Experimental and numerical investigation of open hole carbon fiber composite laminates under compression with three different stacking sequences

Whitney, 1974, Stress fracture criteria for laminated composites containing stress-concentrations, J Compos Mater, 8, 253, 10.1177/002199837400800303 Dugdale, 1960, Yielding of steel sheets containing slits, J Mech Phys Solids, 8, 100, 10.1016/0022-5096(60)90013-2 Barenblatt, 1962, The mathematical theory of equilibrium cracks in brittle fracture, Adv Appl Mech, 7, 55, 10.1016/S0065-2156(08)70121-2 Soutis, 1991, Failure prediction technique for compressive loaded carbon fibre-epoxy laminate with open holes, J Compos Mater, 25, 1476, 10.1177/002199839102501106 Camanho, 2007, Prediction of size effects in notched laminates using continuum damage mechanics, Compos Sci Technol, 67, 2715, 10.1016/j.compscitech.2007.02.005 Ercin, 2013, Size effects on the tensile and compressive failure of notched composite laminates, Compos Struct, 96, 736, 10.1016/j.compstruct.2012.10.004 Lee, 2007, Numerical characterization of compressive response and damage evolution in laminated plates containing a cutout, Compos Sci Technol, 67, 2221, 10.1016/j.compscitech.2007.01.031 McGregor, 2008, A constitutive model for progressive compressive failure of composites, J Compos Mater, 42, 2687, 10.1177/0021998308096330 Ridha, 2010, Modeling complex progressive failure in notched composite laminates with varying sizes and stacking sequences, Compos Mater, 44, 195 Wisnom, 2010, Scaling effects in notched composites, J Compos Mater, 44, 195, 10.1177/0021998309339865 Zou, 2017, Model I delamination mechanism analysis on CFRP interference-fit during the installation process, Mater Des, 116, 268, 10.1016/j.matdes.2016.11.063 Rots, 2006, Saw-tooth softening/stiffening – a stable computational procedure for RC structures, Comput Concr, 3, 213, 10.12989/cac.2006.3.4.213 Pinho, 2006, Physically based failure modes and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking. Part II: FE implementation, Compos A Appl Sci Manuf, 37, 766, 10.1016/j.compositesa.2005.06.008 Graca-e-Costa, 2012, A non-iterative approach for the modeling of quasi-brittle materials, Int J Fract, 178, 281, 10.1007/s10704-012-9768-1 Catalanotti, 2010, Measurement of resistance curves in the longitudinal failure of composites using digital image correlation, Compos Sci Technol, 70, 1986, 10.1016/j.compscitech.2010.07.022 Laffan, 2011, Translaminar fracture toughness: the critical notch tip radius of 0 degrees plies in CFRP, Compos Sci technol, 72, 97, 10.1016/j.compscitech.2011.10.006 Laffan, 2012, Translaminar fracture toughness testing of composites: a review, Polym Test, 31, 481, 10.1016/j.polymertesting.2012.01.002 Abu Talib, 2013, Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates, Mater Des, 43, 89, 10.1016/j.matdes.2012.06.001 Liu, 2010, Recent developments on damage modeling and finite element analysis for composite laminates: a review, Mater Des, 31, 3825, 10.1016/j.matdes.2010.03.031 Khashaba, 2017, Open hole compressive elastic and strength analysis of CFRE composites for aerospace applications, Aerospace Sci Technol, 60, 96, 10.1016/j.ast.2016.10.026