Experimental investigation of particle suspension injection and permeability impairment in porous media

BM Kevin, F Bertrane, F Fourine, T Cooper, P Quinn, F Coudeville, D Buchan, K Allan, Otter—a challenging marginal oil field development SPE-83975MS. 2003. Farajzadeh, 2004 Barkman, 1972, Measuring water quality and predicting well impairment, J Pet Technol, 24, 10.2118/3543-PA DH Davidson, Invasion and impairment of formations by particulates, Society of Petroleum Engineers, 1979. http://dx.doi.org/10.2118/8210-MS. Sharma, 1987, Transport of particulate suspensions in porous media: Model formulation, AIChE J, 33, 1636, 10.1002/aic.690331007 Al-abduwani, 2003, Formation damage vs. solid particles deposition profile during laboratory-simulated produced-water reinjection, SPE J, 10, 10.2118/82235-PA Wong, 2009, Permeability reduction in Qishn sandstone specimens due to particle suspension injection, Transp Porous Media, 81, 105, 10.1007/s11242-009-9387-0 Sharma, 1997, Injectivity decline in water injection wells: An offshore gulf of Mexico case study, 6 Moghadasi, 2004, Theoretical and experimental study of particle movement and deposition in porous media during water injection, J Pet Sci Eng, 43, 163, 10.1016/j.petrol.2004.01.005 Ochi, 1999, A two-dimensional network model to simulate permeability decrease under hydrodynamic effect of particle release and capture, Transp Porous Media, 37, 303, 10.1023/A:1006690700000 Baghdikian, 1989, Flow of clay suspensions through porous media, SPE Reservoir Eng, 4, 10.2118/16257-PA Li, 2008, Estimation of suspended particle retention rate and permeability damage in sandstone from back analysis of laboratory injection tests Pang, 1997, A model for predicting injectivity decline in water-injection wells, SPE Form Eval, 12, 10.2118/28489-PA R Yerramilli, Water injectivity prediction: Experiments and modeling. Delft University of Technology. Netherlands, 2012. Dupla, 2004, An advanced experimental set-up for studying monodirectional grout injection process, Ground Improv J, 8, 91, 10.1680/grim.2004.8.3.91 Benhamed, 2004, Structure initiale et propriétés de liquéfaction statique d’un sable, C R Acad Sci (Mécanique), 332, 887 Saada, 2006, Evaluation of elementary filtration properties of a cement grout injected in a sand, Can Geotech J, 43, 1273, 10.1139/t06-082 Feia, 2014, Changes in permeability of sand during triaxial loading: effect of fine particles production, Acta Geotech Feia, 2014, Experimental evaluation of the pore-access size distribution of sands, Geotech Test J, 37, 10.1520/GTJ20130126 Oort, 1993, Impairment by suspended solids invasion: Testing and prediction, SPE Prod Facil, 8, 10.2118/23822-PA Eylander, 1988, Suspended solids specifications for water injection from coreflood tests, SPE Reservoir Eng, 3, 10.2118/16256-PA Khatib, 1994, Prediction of formation damage due to suspended solids: Modeling approach of filter cake buildup in injectors, 263 Todd, 1990, The value and analysis of core-based water-quality experiments as related to water injection schemes, SPE Form Eval, 5, 185, 10.2118/17148-PA Benosman, 2011