Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink

Tuckerman, 1981, High-performance heat sinking for VLSI, IEEE Electron. Dev. Lett., EDL-2, 126, 10.1109/EDL.1981.25367

Keyes, 1984, Heat transfer in forced convection through fins, IEEE Trans. Electron Dev., ED-31, 1218, 10.1109/T-ED.1984.21691

Samalam, 1989, Convective heat transfer in microchannels, J. Electron. Mater., 18, 611, 10.1007/BF02657475

Phillips, 1990, Micro-channel heat sinks, vol. 2, 109

Knight, 1991, Optimal thermal design of forced convection heat sinks – analytical, ASME J. Electron. Packaging, 113, 313, 10.1115/1.2905412

Knight, 1992, Heat sink optimization with application to microchannels, IEEE Trans. Components, Hybrids, Manufac. Technol., 15, 832, 10.1109/33.180049

Bejan, 1993, Optimal arrays of pin fins and plate fins in laminar forced convection, ASME J. Heat Transfer, 115, 75, 10.1115/1.2910672

Lee, 1999, Comparative analysis of jet impingement and microchannel cooling for high heat flux applications, Int. J. Heat Mass Transfer, 42, 1555, 10.1016/S0017-9310(98)00265-8

Weisberg, 1992, Analysis of microchannels for integrated cooling, Int. J. Heat Mass Transfer, 35, 2465, 10.1016/0017-9310(92)90089-B

Fedorov, 2000, Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging, Int. J. Heat Mass Transfer, 43, 399, 10.1016/S0017-9310(99)00151-9

Kishimito, 1986, VLSI packaging technique using liquid-cooled channels, IEEE Trans. Components, Hybrids, Manufac. Technol., CHMT-9, 328, 10.1109/TCHMT.1986.1136661

Sasaki, 1986, Optimal structure for microgrooved cooling fin for high-power LSI devices, Electron. Lett., 22, 1332, 10.1049/el:19860916

Nayak, 1987, A high performance thermal module for computer packaging, J. Electron. Mater., 16, 357, 10.1007/BF02657911

Rahman, 1993, Experimental measurements of fluid flow and heat transfer in microchannel cooling passages in a chip substrate, Adv. Electron. Packaging, ASME EEP-4, 495

Rahman, 1993, Design, fabrication, and testing of microchannel heat sinks for aircraft avionics cooling, vol. 1, 1

Ravigururajan, 1996, Single-phase flow thermal performance characteristics of a parallel micro-channel heat exchanger, vol. 7, ASME HTD-329, 157

Harms, 1997, Experimental investigation of heat transfer and pressure drop through deep microchannels in a (100) silicon substarte, HTD-351, 347

Kawano, 1998, Micro channel heat exchanger for cooling electrical equipment, Appl. Heat Transfer Equip., Syst. Educ., ASME HTD-361-3/PID-3, 173

Harms, 1999, Developing convective heat transfer in deep rectangular microchannels, Int. J. Heat Fluid Flow, 20, 149, 10.1016/S0142-727X(98)10055-3

Rahman, 2000, Measurements of heat transfer in microchannel heat sinks, Int. Commun. Heat Mass Transfer, 27, 495, 10.1016/S0735-1933(00)00132-9

Patankar, 1980

Patankar, 1978, A numerical method for conduction in composite materials, flow in irregular geometries and conjugate heat transfer, vol. 3, 297

Todreas, 1990

Incropera, 1996

Shah, 1978