Experimental Study on Uniaxial Mechanical Properties of Granite Under Thermo-liquid Coupling

Springer Science and Business Media LLC - Tập 50 Số 6 - Trang 935-947 - 2020
Yu, Li1, Yan, Minghui1, Chen, Yanping1, Peng, Haiwang1
1Hebei University, Baoding, China

Tóm tắt

In order to study the uniaxial mechanical properties and failure modes of granite under the condition of thermo-liquid coupling, the granite was subjected to thermo-liquid coupling cyclic treatment at different temperatures, and then its mechanical properties were analyzed by uniaxial compression test. The results reflect the following trends: (1) the stress–strain curve generally undergoes four stages, namely compaction, elastic deformation, yielding, and failure. (2) The peak intensity increases with temperature, decreasing by 11.51% when the temperature is in the range of 50–100 °C and decreasing by 1.77% when the temperature is in the range of 100–150 °C. The peak strain is fit by a linear relationship with the cycle temperature and decreases as the temperature increases. The modulus of elasticity first increases and then decreases with increasing temperature, increasing significantly by approximately 123.21%. (3) The peak intensity varies with the number of cycles and changes slowly before three cycles but changes obviously after three times. The peak intensity is reduced by 19.87% when the number of cycles is 3–4, and it is increased by 22.70% when the number of cycles is 4–5. The peak strain has a cubic fitting relationship with the number of cycles, and it is maximized at three cycles. The modulus of elasticity has a quadratic fit with the number of cycles, and it is minimized at three cycles. (4) In the contour map, the peak intensity is symmetrically distributed in three cycles when the temperature range is 50–100 °C.

Tài liệu tham khảo

citation_journal_title=Chin J Rock Mech Eng; citation_title=Experimental study on dynamic tensile mechanical properties of red sandstone under dry and wet cycles; citation_author=B Du, H Bai, Z Ma, M Li, G Wu; citation_volume=37; citation_issue=7; citation_publication_date=2018; citation_pages=1671-1679; citation_doi=10.13722/j.cnki.jrme.2018.0039; citation_id=CR1 citation_journal_title=Chin J Geotech Eng; citation_title=Study on meso-damage evolution and macroscopic degradation of sandstone under dry-wet cycle; citation_author=Y Fu, Z Wang, X Liu, W Yuan; citation_volume=39; citation_issue=9; citation_publication_date=2017; citation_pages=1653-1661; citation_doi=10.11779/CJGE201709013; citation_id=CR2 citation_journal_title=Rock Soil Mech; citation_title=Neural network simulation of mechanical properties and constitutive model of sandstone under wet and wet cycle; citation_author=K Li, D Zheng, W Huang; citation_volume=34; citation_issue=S2; citation_publication_date=2013; citation_pages=168-173; citation_doi=10.16285/j.rsm.2013.s2.028; citation_id=CR3 citation_journal_title=Chin J Geotech Eng; citation_title=Effects of dry and wet cycles on mechanical properties and microscopic structure of argillaceous sandstones; citation_author=X Liu, D Li, L Zhang; citation_volume=38; citation_issue=7; citation_publication_date=2016; citation_pages=1291-1300; citation_doi=10.11779/CJGE201607017; citation_id=CR4 citation_journal_title=Rock Soil Mech; citation_title=Study on strength and failure criterion of argillaceous sandstone considering dry-wet cycle; citation_author=X Liu, Z Wang, Y Fu, L Zhang, W Yuan; citation_volume=38; citation_issue=12; citation_publication_date=2017; citation_pages=3395-3401; citation_doi=10.16285/j.rsm.2017.12.001; citation_id=CR5 citation_journal_title=Chin Sci Technol Pap; citation_title=Experimental study on the effect of loading rate on mechanical properties of limestone under different temperature conditions; citation_author=X Mao, R Liu, L Zhang; citation_volume=9; citation_issue=5; citation_publication_date=2014; citation_pages=574-577; citation_doi=10.3969/j.issn.2095-2783.2014.05.017; citation_id=CR6 citation_journal_title=Rock Soil Mech; citation_title=Acoustic emission characteristics of sandstone after high temperature under uniaxial compression; citation_author=G Wu, D Wang, S Yan; citation_volume=33; citation_issue=11; citation_publication_date=2012; citation_pages=3237-3242; citation_doi=10.16285/j.rsm.2012.11.006; citation_id=CR7 citation_journal_title=Chin J Rock Mech Eng; citation_title=Experimental study on triaxial compressive strength of coarse sandstone after high temperature; citation_author=C Xu, H Zhou; citation_volume=35; citation_issue=S1; citation_publication_date=2016; citation_pages=2811-2818; citation_id=CR8 citation_journal_title=Rock Soil Mech; citation_title=Experimental study on triaxial compression of granite after high temperature action; citation_author=X Xu, F Gao, Z Zhang; citation_volume=35; citation_issue=11; citation_publication_date=2014; citation_pages=3177-3183; citation_doi=10.16285/j.rsm.2015.08.008; citation_id=CR9 citation_journal_title=Rock Soil Mech; citation_title=Experimental study on the effect of loading rate on granite mechanical properties under real-time high temperature; citation_author=X Xu, F Gao, Z Zhang; citation_volume=36; citation_issue=8; citation_publication_date=2015; citation_pages=2184-2192; citation_doi=10.16285/j.rsm.2015.08.008; citation_id=CR10 citation_journal_title=Chin J Rock Mech Eng; citation_title=Study on mechanical properties of high temperature salt rock under uniaxial compression; citation_author=S Zhai, G Wu, Y Zhang, X Wu; citation_volume=33; citation_issue=1; citation_publication_date=2014; citation_pages=105-111; citation_doi=10.13722/j.cnki.jrme.2014.01.009; citation_id=CR11 citation_journal_title=Rock Soil Mech; citation_title=Study on mechanical effects of loading rate on limestone under high temperature condition; citation_author=L Zhang, X Mao; citation_volume=31; citation_issue=11; citation_publication_date=2010; citation_pages=3511-3515; citation_doi=10.16285/j.rsm.2010.11.026; citation_id=CR12 citation_journal_title=Chin J Rock Mech Eng; citation_title=Experimental study on mechanical properties of granite in high temperature state at 600 °C after cooling with water; citation_author=B Xi, Y Zhao; citation_volume=5; citation_publication_date=2010; citation_pages=892-898; citation_id=CR13 citation_journal_title=J Cent South Univ Sci Technol; citation_title=Study on mechanical and acoustic properties of limestone under high temperature water-cooling; citation_author=Z Huang, Y Zhang, Y Sun; citation_volume=12; citation_publication_date=2016; citation_pages=4181-4189; citation_doi=10.11817/j.issn.1672-7207.2016.12.029; citation_id=CR14 citation_journal_title=Rock Soil Mech; citation_title=Analysis of mechanical and wave characteristics of high temperature marble treated with water cooling; citation_author=Z Huang, Y Zhang, W Wu; citation_volume=2; citation_publication_date=2016; citation_pages=367-375; citation_doi=10.16285/j.rsm.2016.02.008; citation_id=CR15 citation_journal_title=Rock Soil Mech; citation_title=Experimental study on crack propagation of marble after high temperature cycling; citation_author=Y Zeng, G Rong, J Peng, S Sha; citation_volume=S1; citation_publication_date=2018; citation_pages=220-226; citation_doi=10.16285/j.rsm.2017.1922; citation_id=CR16 citation_journal_title=J Hydroelectr Eng; citation_title=Experimental study on uniaxial compression mechanics of marble after different high temperature cycles; citation_author=X Ni, X Li, D Huang; citation_volume=9; citation_publication_date=2016; citation_pages=95-100; citation_doi=10.11660/slfdxb.20160911; citation_id=CR17 Fang, R. (2005). Experimental study and comparison of mechanical properties of marble after high temperature and high temperature cycling. In: Rock Mechanics Committee of China Society of Rock Mechanics and Engineering. Proceedings of 9th Nat. Conf. Rock Dyn. Rock Mechanics Committee of China Society of Rock Mechanics and Engineering: Chinese Society of Rock Mechanics and Engineering, vol 5 Zhu Z, Li D, Jiang Z, Liu J, Yang Y (2009) Quantitative description of the meso-structure of surrounding rock of deep tunnel under temperature cycling. Rock Soil Mech 11:3237–3241+3248. https://doi.org/10.16285/j.rsm.2009.11.027 citation_journal_title=Chin J Geotech Eng; citation_title=Study on mechanical properties of basalt under cyclic uniaxial stress and cyclic temperature; citation_author=C Xia, S Zhou, Y Hu; citation_volume=6; citation_publication_date=2015; citation_pages=1016-1024; citation_doi=10.11779/CJGE201506007; citation_id=CR20 citation_journal_title=J Eng Geol; citation_title=Study on the deterioration law of mechanical parameters of altered rock after temperature cycling; citation_author=Y Zhang; citation_volume=2; citation_publication_date=2017; citation_pages=410-415; citation_doi=10.13544/j.cnki.jeg.2017.02.019; citation_id=CR21 citation_journal_title=Sci Technol Eng; citation_title=Influence of temperature cycling on physical and mechanical properties of rocks; citation_author=X Ming, C Fan; citation_volume=13; citation_publication_date=2017; citation_pages=261-265; citation_doi=10.3969/j.issn.1671-1815.2017.13.048; citation_id=CR22