Experimental and numerical studies of the blast-induced overbreak and underbreak in underground roadways

Borrvall, T. (2011). The RHT concrete model in LS-DYNA. 8th European LS-DYNA conference. Strasbourg, France. Chakraborty, 1994, Assessing the effects of joint orientation and rock mass quality on fragmentation and overbreak in tunnel blasting, Tunnelling and Underground Space Technology, 9, 471, 10.1016/0886-7798(94)90106-6 Chen, 2021, Experimental and numerical investigation on overbreak control considering the influence of initial support in tunnels, Tunnelling and Underground Space Technology, 115, 104017, 10.1016/j.tust.2021.104017 Cheng, 2021, A state-of-the-art review of road tunnel subjected to blast loads, Tunnelling and Underground Space Technology, 112, 103911, 10.1016/j.tust.2021.103911 Cheng, 2022, Effects of axial air deck on blast-induced ground vibration, Rock Mechanics and Rock Engineering, 55, 1037, 10.1007/s00603-021-02676-9 Dey, 2012, Prediction of blast-induced overbreak from uncontrolled burn-cut blasting in tunnels driven through medium rock class, Tunnelling and Underground Space Technology, 28, 49, 10.1016/j.tust.2011.09.004 Foderà, 2020, Factors influencing overbreak volumes in drill-and-blast tunnel excavation. A statistical analysis applied to the case study of the Brenner Base Tunnel – BBT, Tunnelling and Underground Space Technology, 105, 103475, 10.1016/j.tust.2020.103475 Ganesan, 2021, Assessment of drilling inaccuracy and delineation of constructional and geological overbreak, Tunnelling and Underground Space Technology, 108, 103730, 10.1016/j.tust.2020.103730 Gong, 2008, Over-excavation forecast of underground opening by using Bayes discriminant analysis method, Journal of Central South University of Technology, 15, 498, 10.1007/s11771-008-0094-8 Hagan, 1982 Han, 2020, FDEM simulation of rock damage evolution induced by contour blasting in the bench of tunnel at deep depth, Tunnelling and Underground Space Technology, 103, 103495, 10.1016/j.tust.2020.103495 Holmberg, R. (1979). Design of tunnel perimeter blasthole patterns to prevent rock damage. In Proceedings of the 2nd International Symposium Tunneling. London, England. Hustrulid, W., & Johnson, J. (2008). A gas pressure-based drift round blast design methodology. In 5th International Conference & Exhibition on Mass Mining. Lulea, Sweden. Ibarra, 1996, Overbreak and underbreak in underground openings Part 2: Causes and implications, Geotechnical & Geological Engineering, 14, 325, 10.1007/BF00421947 Iverson, 2013 Jang, 2013, Optimizing overbreak prediction based on geological parameters comparing multiple regression analysis and artificial neural network, Tunnelling and Underground Space Technology, 38, 161, 10.1016/j.tust.2013.06.003 Kim, 2003, A study on the drilling methods to reduce overbreak in tunnel blasting, Explosives and Blasting, 21, 1 Kim, 2013, Application of the guideline for overbreak control in granitic rock masses in Korean tunnels, Tunnelling and Underground Space Technology, 35, 67, 10.1016/j.tust.2012.11.008 Koopialipoor, 2019, A neuro-genetic predictive model to approximate overbreak induced by drilling and blasting operation in tunnels, Bulletin of Engineering Geology and the Environment, 78, 981, 10.1007/s10064-017-1116-2 Li, 2021, Application of 3D Laser Scanning in Underground Station Cavity Clusters, Advances in Civil Engineering, 2021, 8896363 Liu, 2018, Study on the long-hole raising technique using one blast based on vertical crater retreat multiple deck shots, International Journal of Rock Mechanics and Mining Sciences, 109, 52, 10.1016/j.ijrmms.2018.06.020 Liu, 2019, Study on the raising technique using one blast based on the combination of long-hole presplitting and vertical crater retreat multiple-deck shots, International Journal of Rock Mechanics and Mining Sciences, 113, 41, 10.1016/j.ijrmms.2018.11.012 Lu, 2012, Dynamic response of rock mass induced by the transient release of in-situ stress, International Journal of Rock Mechanics and Mining Sciences, 53, 129, 10.1016/j.ijrmms.2012.05.001 Mahtab, 1997, Assessment of geological overbreak for tunnel design and contractual claims, International Journal of Rock Mechanics and Mining Sciences, 34, 185 Mohammadi, 2015, Use of fuzzy set theory for minimizing overbreak in underground blasting operations – A case study of Alborz Tunnel, Iran, International Journal of Mining Science and Technology, 25, 439, 10.1016/j.ijmst.2015.03.018 Mottahedi, 2018, Overbreak prediction in underground excavations using hybrid ANFIS-PSO model, Tunnelling and Underground Space Technology, 80, 1, 10.1016/j.tust.2018.05.023 Murthy, 2003, Prediction of overbreak in underground tunnel blasting a case study, Journal of Canadian Tunneling Canadien, 109 Pal, 2014, Geological overbreak: A viewpoint of storage cavern excavation, Journal of Rock Mechanics & Tunnelling Technology, 20, 121 Read, 2004, 20 years of excavation response studies at AECL's Underground Research Laboratory, International Journal of Rock Mechanics and Mining Sciences, 41, 1251, 10.1016/j.ijrmms.2004.09.012 Riedel, W., Thoma, K., Hiermaier, S., & Schmolinske, E. (1999). Penetration of reinforced concrete by BETA-B-500 numerical analysis using a new macroscopic concrete model for hydrocodes. In 9th International Symposium, Interaction of the Effects of Munitions with Structures. Berlin, Germany. Rustan, 1998, Micro-sequential contour blasting—how does it influence the surrounding rock mass?, Engineering Geology, 49, 303, 10.1016/S0013-7952(97)00062-8 Saiang, D. (2008). Behaviour of blast-induced damaged zone around underground excavations in hard rock mass [Doctoral dissertation, Luleå University of Technology, Sweden]. Singh, 2005, Causes, impact and control of overbreak in underground excavations, Tunnelling and Underground Space Technology, 20, 63, 10.1016/j.tust.2004.05.004 Verma, 2018, Blast induced rock mass damage around tunnels, Tunnelling and Underground Space Technology, 71, 149, 10.1016/j.tust.2017.08.019 Wang, 2021, Intelligent classification model of surrounding rock of tunnel using drilling and blasting method, Underground Space, 6, 539, 10.1016/j.undsp.2020.10.001 Warneke, J., Dwyer, J., & Orr, T. (2007). Use of a 3-D scanning laser to quantify drift geometry and overbreak due to blast damage in underground manned entries. In 1st Canada-US Rock Mechanics Symposium. Vancouver, Canada. Widodo, 2019, Comparative analysis of ANFO and emulsion application on overbreak and underbreak at blasting development activity in underground Deep Mill Level Zone (DMLZ) PT Freeport Indonesia, IOP Conference Series: Earth and Environmental Science, 279, 012001 Xie, 2019, Damage evolution mechanism in production blasting excavation under different stress fields, Simulation Modelling Practice and Theory, 97, 101969, 10.1016/j.simpat.2019.101969 Yi, 2018, Effects of in-situ stresses on the fracturing of rock by blasting, Computers and Geotechnics, 104, 321, 10.1016/j.compgeo.2017.12.004 Yi, 2021, Numerical modeling for a simulated rockburst experiment using LS-DYNA, Underground Space, 6, 153, 10.1016/j.undsp.2019.11.002 Yi, 2017, A numerical study of the impact of short delays on rock fragmentation, International Journal of Rock Mechanics and Mining Sciences, 100, 250, 10.1016/j.ijrmms.2017.10.026 Zhang, 2020, Laboratory experiment of stemming impact on rock fragmentation by a high explosive, Tunnelling and Underground Space Technology, 97, 103257, 10.1016/j.tust.2019.103257 Zhang, 2021, Experimental study of rock fragmentation under different stemming conditions in model blasting, International Journal of Rock Mechanics and Mining Sciences, 143, 104797, 10.1016/j.ijrmms.2021.104797 Zhu, 2019, Challenges and development prospects of ultra-long and ultra-deep mountain tunnels, Engineering, 5, 384, 10.1016/j.eng.2019.04.009