Experimental and numerical dynamic response of a SDOF vibro-impact system with double gaps and bumpers under harmonic excitation

Kelly JM (1997) Earthquake-resistant design with rubber. Springer, London

Ismail M, Rodellar J, Pozo F (2015) Passive and hybrid mitigation of potential near-fault inner pounding of a self-braking seismic isolator. Soil Dyn Earthq Eng 69:233–250. https://doi.org/10.1016/j.soildyn.2014.10.019

Jangid R, Kelly J (2001) Base isolation for near-fault motions. Earthq Eng Struct Dyn 30:691–707. https://doi.org/10.1002/eqe.31

Murat D, Srikanth B (2007) Equivalent linear analysis of seismic-isolated bridges subjected to near-fault ground motions with forward rupture directivity effect. Eng Struct 29:21–32. https://doi.org/10.1016/j.engstruct.2006.04.004

Basili M, De Angelis M (2007) Optimal passive control of adjacent structures interconnected with nonlinear hysteretic devices. J Sound Vib 301:106–125. https://doi.org/10.1016/j.jsv.2006.09.027

Basili M, De Angelis M (2007) A reduced order model for optimal design of 2-MDOF adjacent structures connected by hysteretic dampers. J Sound Vib 306:297–317. https://doi.org/10.1016/j.jsv.2007.05.012

Reggio A, De Angelis M (2015) Optimal energy-based seismic design of non-conventional Tuned Mass Damper (TMD) implemented via inter-story isolation. Earthq Eng Struct Dyn 44:1623–1642. https://doi.org/10.1002/eqe.2548

Reggio A, De Angelis M (2013) Optimal design of an equipment isolation system with nonlinear hysteretic behavior. Earthq Eng Struct Dyn 42:1907–1930. https://doi.org/10.1002/eqe.2304

Lu LY, Lee TY, Juang SY, Yeh SW (2013) Polynomial friction pendulum isolators (PFPIs) for building floor isolation: an experimental and theoretical study. Eng Struct 56:970–982. https://doi.org/10.1016/j.engstruct.2013.06.016

Reggio A, De Angelis M (2014) Combined primary–secondary system approach to the design of an equipment isolation system with High-Damping Rubber Bearings. J Sound Vib 333:2386–2403. https://doi.org/10.1016/j.jsv.2013.12.006

Renzi E, De Angelis M (2005) Optimal semi-active control and non-linear dynamic response of variable stiffness structures. J Vib Control 11:1253–1289. https://doi.org/10.1177/1077546305054597

Basili M, De Angelis M (2014) Investigation on the optimal properties of semi active control devices with continuous control for equipment isolation. Scalable Comput 15:331–343. https://doi.org/10.12694/scpe.v15i4.1054

Tsai H (1997) Dynamic analysis of base-isolated shear beams bumping against stops. Earthq Eng Struct Dyn 26:515–528. https://doi.org/10.1002/(SICI)1096-9845(199705)26:5%3c515:AID-EQE654%3e3.0.CO;2-C

Malhotra P (1997) Dynamics of seismic impacts in base-isolated buildings. Earthq Eng Struct Dyn 26:797–813. https://doi.org/10.1002/(SICI)1096-9845(199708)26:8%3c797:AID-EQE677%3e3.0.CO;2-6

Komodromos P, Polycarpou PC, Papaloizou L, Phocas MC (2007) Response of seismically isolated buildings considering poundings. Earthq Eng Struct Dyn 36:1605–1622. https://doi.org/10.1002/eqe.692

Komodromos P (2008) Simulation of the earthquake-induced pounding of seismically isolated buildings. Comput Struct 86:618–626. https://doi.org/10.1016/j.compstruc.2007.08.001

Polycarpou PC, Komodromos P (2011) Numerical investigation of potential mitigation measures for poundings of seismically isolated buildings. Earthq Struct 2:1–24. https://doi.org/10.12989/eas.2011.2.1.001

Masroor A, Mosqueda G (2013) Impact model for simulation of base isolated buildings impacting flexible moat walls. Earthq Eng Struct Dyn 42:357–376. https://doi.org/10.1002/eqe.2210

Mavronicola EA, Polycarpou PC, Komodromos P (2016) Effect of planar impact modeling on the pounding response of base-isolated buildings. Front Built Environ 2:1–16. https://doi.org/10.3389/fbuil.2016.00011

Liu C, Yang W, Yan Z, Lu Z, Luo N (2017) Base pounding model and response analysis of base-isolated structures under earthquake excitation. Appl Sci 7:1–16. https://doi.org/10.3390/app7121238

Masroor A, Mosqueda G (2012) Experimental simulation of base-isolated buildings pounding against moat wall and effects on superstructure response. Earthq Eng Struct Dyn 41:2093–2109. https://doi.org/10.1002/eqe.2177

Andreaus U, De Angelis M (2016) Nonlinear dynamic response of a base-excited SDOF oscillator with double-side unilateral constraints. Nonlinear Dyn 84:1447–1467. https://doi.org/10.1007/s11071-015-2581-4

Andreaus U, Baragatti P, De Angelis M, Perno S (2017) A preliminary experimental study about two-sided impacting SDOF oscillator under harmonic excitation. J Comput Nonlinear Dyn 12:061010-1–061010-10. https://doi.org/10.1115/1.4036816

Andreaus U, Baragatti P, De Angelis M, Perno S (2017) Shaking table tests and numerical investigation of two-sided damping constraint for end-stop impact protection. Nonlinear Dyn 90:2387–2421. https://doi.org/10.1007/s11071-017-3810-9

Naeim F, Kelly J (1999) Design of seismic isolated structures: from theory to practice. Wiley, New York

Hunt KH, Crossley FRE (1975) Coefficient of restitution interpreted as damping in vibro-impact. J Appl Mech 42:440–445

Núñez K, Rivas L, Scattolini M, Rosales C, Perera R, Matos M (2007) Mechanical properties of TPVs of EPDM/polypropylene/paraffin oil. Rev Téc Ing Univ Zulia 30:445–453