Experimental and numerical investigation of open-hole tensile properties and damage mechanisms of 3D woven composites under weft-loading

Lomov, 2009, A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: materials, methods and principal results, Composites Part A, 40, 1134, 10.1016/j.compositesa.2009.03.012 Ansar, 2011, Modeling strategies of 3D woven composites: a review, Compos. Struct., 93, 1947, 10.1016/j.compstruct.2011.03.010 Hallal, 2012, Improved analytical model to predict the effective elastic properties of 2.5D interlock woven fabrics composite, Compos. Struct., 94, 3009, 10.1016/j.compstruct.2012.03.019 Vernet, 2016, Analysis and modeling of 3D Interlock fabric compaction behavior, Compos. Appl. Sci. Manuf., 80, 182, 10.1016/j.compositesa.2015.10.024 Gereke, 2019, A review of numerical models for 3D woven composite reinforcements, Compos. Struct., 209, 60, 10.1016/j.compstruct.2018.10.085 Zheng, 2020, A novel mesoscopic progressive damage model for 3D angle-interlock woven composites, Compos. Sci. Technol., 185, 107894, 10.1016/j.compscitech.2019.107894 Cao, 2019, X-ray tomography and numerical study on low-velocity impact damages of three-dimensional angle-interlock woven composites, Compos. Struct., 230, 111525, 10.1016/j.compstruct.2019.111525 Guo, 2020, Influences of weave parameters on the mechanical behavior and fracture mechanisms of multidirectional angle-interlock 3D woven composites, Mater. Today Commun., 23, 100886, 10.1016/j.mtcomm.2019.100886 Li, 2020, Mechanical properties prediction of 3D angle-interlock woven composites by finite element modeling method, Mater. Today Commun., 22, 100769, 10.1016/j.mtcomm.2019.100769 Sun, 2020, Comparative study on aluminum/GFRP/CFRP tubes for oblique lateral crushing, Thin-Walled Struct., 152, 106420, 10.1016/j.tws.2019.106420 Wu, 2020, Off-axial angle sensitivity of 3D orthogonal woven composite failure behavior subjected to in-plane compressive loading, Thin-Walled Struct., 157, 107149, 10.1016/j.tws.2020.107149 Haeger, 2019, Effect of drilling-induced damage on the open hole flexural fatigue of carbon/epoxy composites, Compos. Struct., 215, 238, 10.1016/j.compstruct.2019.02.025 Khashaba, 2017, Open hole compressive elastic and strength analysis of CFRE composites for aerospace applications, Aero. Sci. Technol., 60, 96, 10.1016/j.ast.2016.10.026 Caminero, 2013, Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation, Compos. B Eng., 53, 76, 10.1016/j.compositesb.2013.04.050 Mounien, 2017, Experimental characterization of the bearing behavior of 3D woven composites, Compos. B Eng., 116, 369, 10.1016/j.compositesb.2016.10.077 Nixon-Pearson, 2013, Damage development in open-hole composite specimens in fatigue. Part 1: experimental investigation, Compos. Struct., 106, 882, 10.1016/j.compstruct.2013.05.033 Azadi, 2019, Tensile loading rate effect on mechanical properties and failure mechanisms in open-hole carbon fiber reinforced polymer composites by acoustic emission approach, Compos. B Eng., 158, 448, 10.1016/j.compositesb.2018.09.103 Green, 2007, An experimental investigation into the tensile strength scaling of notched composites, Composites Part A, 38, 867, 10.1016/j.compositesa.2006.07.008 Erçin, 2013, Size effects on the tensile and compressive failure of notched composite laminates, Compos. Struct., 96, 736, 10.1016/j.compstruct.2012.10.004 Ridha, 2014, Modelling complex progressive failure in notched composite laminates with varying sizes and stacking sequences, Composites Part A, 58, 16, 10.1016/j.compositesa.2013.11.012 Su, 2018, Stress distribution analysis and optimization for composite laminate containing hole of different shapes, Aero. Sci. Technol., 76, 466, 10.1016/j.ast.2018.01.046 Shafighfard, 2019, Design of fiber-reinforced variable-stiffness composites for different open-hole geometries with fiber continuity and curvature constraints, Compos. Struct., 226, 111280, 10.1016/j.compstruct.2019.111280 Liu, 2019, Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: an experimental and numerical study, Compos. Struct., 213, 108, 10.1016/j.compstruct.2019.01.070 Zhou, 2019, Experimental and numerical investigation of open hole carbon fiber composite laminates under compression with three different stacking sequences, J. Mater. Res.Technol., 8, 2957, 10.1016/j.jmrt.2019.05.003 Sun, 2020, Tensile performance of basalt fiber composites with open circular holes and straight notches, IJMS, 176, 105517 Bao, 2016, Progressive failure analysis on scaled open-hole tensile composite laminates, Compos. Struct., 150, 173, 10.1016/j.compstruct.2016.05.017 Higuchi, 2017, Numerical simulation of progressive damage and failure in composite laminates using XFEM/CZM coupled approach, Compos. Appl. Sci. Manuf., 95, 197, 10.1016/j.compositesa.2016.12.026 Rosendahl, 2017, Asymmetric crack onset at open-holes under tensile and in-plane bending loading, IJSS, 113, 10 Sayar, 2018, Clustering effect on damage mechanisms in open-hole laminated carbon/epoxy composite under constant tensile loading rate, using acoustic emission, Compos. Struct., 204, 1, 10.1016/j.compstruct.2018.07.047 Khechai, 2018, Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation, Compos. Struct., 185, 699, 10.1016/j.compstruct.2017.11.060 Zhou, 2017, Progressive damage simulation of open-hole composite laminates under compression based on different failure criteria, J. Compos. Mater., 51, 1239, 10.1177/0021998316659776 Aidi, 2015, Experimental and numerical analysis of notched composites under tension loading, ApCM, 22, 837 Koord, 2020, Investigation of exact analytical solutions for circular notched composite laminates under tensile loading, Compos. Struct., 243, 112180, 10.1016/j.compstruct.2020.112180 Sevenois, 2014, Analytic methods for stress analysis of two-dimensional flat anisotropic plates with notches: an overview, ApMRv, 66 Zitoune, 2011, Behaviour of composite plates with drilled and moulded hole under tensile load, Compos. Struct., 93, 2384, 10.1016/j.compstruct.2011.03.027 Mohammadi, 2017, Correlation of acoustic emission with finite element predicted damages in open-hole tensile laminated composites, Compos. B Eng., 108, 427, 10.1016/j.compositesb.2016.09.101 Almeida, 2020, Improving the open-hole tension characteristics with variable-axial composite laminates: optimization, progressive damage modeling and experimental observations, Compos. Sci. Technol., 185, 107889, 10.1016/j.compscitech.2019.107889 Zhang, 2020, Effect of apertures on tensile property of warp-reinforced 2.5D woven composites notched plates, Compos. Struct., 252, 112693, 10.1016/j.compstruct.2020.112693 Dai, 2016, Multi-scale damage modelling of 3D woven composites under uni-axial tension, Compos. Struct., 142, 298, 10.1016/j.compstruct.2016.01.103 Dai, 2015, Open hole quasi-static and fatigue characterisation of 3D woven composites, Compos. Struct., 131, 765, 10.1016/j.compstruct.2015.06.032 Xu, 2018, X-ray 3D microscopy analysis of fracture mechanisms for 3D orthogonal woven E-glass/epoxy composites with drilled and moulded-in holes, Compos. B Eng., 133, 193, 10.1016/j.compositesb.2017.09.033 Saleh, 2017, Investigating the potential of using off-Axis 3D woven composites in composite joints ' applications, ApCM, 24, 377 Song, 2019, Warp direction fatigue behavior and damage mechanisms of centrally notched 2.5D woven composites at room and elevated temperatures, Compos. Sci. Technol., 182, 107769, 10.1016/j.compscitech.2019.107769 Zhu, 2020, Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension, EnFM, 237, 107221 Guo-dong, 2009, Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension, Compos. Struct., 89, 126, 10.1016/j.compstruct.2008.07.016 He, 2020, A hierarchical multiscale model for the elastic-plastic damage behavior of 3D braided composites at high temperature, Compos. Sci. Technol., 196, 108230, 10.1016/j.compscitech.2020.108230 Lu, 2013, Multi-scale finite element analysis of 2.5D woven fabric composites under on-axis and off-axis tension, Comput. Mater. Sci., 79, 485, 10.1016/j.commatsci.2013.07.003 Bažant, 1983, Crack band theory for fracture of concrete, Matériaux et Construct., 16, 155, 10.1007/BF02486267 Fang, 2011, Investigation on the compressive properties of the three dimensional four-directional braided composites, Compos. Struct., 93, 392, 10.1016/j.compstruct.2010.09.002 He, 2019, A multiscale elasto-plastic damage model for the nonlinear behavior of 3D braided composites, Compos. Sci. Technol., 171, 21, 10.1016/j.compscitech.2018.12.003 Ge, 2018, A coupled elastic-plastic damage model for the mechanical behavior of three-dimensional (3D) braided composites, Compos. Sci. Technol., 157, 86, 10.1016/j.compscitech.2018.01.027