Experimental and numerical simulation of steel/steel (St/St) interface in bi-layer sheet metal

Lesuer, 1996, Mechanical behaviour of laminated metal composites, Int. Mater. Rev., 41, 169, 10.1179/imr.1996.41.5.169 Smith, 2017, 221 Abbasi, 2010, Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips, J. Mater. Process. Technol., 210, 560, 10.1016/j.jmatprotec.2009.11.003 Al-Ghamdi, 2016, SPIF of Cu/steel clad sheet: annealing effect on bond force and formability, Mater. Manuf. Process., 31, 758, 10.1080/10426914.2015.1048363 Yang, 2011 Jing, 2014, A novel reduction-bonding process to fabricate stainless steel clad plate, J. Alloys Comp., 617, 688, 10.1016/j.jallcom.2014.07.186 Akramifard, 2014, Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: mechanism, microstructure, and mechanical properties, Mater. Sci. Eng. A, 613, 232, 10.1016/j.msea.2014.06.109 Blackman, 2003, The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints, Int. J. Fract., 119, 25, 10.1023/A:1023998013255 Jin, 2005, Cohesive zone modeling of interface fracture in elastic bi-materials, Eng. Fract. Mech., 72, 1805, 10.1016/j.engfracmech.2004.09.011 Andreasson, 2012, Is it possible to open beverage packages virtually? Physical tests in combination with virtual tests in abaqus Mi, 1998, Progressive delamination using interface elements, J. Compos. Mater., 32, 1246, 10.1177/002199839803201401 Schellekens, 1993, A non-linear finite element approach for the analysis of mode-I free edge delamination in composites, Int. J. Solids Struct., 30, 1239, 10.1016/0020-7683(93)90014-X Turon, 2007, An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Eng. Fract. Mech., 74, 1665, 10.1016/j.engfracmech.2006.08.025 Dugdale, 1960, Yielding of steel sheets containing slits, J. Mech. Phys. Solids, 8, 100, 10.1016/0022-5096(60)90013-2 Barenblatt, 1962, The mathematical theory of equilibrium cracks in brittle fracture, Adv. Appl. Mech., 7, 55, 10.1016/S0065-2156(08)70121-2 Ramamurthi, 2013, Delamination characterization of bonded interface in polymer coated steel using surface based cohesive model, Int. J. Precis. Eng. Manuf., 14, 1755, 10.1007/s12541-013-0235-3 Diehl, 2005, 1 Lo Conte, 2016, Computational model for delamination growth at SMA-GFRP interface of hybrid composite, Procedia Struct. Integr., 2, 1538, 10.1016/j.prostr.2016.06.195 Resistance, 2001, Peel resistance of adhesives (T-Peel test), Current, 02, 3 Roylance, 2001, 1 Hoffman, 2008, Influence of processing parameters on the bond toughness of roll-bonded aluminium strip, 58, 959 Diehl, 2008, On using a penalty-based cohesive-zone finite element approach, Part I: elastic solution benchmarks, Int. J. Adhesion Adhes., 28, 237, 10.1016/j.ijadhadh.2007.06.003