Experimental investigation and theoretical analysis of indentations on cuboid hard rock using a conical pick under uniaxial lateral stress
Tóm tắt
Từ khóa
Tài liệu tham khảo
Babadagli T, Develi K (2003) Fractal characteristics of rocks fractured under tension. Theor Appl Fract Mech 39(1):73–88. https://doi.org/10.1016/S0167-8442(02)00139-8
Bakar MZA, Gertsch LS (2013) Evaluation of saturation effects on drag pick cutting of a brittle sandstone from full scale linear cutting tests. Tunn Undergr Space Technol 34:124–134. https://doi.org/10.1016/j.tust.2012.11.009
Balci C, Bilgin N (2007) Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines. Int J Rock Mech Min Sci 44(3):468–476. https://doi.org/10.1016/j.ijrmms.2006.09.001
Bao RH, Zhang LC, Yao QY, Lunn J (2011) Estimating the peak indentation force of the edge chipping of rocks using single point-attack pick. Rock Mech Rock Eng 44(3):339–347. https://doi.org/10.1007/s00603-010-0133-2
Beste U, Jacobson S (2008) A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons. Wear 264(11–12):1129–1141. https://doi.org/10.1016/j.wear.2007.01.030
Bilgin N, Demircin MA, Copur H, Balci C, Tuncdemir H, Akcin N (2006) Dominant rock properties affecting the performance of conical cutters and the comparison of some experimental and theoretical results. Int J Rock Mech Min Sci 43(1):139–156. https://doi.org/10.1016/j.ijrmms.2005.04.009
Bilgin N, Copur H, Balci C (2013) Mechanical excavation in mining and civil industries, CRC Press. Taylor & Francis Group, Boca Raton
. Bilgin N, Tuncdemir H, Balci C, Copur H, Eskikaya S (2000) A model to predict the performance of tunneling machines under stressed conditions, In: Proceedings of the world tunnel congress, Johannesburg, p. 47–53.
Breitrick ME (1998) Using a roadheader for underground gold mining. Mining Eng 50(3):43–46
Cheatham JJ (1958) An analytical study of rock penetration by a single bit tooth, in: Eighth annual drilling and blasting symposium, University of Minnesota, p. 2–4
Copur H, Ozdemir L, Rostami J (1998) Roadheader applications in mining and tunneling. Mining Eng 50(3):38–42
Copur H, Bilgin N, Balci C, Tumac D, Avunduk E (2017) Effects of different cutting patterns and experimental conditions on the performance of a conical drag tool. Rock Mech Rock Eng 50(6):1585–1609. https://doi.org/10.1007/s00603-017-1172-8
Dewangan S, Chattopadhyaya S (2016) Characterization of wear mechanisms in distorted conical picks after coal cutting. Rock Mech Rock Eng 49(1):225–242. https://doi.org/10.1007/s00603-015-0726-x
Dewangan S, Chattopadhyaya S, Hloch S (2015) Wear assessment of conical pick used in coal cutting operation. Rock Mech Rock Eng 48(5):2129–2139. https://doi.org/10.1007/s00603-014-0680-z
Du K, Li XF, Tao M, Wang SF (2020) Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests. Int J Rock Mech Min Sci 133:104411. https://doi.org/10.1016/j.ijrmms.2020.104411
Ergin H, Acaroglu O (2007) The effect of machine design parameters on the stability of a roadheader. Tunn Undergr Space Technol 22(1):80–89. https://doi.org/10.1016/j.tust.2006.04.003
Evans I (1972) Line spacing of picks for effective cutting. Int. J. Rock Mech. Min. Sci. Geomech. Abstr 9(3):355–361. https://doi.org/10.1016/0148-9062(72)90003-4
Evans I (1984) A theory of the cutting force for point-attack picks. Int J Mining Eng 2(1):63–71. https://doi.org/10.1007/BF00880858
Gao KD, Du CL, Jiang HX, Liu S (2014) A theoretical model for predicting the peak cutting force of conical picks. Frattura Ed Integrità Strutturale 8(27):43–52. https://doi.org/10.3221/IGF-ESIS.27.06
Gehring K (1995) Design criteria for TBMs with respect to real rock pressure, In: Proceedings of the tunnel boring machines: trends in design and construction of mechanized tunneling, Hagemberg, p. 43–53.
Ghorbani M, Shahriar K, Sharifzadeh M, Masoudi R (2020) A critical review on the developments of rock support systems in high stress ground conditions. Int J Min Sci Technol 30(5):555–572
Goktan R (1997) A suggested improvement on Evan’s cutting theory for conical bits, In: Gurgenci, H., Hood, M. (Eds.), Proceedings of the fourth international symposium on mine mechanization and automation, Brisbane, Queensland, p. 57–61.
Goktan RM, Gunes N (2005) A semi-empirical approach to cutting force prediction for point-attack picks. J S Afr Inst Min Metall 105(4):257–263
Huang H, Detournay E (2013) Discrete element modeling of tool-rock interaction II: rock indentation. Int J Numer Anal Methods Geomech 37(13):1930–1947. https://doi.org/10.1002/nag.2114
Huang H, Damjanal B, Detournay E (1998) Normal wedge indentation in rocks with lateral confinement. Rock Mech Rock Eng 31(2):81–94. https://doi.org/10.1007/s006030050010
Innaurato N, Oggeri C, Oreste PP, Vinai R (2007) Experimental and numerical studies on rock breaking with TBM tools under high stress confinement. Rock Mech Rock Eng 40(5):429–451. https://doi.org/10.1007/s00603-006-0109-4
Innaurato N, Oggeri C, Oreste P, Vinai R (2011) Laboratory tests to study the influence of rock stress confinement on the performances of TBM discs in tunnels. Int J Miner Metall Mater 18(3):253–259. https://doi.org/10.1007/s12613-011-0431-z
Johnson KL (1987) Contact mechanics. Cambridge University Press, Cambridge
Kindermann P, Schlund P, Sockel HG, Herr M, Heinrich W, Görting K, Schleinkofer U (1999) High-temperature fatigue of cemented carbides under cyclic loads. Int J Refract Met Hard Mat 17(1–3):55–68. https://doi.org/10.1016/S0263-4368(99)00014-1
Larsen-Basse J, Perrott CM, Robinson PM (1974) Abrasive wear of tungsten carbide-cobalt composites I Rotary drilling tests. Mater. Sci. Eng. 13(2):83–91. https://doi.org/10.1016/0025-5416(74)90175-X
Li XB, Zhou J, Wang SF, Liu B (2017) Review and practice of deep mining for solid mineral resources. Chin. J. Nonferr. Met. 27(6):1236–1262. https://doi.org/10.19476/j.ysxb.1004.0609.2017.06.021
Li XB, Gong FQ, Tao M, Dong LJ, Du K, Ma CD, Zhou ZL, Yin TB (2017) Failure mechanism and coupled static-dynamic loading theory in deep hard rock mining: a review. J. Rock Mech. Geotech. Eng. 9(4):767–782. https://doi.org/10.1016/j.jrmge.2017.04.004
Li XF, Wang SB, Ge SR, Malekian R, Li ZX (2017c) Numerical simulation of rock fragmentation during cutting by conical picks under confining stress. C r Mécanique 345(12):890–902. https://doi.org/10.1016/j.crme.2017.09.004
Li XB, Wang SF, Wang SY (2018) Experimental investigation of the influence of confining stress on hard rock fragmentation using a conical pick. Rock Mech Rock Eng 51(1):255–277. https://doi.org/10.1007/s00603-017-1309-9
Li XF, Wang SB, Ge SR, Malekian R, Li ZX, Li YF (2018) A study on drum cutting properties with full-scale experiments and numerical simulations. Measurement 114:25–36. https://doi.org/10.1016/j.measurement.2017.09.006
Li XF, Wang SB, Ge SR, Malekian R, Li ZX (2018c) A theoretical model for estimating the peak cutting force of conical Picks. Exp Mech 58(5):709–720. https://doi.org/10.1007/s11340-017-0372-1
Li XF, Wang SB, Ge SR, Malekian R, Li ZX (2018d) Investigation on the influence mechanism of rock brittleness on rock fragmentation and cutting performance by discrete element method. Measurement 113:120–130. https://doi.org/10.1016/j.measurement.2017.07.043
Liu SY, Liu ZH, Cui XX, Jiang HX (2014) Rock breaking of conical cutter with assistance of front and rear water jet. Tunn Undergr Space Technol 42:78–86. https://doi.org/10.1016/j.tust.2014.02.002
Liu J, Cao P, Han DY (2016) Sequential indentation tests to investigate the influence of confining stress on rock breakage by tunnel boring machine cutter in a biaxial state. Rock Mech Rock Eng 49(4):1479–1495. https://doi.org/10.1007/s00603-015-0843-6
Liu B, Chen L, Li SC, Song J, Xu XJ, Li M, Nie LC (2017) Three-dimensional seismic ahead-prospecting method and application in TBM tunneling. J Geotech Geoenviron Eng 143(12):04017090. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001785
Liu SY, Ji HF, Liu XH, Jiang HX (2017) Experimental research on wear of conical pick interacting with coal-rock. Eng Fail Anal 74:172–187. https://doi.org/10.1016/j.engfailanal.2017.01.013
Liu J, Chen Y, Wan W, Wang J, Fan X (2018) The influence of bedding plane orientation on rock breakages in biaxial states. Theor Appl Fract Mech 95:186–193. https://doi.org/10.1016/j.tafmec.2018.03.005
Ma HS, Yin LJ, Ji HG (2011) Numerical study of the effect of confining stress on rock fragmentation by TBM cutters. Int J Rock Mech Min Sci 48(6):1021–1033. https://doi.org/10.1016/j.ijrmms.2011.05.002
Ma HS, Gong QM, Wang J, Yin LJ, Zhao XB (2016) Study on the influence of confining stress on TBM performance in granite rock by linear cutting test. Tunn Undergr Space Technol 57:145–150. https://doi.org/10.1016/j.tust.2016.02.020
Malkowski P, Niedbalski Z (2020) A comprehensive geomechanical method for the assessment of rockburst hazards in underground mining. Int J Min Sci Technol 30(3):345–355
Nahak S, Dewangan S, Chattopadhyaya S (2015) Discussion on wear phenomenain cemented carbide. Procedia Earth Planet Sci 11:284–293. https://doi.org/10.1016/j.proeps.2015.06.063
Nahak S, Chattopadhyaya S, Dewangan S, Hloch S, Krolczyk G, Legutko S (2017) Microstructural study of failure phenomena in WC 94%-CO 6% hard metal alloy tips of radial picks. Adv. Sci. Technol. Res. J. 11(1):36–47. https://doi.org/10.12913/22998624/68457
Ocak I, Bilgin N (2010) Comparative studies on the performance of a roadheader, impact hammer and drilling and blasting method in the excavation of metro station tunnels in Istanbul. Tunn Undergr Space Technol 25(2):181–187. https://doi.org/10.1016/j.tust.2009.11.002
Pan YC, Liu QS, Liu JP, Liu Q, Kong XX (2018a) Full-scale linear cutting tests in Chongqing Sandstone to study the influence of confining stress on rock cutting efficiency by TBM disc cutter. Tunn Undergr Space Technol 80:197–210. https://doi.org/10.1016/j.tust.2018.06.013
Pan YC, Liu QS, Liu JP, Peng XX, Kong XX (2018b) Full-scale linear cutting tests in chongqing sandstone to study the influence of confining stress on rock cutting forces by TBM disc cutter. Rock Mech Rock Eng 51(6):1697–1713. https://doi.org/10.1007/s00603-018-1412-6
Pang SS, Goldsmith W, Hood M (1989) A force-indentation model for brittle rocks. Rock Mech Rock Eng 22(2):127–148. https://doi.org/10.1007/BF01583958
Qiu JD, Luo L, Li XB, Li DY, Chen Y, Luo Y (2020) Numerical investigation on the tensile fracturing behavior of rock-shotcrete interface based on discrete element method. Int J Min Sci Technol 30(3):293–301
Rojek J, Onate E, Labra C, Kargl H (2011) Discrete element simulation of rock cutting. Int J Rock Mech Min Sci 48(6):996–1010. https://doi.org/10.1016/j.ijrmms.2011.06.003
Roxborough FF,Liu ZC (1995) Theoretical considerations on pick shape in rock and coal cutting. In: Golosinski T.S. (Eds.), Proceedings of the sixth underground operator’s conference, Kalgoorlie, p. 189–193.
Rui FX, Zhao GF (2021) Experimental and numerical investigation of laser-induced rock damage and the implications for laser-assisted rock cutting. Int J Rock Mech Min Sci 139:104653. https://doi.org/10.1016/j.ijrmms.2021.104653
Su O, Akcin NA (2011) Numerical simulation of rock cutting using the discrete element method. Int J Rock Mech Min Sci 48(3):434–442. https://doi.org/10.1016/j.ijrmms.2010.08.012
Tao M, Li ZW, Cao WZ, Li XB, Wu CQ (2019) Stress redistribution of dynamic loading incident with arbitrary waveform through a circular cavity. Int J Numer Anal Methods Geomech 43(6):1279–1299. https://doi.org/10.1002/nag.2897
Tiryaki B, Boland JN, Li XS (2010) Empirical models to predict mean cutting forces on point-attack pick cutters. Int J Rock Mech Min Sci 47(5):858–864. https://doi.org/10.1016/j.ijrmms.2010.04.012
Wang SF, Li XB, Wang SY (2018a) Three-dimensional mineral grade distribution modelling and longwall mining of an underground bauxite seam. Int J Rock Mech Min Sci 103:123–136. https://doi.org/10.1016/j.ijrmms.2018.01.035
Wang SF, Li XB, Du K, Wang SY (2018b) Experimental investigation of hard rock fragmentation using a conical pick on true triaxial test apparatus. Tunn Undergr Space Technol 79:210–223. https://doi.org/10.1016/j.tust.2018.05.006
Wang SF, Li XB, Du K, Wang SY, Tao M (2018c) Experimental study of the triaxial strength properties of hollow cylindrical granite specimens under coupled external and internal confining stresses. Rock Mech Rock Eng 51(7):2015–2031. https://doi.org/10.1007/s00603-018-1452-y
Wang SF, Li XB, Yao JR, Gong FQ, Li X, Du K, Tao M, Huang LQ, Du SL (2019a) Experimental investigation of rock breakage by a conical pick and its application to non-explosive mechanized mining in deep hard rock. Int J Rock Mech Min Sci 122:104063. https://doi.org/10.1016/j.ijrmms.2019.104063
Wang SF, Sun LC, Huang LQ, Li XB, Shi Y, Yao JR, Du SL (2019b) Non-explosive mining and waste utilization for achieving green mining in underground hard rock mine in China. Trans Nonferrous Met Soc China 29(9):1914–1928. https://doi.org/10.1016/S1003-6326(19)65099-5
Wang SF, Huang LQ, Li XB (2020) Analysis of rockburst triggered by hard rock fragmentation using a conical pick under high uniaxial stress. Tunn Undergr Space Technol 96:103195. https://doi.org/10.1016/j.tust.2019.103195
Wang SF, Sun LC, Li XB, Wang SY, Du K, Li X, Feng F (2021) Experimental investigation of cuttability improvement for hard rock fragmentation using conical cutter. Int J Geomech 21(2):06020039. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001899
Wang S, Tang Y, Li X, Du K (2021b) Analyses and predictions of rock cuttabilities under different confining stresses and rock properties based on rock indentation tests by conical pick. Trans Nonferrous Metals Soc China 31(6):1766–1783. https://doi.org/10.1016/S1003-6326(21)65615-7
Wang S, Tang Y, Wang S (2021) Influence of brittleness and confining stress on rockcuttability based on rock indentation tests. J Central South Univ. 28(9):2786–2800. https://doi.org/10.1007/s11771-021-4766-y
Yang DL, Li JP, Wang LP, Gao KD, Tang YH, Wang YX (2015) Experimental and theoretical design for decreasing wear in conical picks in rotation-drilling cutting process. Int J Adv Manuf Technol 77(9–12):1571–1579. https://doi.org/10.1007/s00170-014-6472-5
Yasar S, Yilmaz AO (2017) A novel mobile testing equipment for rock cuttability: assessment: vertical rock cutting rig (VRCR). Rock Mech Rock Eng 50(4):857–869. https://doi.org/10.1007/s00603-016-1149-z
Yasar S, Yilmaz AO (2018) Drag pick cutting tests: a comparison between experimental and theoretical results. J Rock Mech Geotech Eng 10(5):893–906. https://doi.org/10.1016/j.jrmge.2018.02.007
Yin LJ, Gong QM, Ma HS, Zhao J, Zhao XB (2014) Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter. Int J Rock Mech Min Sci 72:261–276. https://doi.org/10.1016/j.ijrmms.2014.07.022
Zhang ZX (2002) An empirical relation between Mode I fracture toughness and the tensile strength of rock. Int J Rock Mech Min Sci 39(3):401–406. https://doi.org/10.1016/S1365-1609(02)00032-1