif, A. M., and Ahmed, N. U. (1987). “Partially prestressed continuous composite beams.” J. Struct. Eng., ASCE, 113(9), pp. 1909–1925.

Chen, S. (2005). “Experimental study of prestressed steelconcrete composite beams with external tendons for negative moments.” J. Constr. Steel Res., 61(12), pp. 1613–1630.

Chen, S., and Jia, Y. (2010). “Numerical investigation of inelastic buckling of steel-concrete composite beams prestressed with external tendons.” Thin-Walled Structures, 48(3), pp. 233–242.

Chen, S. and Jia, Y. (2008). “Required and available moment redistribution of continuous steel-concrete composite beams.” J. Constr. Steel Res., 64(2), pp. 167–175.

Chen, S., Wang, X., and Jia, Y. (2009). “A comparative study of continuous steel-concrete composite beams prestressed with external tendons: Experimental investigation.” J. Constr. Steel Res., 65(7), pp. 1480–1489.

Chen, S. S., Aref, A. J., Chiewanichakorn, M., and Ahn, I.-S. (2007). “Proposed effective width criteria for composite bridge girders.” Journal of Bridge Engineering, 12(3), pp. 325–338.

CEB-FIP Model Code 1990 (1993). CEB-FIP Model Code 1990, Comite Euro-International du Beton, Thomas Telford.

Dekker, N. W., Kemp, A. R., and Trinchero, P. (1995). “Factors influencing the strength of continuous composite beams in negative bending.” J. Constr. Steel Res., 34(2–3), pp. 161–185.

EN 1993-1-1 (2005). Eurocode 3: Design of steel structures Part 1.1 General rules and rules for buildings. CENEuropean Committee for Standardization, Brussels.

EN 1994-1-1 (2005). Eurocode 4: Design of composite steel and concrete structures Part 1.1 General rules and rules for buildings. CEN-European Committee for Standardization, Brussels.

Fabbrocino, G., Manfredi, G., and Cosenza, E (2000). “Nonlinear behaviour of continuous steel-concrete composite beams.” Proc., Composite Construction in Steel and Concrete IV: Proceedings of the 4th International Conference, ASCE.

Fan, J., Nie, J., and Li, Q. (2010a). “Long-term behavior of composite beams under positive and negative bending. II: Analytical study.” J. Struct. Eng., ASCE, 136(7), pp. 858–865.

Fan, J., Nie, J., Li, Q., and Wang, H. (2010b). “Long-term behavior of composite beams under positive and negative bending. I: Experimental study.” J. Struct. Eng., ASCE, 136(7), pp. 849–857.

GB 50010-2002 (2002). Code for design of concrete structure. Ministry of Construction of China, China Communications Press, Beijing, China (in Chinese).

GB 50017-2003 (2003). Code for design of steel structures. Ministry of Construction of China, China Communications Press, Beijing, China (in Chinese).

Gilbert, R. I. and Bradford, M. A. (1995). “Time-dependent behavior of continuous composite beams at service loads.” J. Struct. Eng., ASCE, 121(2), pp. 319–327.

Guezouli, S. and Aribert, J.-M (2006). “Numerical investigation of moment redistribution in continuous beams of composite bridges.” Proc. Composite Construction in Steel and Concrete V: Proceedings of the 5th International Conference, ASCE.

Hajjar, J. F., Krzmarzick, D., and Pallarés, L. (2010). “Measured behavior of a curved composite I-girder bridge.” J. Constr. Steel Res., 66(3), pp. 351–368.

He, J., Liu, Y., Chen, A., and Yoda, T. (2010). “Experimental study on inelastic mechanical behaviour of composite girders under hogging moment.” J. Constr. Steel Res., 66(1), pp. 37–52.

JTG D60-2004 (2004). General code for design of highway bridges and culverts. Ministry of Communication of China, China Communications Press, Beijing, China (in Chinese).

JTG D62-2004 (2004). Code for design of highway reinforced concrete and prestressed concrete bridges and culverts. Ministry of Communication of China, China Communications Press, Beijing, China (in Chinese).

Kwak, H.-G. and Seo, Y.-J. (2000). “Long-term behavior of composite girder bridges.” Computers & Structures, 74(5), pp. 583–599.

Lääne, A. and Lebet, J.-P. (2005). “Available rotation capacity of composite bridge plate girders under negative moment and shear.” J. Constr. Steel Res., 61(3), pp. 305–327.

Macorini, L., Fragiacomo, M., Amadio, C., and Izzuddin, B. A. (2006). “Long-term analysis of steel-concrete composite beams: FE modelling for effective width evaluation.” Eng. Struct., 28(8), pp. 1110–1121.

Mallick, S. K. and Chattopadhyay, S. K. (1975). “Ultimate strength of continuous composite beams.” Building Science, 10(3), pp. 189–198.

Pendharkar, U., Chaudhary, S., and Nagpal, A. K. (2007). “Neural network for bending moment in continuous composite beams considering cracking and time effects in concrete.” Eng. Struct., 29(9), pp. 2069–2079.

Ramm, W., and Elz, S. (2000). “Ductility and cracking of slabs as part of continuous composite beams in regions with hogging bending moments.” Proc. the 4 th International Conference on Composite Construction in Steel and Concrete, ASCE.

Randl, E. and Johnson, R. P. (1982). “Widths of initial cracks in concrete tension flanges of composite beams.” In: IABSE proceedings P-54/82, pp. 69–80.

Reddy, E. S. and Binienda, W. K. (1994). “Prediction of crack initiation in unidirectional composite beams subject to four-point bending.” Compos. Eng., 4(7), pp. 703–714.

Ryu, H.-K. and Chang, S.-P. (2005). “Ultimate strength of continuous composite box-girder bridges with precast decks.” J. Constr. Steel Res., 61(3), pp. 329–343.

Ryu, H.-K., Chang, S.-P., Kim, Y.-J., and Kim, B.-S. (2005). “Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments.” Eng. Struct., 27(11), pp. 1613–1624.

Ryu, H.-K., Kim, Y.-J., and Chang, S.-P. (2007). “Crack control of a continuous composite two-girder bridge with prefabricated slabs under static and fatigue loads.” Eng. Struct., 29(6), pp. 851–864.

Ryu, H.-K., Shim, C.-S., Chang, S.-P., and Chung, C.-H. (2004). “Inelastic behaviour of externally prestressed continuous composite box-girder bridge with prefabricated slabs.” J. Constr. Steel Res., 60(7), pp. 989–1005.

Shim, C.-S. and Chang, S.-P. (2003). “Cracking of continuous composite beams with precast decks.” J. Constr. Steel Res., 59(2), pp. 201–214.

Virtuoso, F. and Vieira, R. (2004). “Time dependent behaviour of continuous composite beams with flexible connection.” J. Constr. Steel Res., 60(3–5), pp. 451–463.