Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpoints

Energy - Tập 138 - Trang 682-695 - 2017
Mohammad Sardarabadi1, Mohammad Hosseinzadeh1, Arash Kazemian1, Mohammad Passandideh‐Fard1
1Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Tóm tắt

Từ khóa


Tài liệu tham khảo

Höök, 2013, Depletion of fossil fuels and anthropogenic climate change—a review, Energy Policy, 52, 797, 10.1016/j.enpol.2012.10.046

Park, 2014, Energy and exergy analysis of typical renewable energy systems, Renew Sustain Energy Rev, 30, 105, 10.1016/j.rser.2013.09.011

Bai, 2016, Technical and economic effects of cooling of monocrystalline photovoltaic modules under Hungarian conditions, Renew Sustain Energy Rev, 60, 1086, 10.1016/j.rser.2016.02.003

Katkar, 2011, Performance & evaluation of industrial solar cell wrt temperature and humidity, Int J Res Mech Eng Technol, 1, 69

Ma, 2015, Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: a review and outlook, Renew Sustain Energy Rev, 43, 1273, 10.1016/j.rser.2014.12.003

Yazdanpanahi, 2015, Experimental investigation of exergy efficiency of a solar photovoltaic thermal (PVT) water collector based on exergy losses, Sol Energy, 118, 197, 10.1016/j.solener.2015.04.038

Sobhnamayan, 2014, Optimization of a solar photovoltaic thermal (PV/T) water collector based on exergy concept, Renew Energy, 68, 356, 10.1016/j.renene.2014.01.048

Fujisawa, 1997, Annual exergy evaluation on photovoltaic-thermal hybrid collector, Sol Energy Mater Sol Cells, 47, 135, 10.1016/S0927-0248(97)00034-2

Chow, 2009, Energy and exergy analysis of photovoltaic–thermal collector with and without glass cover, Appl Energy, 86, 310, 10.1016/j.apenergy.2008.04.016

Mishra, 2013, Energy and exergy analysis of hybrid photovoltaic thermal water collector for constant collection temperature mode, Sol Energy, 90, 58, 10.1016/j.solener.2012.12.022

Wu, 2015, A review on the methodology for calculating heat and exergy losses of a conventional solar PV/T system, Int J Green Energy, 12, 379, 10.1080/15435075.2013.840833

Hazami, 2016, Energetic and exergetic performances analysis of a PV/T (photovoltaic thermal) solar system tested and simulated under to Tunisian (North Africa) climatic conditions, Energy, 107, 78, 10.1016/j.energy.2016.03.134

Ghadiri, 2015, Experimental investigation of a PVT system performance using nano ferrofluids, Energy Convers Manag, 103, 468, 10.1016/j.enconman.2015.06.077

Sardarabadi, 2016, Experimental and numerical study of metal-oxides/water nanofluids as coolant in photovoltaic thermal systems (PVT), Sol Energy Mater Sol Cells, 157, 533, 10.1016/j.solmat.2016.07.008

Wu, 2009, Pressure drop and heat transfer of Al2O3-H2O nanofluids through silicon microchannels, J Micromech Microeng, 19, 105020, 10.1088/0960-1317/19/10/105020

Mahendran, 2012, Performance of evacuated tube solar collector using water-based titanium oxide nanofluid, J Mech Eng Sci, 3, 301, 10.15282/jmes.3.2012.6.0028

Said, 2015, Performance enhancement of a flat plate solar collector using titanium dioxide nanofluid and polyethylene glycol dispersant, J Clean Prod, 92, 343, 10.1016/j.jclepro.2015.01.007

Al-Shamani, 2016, Experimental studies of rectangular tube absorber photovoltaic thermal collector with various types of nanofluids under the tropical climate conditions, Energy Convers Manag, 124, 528, 10.1016/j.enconman.2016.07.052

Elmir, 2012, Numerical simulation of cooling a solar cell by forced convection in the presence of a nanofluid, Energy Proced, 18, 594, 10.1016/j.egypro.2012.05.072

Xu, 2014, Concentration photovoltaic–thermal energy co-generation system using nanofluids for cooling and heating, Energy Convers Manag, 87, 504, 10.1016/j.enconman.2014.07.047

Khanjari, 2017, Evaluating the environmental parameters affecting the performance of photovoltaic thermal system using nanofluid, Appl Therm Eng, 115, 178, 10.1016/j.applthermaleng.2016.12.104

Leong, 2012, Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature, Int Commun Heat Mass Transf, 39, 1169, 10.1016/j.icheatmasstransfer.2012.06.009

Bianco, 2014, Entropy generation analysis of turbulent convection flow of Al2O3–water nanofluid in a circular tube subjected to constant wall heat flux, Energy Convers Manag, 77, 306, 10.1016/j.enconman.2013.09.049

Mahian, 2013, A review of entropy generation in nanofluid flow, Int J Heat Mass Transf, 65, 514, 10.1016/j.ijheatmasstransfer.2013.06.010

Alim, 2013, Analyses of entropy generation and pressure drop for a conventional flat plate solar collector using different types of metal oxide nanofluids, Energy Build, 66, 289, 10.1016/j.enbuild.2013.07.027

Said, 2014, Analyses of exergy efficiency and pumping power for a conventional flat plate solar collector using SWCNTs based nanofluid, Energy Build, 78, 1, 10.1016/j.enbuild.2014.03.061

Vijayalakshmi, 2015, Entropy generation analysis of 10Wp photovoltaic thermal hybrid system, vol. 766, 1174

Sardarabadi, 2014, Experimental investigation of the effects of silica/water nanofluid on PV/T (photovoltaic thermal units), Energy, 66, 264, 10.1016/j.energy.2014.01.102

Drexler, 2012, Amphiphilic nanohybrid catalysts for reactions at the water/oil interface in subsurface reservoirs, Energy & Fuels, 26, 2231, 10.1021/ef300119p

Wang, 2005, Comparative study of acetic acid, methanol, and water adsorbed on anatase TiO2 probed by sum frequency generation spectroscopy, J Am Chem Soc, 127, 9736, 10.1021/ja051996m

Li, 2001, Study of Au/Au3+-TiO2 photocatalysts toward visible photooxidation for water and wastewater treatment, Environ Sci Technol, 35, 2381, 10.1021/es001752w

Huang, 2015

Cho, 2009, Precursor effects of citric acid and citrates on ZnO crystal formation, Langmuir, 25, 3825, 10.1021/la804009g

Haddad, 2016, Natural convection of silica–water nanofluids based on experimental measured thermophysical properties: critical analysis, Heat Mass Transf, 52, 1649, 10.1007/s00231-015-1682-4

Drew, 2006

Granstrom, 1998, Laminated fabrication of polymeric photovoltaic diodes, Nature, 395, 257, 10.1038/26183

Yousefi, 2012, An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors, Renew Energy, 39, 293, 10.1016/j.renene.2011.08.056

Kumar, 2011, Performance evaluation of a double pass PV/T solar air heater with and without fins, Appl Therm Eng, 31, 1402, 10.1016/j.applthermaleng.2010.12.037

Mahian, 2014, Entropy generation during Al2O3/water nanofluid flow in a solar collector: effects of tube roughness, nanoparticle size, and different thermophysical models, Int J Heat Mass Transf, 78, 64, 10.1016/j.ijheatmasstransfer.2014.06.051

Li, 2009, Experimental investigation on heat transfer characteristics of magnetic fluid flow around a fine wire under the influence of an external magnetic field, Exp Therm Fluid Sci, 33, 591, 10.1016/j.expthermflusci.2008.12.003

Lajvardi, 2010, Experimental investigation for enhanced ferrofluid heat transfer under magnetic field effect, J Magn Magn Mater, 322, 3508, 10.1016/j.jmmm.2010.06.054

Nkurikiyimfura, 2013, Heat transfer enhancement by magnetic nanofluids—a review, Renew Sustain Energy Rev, 21, 548, 10.1016/j.rser.2012.12.039

Ghofrani, 2013, Experimental investigation on laminar forced convection heat transfer of ferrofluids under an alternating magnetic field, Exp Therm Fluid Sci, 49, 193, 10.1016/j.expthermflusci.2013.04.018

Gang, 2011, A numerical and experimental study on a heat pipe PV/T system, Sol energy, 85, 911, 10.1016/j.solener.2011.02.006

Al-Salaymeh, 2010, Technical and economical assessment of the utilization of photovoltaic systems in residential buildings: the case of Jordan, Energy Convers Manag, 51, 1719, 10.1016/j.enconman.2009.11.026