Experimental Investigation of Aluminum Alloy and Steel Core Buckling Restrained Braces (BRBs)

AISC. (2001). Load and resistance factor design specification for structural steel buildings. Chicago, IL: American Institute of Steel Construction.

AISC, SEAOC. (2001). Recommended provisions for buckling-restrained braced frames. USA: American Institute of Steel Construction/Structural Engineers Association of California.

ANSI, AISC 341–10. (2010). Seismic provisions for structural steel buildings. Chicago, IL: American Institute of Steel Construction.

ANSI, AISC 360–10. (2010). Specification for structural steel buildings. Chicago, IL: American Institute of Steel Construction.

ASTM A 370-08a. (2008). Standard test methods and definitions for mechanical testing of steel products. Philadelphia, PA: American Society for Testing and Materials.

ASTM E8, E8 M-09. (2009). Standard test methods for tension testing of metallic material. Philadelphia, PA: American Society for Testing and Materials.

Avci-Karatas, C. (2013). Design, fabrication, and cyclic behavior of steel and aluminum alloy core buckling restrained braces (BRBs). PhD dissertation, Istanbul Technical University (ITU), Istanbul, Turkey.

Bash, V. Y., & Shkaraputa, L. M. (1988). Stability with time of the strain hardening effect of constructional materials. Strength of Materials, 20(3), 358–362.

Beer, F. P., Johnston, E. R., Dewolf, J. T., & Mazurek, D. F. (2009). Mechanics of materials (6th ed.). New York: McGraw-Hill Companies.

Berman, J. W., & Bruneau, M. (2009). Cyclic testing of a buckling restrained braced frame with unconstrained gusset connections. ASCE Journal of Structural Engineering, 135(12), 1499–1510.

Campbell, F. C. (2008). Elements of metallurgy and engineering alloys (Vol. 1). Ohio: ASM International Book Co.

Celik, O. C., & Bruneau, M. (2009). Seismic behavior of bidirectional-resistant ductile end diaphragms with buckling restrained braces in straight steel bridges. Engineering Structures, 31(2), 380–393.

Celik, O. C., & Bruneau, M. (2011). Skewed slab-on-girder steel bridge superstructures with bidirectional-ductile end diaphragms. ASCE Journal of Bridge Engineering, 16(2), 207–218.

Celik, O. C., Yuksel, E., Avci-Karatas, C., Bal, A., Gokce, T., Bago, Z., et al. (2015). Component testing of steel-core buckling restrained braces (BRBs) with pinned end connections. In Proceedings of the 8th ınternational conference advances in steel structures, Lisbon, Portugal.

Chopra, A. K. (2001). Dynamics of structures: Theory and Applications of earthquake engineering (2nd ed.). Upper Saddle River, New Jersey: Prentice-Hall.

Chou, C. C., Chung, P. T., & Cheng, Y. T. (2015). Experimental evaluation of large-scale dual-core self-centering braces and sandwiched buckling-restrained braces. Engineering Structures, 116, 12–25.

Christopoulos, C., & Filiatrault, A. (2006). Principles of passive supplemental damping and seismic isolation (1st ed.). Pavia: IUSS Press.

CSI SAP 2000. (2009). User’s manual, version 14. Berkeley: Computer and Structures Inc.

Di Sarno, L., & Elnashai, A. S. (2009). Bracing systems for seismic retrofitting of steel frames. Journal of Constructional Steel Research, 65(2), 452–465.

Di Sarno, L., & Manfredi, G. (2010). Seismic retrofitting with buckling restrained braces: Application to an existing non-ductile RC framed building. Soil Dynamics and Earthquake Engineering, 30(11), 1279–1297.

Di Sarno, L., & Manfredi, G. (2012). Experimental tests on full-scale RC unretrofitted frame and retrofitted with buckling-restrained braces. Earthquake Engineering and Structural Dynamics, 41(2), 315–333.

Dindar, A. A. (2009). Energy-based earthquake response analysis and design of reinforced concrete SDOF columns. Ph.D. dissertation, Bogazici University, Istanbul, Turkey.

EN 15129. (2010). Anti-seismic devices. European committee for standardization.

Fahnestock, L. A., Sause, R., Ricles, J. M., & Lu, L. W. (2003). Ductility demands on buckling-restrained braced frames under earthquake loading. Earthquake Engineering and Engineering Vibration, 2(2), 255–268.

FEMA 356. (2000). Pre-standard and commentary for the seismic rehabilitation of buildings. Washington, DC: Federal Emergency Management Agency.

Fujishita, K., Bal, A., Sutcu, F., Celik, O. C., Takeuchi, T., Matsui, R., & Terashima, M. (2015). Comparing hysteretic behavior of buckling restrained braces (BRBs) with bolted and welded end connections. In Proceedings of the 8th ınternational symposium on steel structures (ISSS), Jeju, Korea.

Haydaroglu, C., Taskin, K., & Celik, O. C. (2011). Ductility enhancement of round HSS braces using CFRP sheet wraps. In Proceedings of the 6th European conference on steel and composite structures (Eurosteel), Budapest, Hungary.

Kissell, J. R., & Ferry, R. L. (2002). Aluminum Structures-A guide to their specifications and design (2nd ed.). New York: Willey.

Lopez, W. A., & Sabelli, R. (2004). Seismic design of buckling-restrained braced frames. In Steel tips, Structural Steel Educational Council, Moraga, CA, USA.

Merritt, S., Uang, C. M., & Benzoni, G. (2003). Subassemblage testing of star seismic buckling-restrained braces. In Rep. TR-2003/04, Dept. of Structural Engineering, Univ. of California, La Jolla, CA, USA.

Nakamura, H., Maeda, Y., Sasaki, T., Wada, A., Takeuchi, T., Nakata, Y., et. al. (2000). Fatigue properties of practical-scale unbonded braces. In Nippon Steel Technical Report, 82, July (pp. 51–57).

Pandikkadavath, M. S., & Sahoo, D. R. (2016). Analytical investigation on cyclic response of buckling-restrained braces with short yielding core segments. International Journal of Steel Struct, 16(4), 1273–1285.

Sabelli, R., Mahin, S., & Chang, C. (2003). Seismic demands on steel braced frame buildings with buckling-restrained braces. Engineering Structures, 25(5), 655–666.

Sahoo, D. R., Singhal, T., Taraithia, S. S., & Saini, A. (2015). Cyclic behavior of shear-and-flexural yielding metallic dampers. Journal of Constructional Steel Research, 114, 247–257.

Stephens, R. I., Ali, F., Stephens, R. R., & Fuchs, H. O. (2001). Metal fatigue in engineering (2nd ed.). New York: Willey.

Sutcu, F., Takeuchi, T., & Matsui, R. (2014). Seismic retrofit design method for RC buildings using buckling-restrained braces and steel frames. Journal of Constructional Steel Research, 101(10), 304–313.

Symans, M. D., Charney, F. A., Whittaker, A. S., Constantinou, M. C., Kircher, C. A., Johnson, M. W., et al. (2008). Energy dissipation systems for seismic applications: Current practice and recent developments. Journal of Structural Engineering, 134(1), 3–21.

Takeuchi, T., Hajjar, J. F., Matsui, R., Nishimoto, K., & Aiken, I. D. (2012). Effect of local buckling core plate restraint in buckling-restrained braces. Engineering Structures, 44(11), 304–311.

Takeuchi, T., Ida, M., Yamada, S., & Suzuki, K. (2008). Estimation of cumulative deformation capacity of buckling-restrained braces. ASCE Journal of Structural Engineering, 134(5), 822–831.

Takeuchi, T., Nakamura, H., Kimura, I., Hasegawa, H., Saeki, E., & Watanabe, A. (2000). Buckling restrained braces and damping steel structures. U.S. Patent 6 826 874, Dec. 12.

Takeuchi, T., Ozaki, H., Matsui, R., & Sutcu, F. (2014). Out-of-plane stability of buckling-restrained braces including moment transfer capacity. Earthquake Engineering and Structural Dynamics, 43(6), 851–869.

Tremblay, R., Bolduc, P., Neville, R., & DeVall, R. (2006). Seismic testing and performance of buckling-restrained bracing systems. Canadian Journal of Civil Engineering, 33(2), 183–198.

Tsai, K. C., Lai, J. W., Hwang, Y. C., Lin, S. L., & Weng, C. H. (2004). Research and applications of double-cored buckling restrained braces. In Proceedings of the 13th world conference on earthquake engineering, Vancouver, BC, Canada.

Usami, T., Ge, H. B., & Kasai, A. (2008). Overall buckling prevention condition of buckling-restrained braces as a structural control damper. In Proceedings of the 14th world conference on earthquake engineering, Beijing, China.

Usami, T., Ge, H., & Luo, X. Q. (2009). Experimental and analytical study on high-performance buckling-restrained brace dampers for bridge engineering. In Proceedings of the 3rd ınternational conference on AESE, San Francisco, California, USA.

Usami, T., Wang, C. L., & Funayama, J. (2011). Low-cycle fatigue tests of a type of buckling restrained braces. In Proceedings of the 12th East Asia-Pacific conference on structural engineering and construction, Hong Kong, China.

Usami, T., Wang, C. L., & Funayama, J. (2012). Developing high-performance aluminum alloy buckling-restrained braces based on series of low-cycle fatigue tests. Earthquake Engineering and Structural Dynamics, 41(4), 643–661.

Vargas, R. E., & Bruneau, M. (2006). Experimental investigation of the structural fuse concept. Rep. MCEER-06-0005, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, NY, USA.

Vargas, R., & Bruneau, M. (2009a). Experimental response of buildings designed with metallic structural fuses. ASCE Journal of Structural Engineering, 135(4), 394–403.

Vargas, R., & Bruneau, M. (2009b). Analytical response and design of buildings with metallic structural fuses. ASCE Journal of Structural Engineering, 135(4), 386–393.

Wang, C. L., Usami, T., Funayama, J., & Imase, F. (2013). Low-cycle fatigue testing of extruded aluminium alloy buckling-restrained braces. Engineering Structures, 46(1), 294–301.

Watanabe, A., Hitomi, Y., Yaeki, E., Wada, A., & Fujimoto, M. (1988). Properties of brace encased in buckling-restraining concrete and steel tube. In Proceedings of the 9th world conference on earthquake engineering, Tokyo-Kyoto, Japan, pp. 719–724.

Zhao, J., Wu, B., & Ou, J. (2012). Effect of brace end rotation on the global buckling behavior of pin-connected buckling-restrained braces with end collars. Engineering Structures, 40(7), 240–253.