Experimental investigation of nozzle cavitating flow characteristics for diesel and biodiesel fuels

Badock, C., Wirth, R., Fath, A. and Leipertz, A. (1999). Investigation of cavitation in real size diesel injection nozzles. Int. J. Heat and Fluid Flow, 20, 538–544.

Chaves, H., Knapp, M. and Kubitzek, A. (1996). Experimental study of cavitation in a nozzle hole of diesel injectors using transparent nozzles. SAE Paper No. 962004.

Daikoku, M., Furudate, H., Noda, H. and Inamura, T. (2003). Effect of cavitation in the two-dimensional nozzle on liquid breakup process. Proc. 9th ICLASS 1, 1207.

Ganippa, L. C., Andersson, S. and Chomiak, J. (2000). Transient measurements of discharge coefficients of diesel nozzles. SAE Paper No. 2000-01-2788.

Inamura, T., Saito, H., Daikoku, M., Onodera, T., Sakamoto, H. and Kumakawa, A. (2005) Cavitating flow in rectangular nozzle with orifice. Proc. 10th ILASS-ASIA, 273–280.

Kato, M., Kano, H., Date, K., Oya, T. and Niizuma, K. (1997). Flow analysis in nozzle hole in consideration of cavitation. SAE Paper No. 970052.

Kim, J. H., Kim, H. D., Park, K. A., Matsuo, S. and Setoguchi, T. (2006). A fundamental study of a variable critical nozzle flow. Experiments in Fluids, 40, 127–134.

Koivula, T. S. and Ellman, A. U. (1998). Cavitation behaviour of hydraulic orifices and valves. SAE Paper No. 982038.

Payri, F., Bermudez, V., Rayri, R. and Salvador, F. J. (2004). The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles. Fuel, 83, 419–431.

Payri, R., Garcia, J. M., Salvador, F. J. and Gimeno, J. (2005). Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics. Fuel, 84, 551–561.

Petropoulou, S., Gavaises, M. and Theodorakakos, A. (2006). Adjoint method for controlled caviation inverse nozzle design. Int. J. Automotive Technology 7,3, 283–288.

Soteriou, C., Andrews, R. F and Smith, M. (1999). Further studies of cavitation and atomization in diesel injection. SAE Paper No. 1999-01-1486.

Schmidt, D. P., Rutland, C. J., Corradini, M. L., Roosen, P. and Genge, O. (1999). Cavitation in two-dimensional asymmetric nozzles. SAE Paper No. 1999-01-0518.