Existing building retrofits: Methodology and state-of-the-art

Asadi, 2012, Multi-objective optimization for building retrofit strategies: a model and an application, Energy and Buildings, 41, 81, 10.1016/j.enbuild.2011.10.016

DOE, 2010

Australia OEH, New South Wales of the Environment, 2009, http://www.environment.nsw.gov.au/soe/soe2009/index.htm (accessed on 23.11.11).

Annex 50, Prefabricated systems for low energy renovation of residential buildings, http://www.ecbcs.org/annexes/annex50.htm (accessed on 25.11.11).

Barlow, 2007, Occupant comfort in UK offices – how adaptive comfort theories might influence future low energy office refurbishment strategies, Energy and Buildings, 39, 837, 10.1016/j.enbuild.2007.02.002

Roberts, 2008, Altering existing buildings in the UK, Energy Policy, 36, 4482, 10.1016/j.enpol.2008.09.023

ACC, 2007

DOE, DOE to fund up to $454 million for retrofit ramp-ups in energy efficiency, http://energy.gov/articles/doe-fund-454-million-retrofit-ramp-ups-energy-efficiency (accessed on 03.01.12).

HUD/U.S., http://portal.hud.gov/hudportal/HUD (accessed on 03.01.12).

DOCC&EE, Commercial buildings in Australia, Department of Climate Change and Energy Efficiency, Australian Government, http://www.climatechange.gov.au/what-you-need-to-know/buildings/commercial.aspx (accessed on 12.12.11).

Queensland Government, ClimateQ: Toward a Greener Queensland: Improving Energy Efficiency in Existing Government Buildings, http://www.climatechange.qld.gov.au/pdf/factsheets/8govlship-b1.pdf (accessed on 10.01.12).

DECC, Warmer homes, greener homes: a strategy for household energy management, UK Department of Energy and Climate Change, http://www.decc.gov.uk/ (accessed on 10.01.12).

IEA, http://www.ecbcs.org/ (accessed on 10.12.11).

Flourentzou, 2002, Elaboration of retrofit scenarios, Energy and Buildings, 34, 185, 10.1016/S0378-7788(01)00106-2

Ma, 2009, Building energy research in Hong Kong: a review, Renewable and Sustainable Energy Reviews, 13, 1870, 10.1016/j.rser.2009.01.006

Ma, 2011, Enhancing the performance of large primary-secondary chilled water systems by using bypass check valve, Energy, 36, 268, 10.1016/j.energy.2010.10.042

Ardente, 2011, Energy and environmental benefits in public buildings as a result of retrofit actions, Renewable and Sustainable Energy Reviews, 15, 460, 10.1016/j.rser.2010.09.022

Chidiac, 2011, Effectiveness of single and multiple energy retrofit measures on the energy consumption of office buildings, Energy, 36, 5037, 10.1016/j.energy.2011.05.050

Chidiac, 2011, A screening methodology for implementing cost effective energy retrofit measures in Canadian office buildings, Energy and Buildings, 43, 614, 10.1016/j.enbuild.2010.11.002

Hestnes, 2002, Effective retrofitting scenarios for energy efficiency and comfort: results of the design and evaluation activities within the OFFICE project, Building and Environment, 37, 569, 10.1016/S0360-1323(02)00003-3

Golić, 2011, General model of solar water heating system integration in residential building refurbishment – potential energy savings and environmental impact, Renewable and Sustainable Energy Reviews, 15, 1533, 10.1016/j.rser.2010.11.052

Mahlia, 2011, Life cycle cost analysis and payback period of lighting retrofit at the University of Malaya, Renewable and Sustainable Energy Reviews, 15, 1125, 10.1016/j.rser.2010.10.014

Xing, 2011, Zero carbon buildings refurbishment – a hierarchical pathway, Renewable and Sustainable Energy Reviews, 15, 3229, 10.1016/j.rser.2011.04.020

Tobias, 2009

Climate Works Australia, 2010

Ernst, Young, Business opportunities in a low carbon economy, Final report, Industry and Investment NSW, 17.09.10.

Sweatman, 2010

AEPCA, 2004

EVO, 2007, vol. I

Baek, 2012, Changes in renovation policies in the era of sustainability, Energy and Buildings, 47, 485, 10.1016/j.enbuild.2011.12.028

Harris, 2000, Investment in energy efficiency: a survey of Australian firms, Energy Policy, 28, 867, 10.1016/S0301-4215(00)00075-6

Alajmi, 2012, Energy audit of an educational building in a hot summer climate, Energy and Buildings, 47, 122, 10.1016/j.enbuild.2011.11.033

CIBSE, 2004

Owens, 1988, Household energy behaviour in Nordic countries – an unrealized energy saving potential, Energy, 13, 853, 10.1016/0360-5442(88)90050-3

Yohanis, 2012, Domestic energy use and householders’ energy behaviour, Energy Policy, 41, 654, 10.1016/j.enpol.2011.11.028

Santin, 2009, The effect of occupancy and building characteristics on energy use for space and water heating in Dutch residential stock, Energy and Buildings, 41, 1223, 10.1016/j.enbuild.2009.07.002

Rysanek, 2012, A decoupled whole-building simulation engine for rapid exhaustive search of low-carbon and low-energy building refurbishment options, Building and Environment, 50, 21, 10.1016/j.buildenv.2011.09.024

Diakaki, 2008, Towards a multi-objective optimization approach for improving energy efficiency in buildings, Energy and Buildings, 40, 1747, 10.1016/j.enbuild.2008.03.002

Wang, 2008, Supervisory and optimal control of building HVAC systems: a review, HVAC&R Research, 14, 3, 10.1080/10789669.2008.10390991

Standards Australia, 2000

ASHRAE, 2011

Xu, 2011, Success factors of energy performance contracting (EPC) for sustainable building energy efficiency retrofit (BEER) of hotel buildings in China, Energy Policy, 39, 7389, 10.1016/j.enpol.2011.09.001

Jaggs, 2000, Energy performance indoor environmental quality retrofit – a European diagnosis and decision making method for building refurbishment, Energy and Buildings, 31, 97, 10.1016/S0378-7788(99)00023-7

Lee, 2000, Verification of electrical energy savings for lighting retrofits using short- and long-term monitoring, Energy Conversion and Management, 41, 1999, 10.1016/S0196-8904(00)00037-6

Santamouris, 2002, Passive retrofitting of office buildings to improve their energy performance and indoor environment: the OFFICE project, Building and Environment, 37, 575, 10.1016/S0360-1323(02)00004-5

Ascione, 2011, Energy retrofit of historical buildings: theoretical and experimental investigations for the modelling of reliable performance scenarios, Energy and Buildings, 43, 1925, 10.1016/j.enbuild.2011.03.040

Heo, 2012, Calibration of building energy models for retrofit analysis under uncertainty, Energy and Buildings, 47, 550, 10.1016/j.enbuild.2011.12.029

Ma, 2011, Online fault detection and robust control of condenser cooling water systems in building central chiller plants, Energy and Buildings, 43, 153, 10.1016/j.enbuild.2010.09.003

K.W. Roth, D. Westphalen, M.Y. Feng, P. Llana, L. Quartararo, Energy impact of commercial building controls and performance diagnostics: market characterization, energy impact of building faults and energy savings potential, Final Report, TIAX LCC, Cambridge, MA, 2005.

Chau, 2000, Assessing the cost effectiveness of an environmental assessment scheme, Building and Environment, 35, 307, 10.1016/S0360-1323(99)00024-4

Haapio, 2008, A critical review of building environmental assessment tools, Environmental Impact Assessment Review, 28, 469, 10.1016/j.eiar.2008.01.002

Reed, 2009, International comparison of sustainable rating tools, Journal of Sustainable Real Estate, 1, 1, 10.1080/10835547.2009.12091787

Richalet, 2001, HELP (house energy labeling procedure): methodology and present results, Energy and Buildings, 33, 229, 10.1016/S0378-7788(00)00086-4

Poel, 2007, Energy performance assessment of existing dwellings, Energy and Buildings, 39, 393, 10.1016/j.enbuild.2006.08.008

Mejri, 2011, Energy performance assessment of occupied buildings using model identification techniques, Energy and Buildings, 43, 285, 10.1016/j.enbuild.2010.09.010

Dascalaki, 2011, Building typologies as a tool for assessing the energy performance of residential buildings – a case study for the Hellenic building stock, Energy and Buildings, 43, 3400, 10.1016/j.enbuild.2011.09.002

Song, 2008, A development of easy-to-use tool for fault detection and diagnosis in building air-conditioning systems, Energy and Buildings, 40, 71, 10.1016/j.enbuild.2007.01.011

Caccavelli, 2002, TOBUS – a European diagnosis and decision-making tool for office building upgrading, Energy and Buildings, 34, 113, 10.1016/S0378-7788(01)00100-1

House, 1999, An overview of building diagnostics

Santamouris, 2007, Investigating and analysing the energy and environmental performance of an experimental green roof system installed in a nursery school building in Athens, Greece, Energy, 32, 1781, 10.1016/j.energy.2006.11.011

Zmeureanu, 1990, Assessment of the energy savings due to the building retrofit, Building and Environment, 25, 95, 10.1016/0360-1323(90)90020-R

Crawley, 2008, Contrasting the capabilities of building energy performance simulation programs, Building and Environment, 43, 661, 10.1016/j.buildenv.2006.10.027

Murray, 2012, Static Simulation A sufficient modelling technique for retrofit analysis, Energy and Buildings, 47, 113, 10.1016/j.enbuild.2011.11.034

Yalcintas, 2008, Energy-savings predictions for building-equipment retrofits, Energy and Buildings, 40, 2111, 10.1016/j.enbuild.2008.06.008

Raftery, 2011, Calibrating whole building energy models: an evidence-based methodology, Energy and Buildings, 43, 2356, 10.1016/j.enbuild.2011.05.020

Kreith, 2008

Krarti, 2011

Remer, 1995, A compendium and comparison of 25 project evaluation techniques. Part 1. Net present value and rate of return methods, International Journal of Production Economics, 42, 79, 10.1016/0925-5273(95)00104-2

Verbeeck, 2005, Energy savings in retrofitted dwellings: economically viable, Energy and Buildings, 37, 747, 10.1016/j.enbuild.2004.10.003

Kaynakli, 2012, A review of the economical and optimum thermal insulation thickness for building applications, Renewable and Sustainable Energy Reviews, 16, 415, 10.1016/j.rser.2011.08.006

Peterson, 2012, Method for component-based economical optimisation for use in design of new low–energy buildings, Renewable Energy, 38, 173, 10.1016/j.renene.2011.07.019

Nikolaidis, 2009, Economic evaluation of energy saving measures in a common type of Greek building, Applied Energy, 86, 2550, 10.1016/j.apenergy.2009.04.029

Huber, 2011, Refurbishing residential buildings: a socio-economic analysis of retrofitting projects in five European countries

Menassa, 2011, Evaluating sustainable retrofits in existing buildings under uncertainty, Energy and Buildings, 43, 3576, 10.1016/j.enbuild.2011.09.030

Gustafsson, 1998, Sensitivity analysis of building energy retrofits, Applied Energy, 61, 13, 10.1016/S0306-2619(98)00032-4

Mozzo, 1999, Measurement and verification of savings in performance contracting, Energy Engineering, 96, 33, 10.1080/01998595.1999.10530455

Roosa, 2002, Measurement & verification applications: Option A case studies, Energy Engineering, 99, 57, 10.1092/61C4-86KX-9JFQ-AXL4

Kromer, 2000, Measurement and verification protocols – M&V meets the competitive and environmental marketplaces, Proceedings of the ACEEE Summer Study on Energy Efficiency in Buildings, 4, 4227

Erpelding, 2008, Monitoring chiller plant performance, ASHRAE Journal, 4, 48

Baker, 2009

2010

Guo, 1993, An artificial intelligence tool for lighting energy-efficiency upgrade, Energy and Buildings, 20, 115, 10.1016/0378-7788(93)90002-C

Dascalaki, 2002, On the potential of retrofitting scenarios for offices, Building and Environment, 37, 557, 10.1016/S0360-1323(02)00002-1

Rey, 2004, Office building retrofitting strategies: multicriteria approach of an architectural and technical issue, Energy and Buildings, 36, 367, 10.1016/j.enbuild.2004.01.015

Olgyay, 2010, Whole-building retrofits: a gateway to climate stabilization, ASHRAE Transactions, 116, 244

Fluhrer, 2010, Achieving radically energy efficient retrofits: The Empire State Building example, ASHRAE Transactions, 116, 236

Cooperman, 2011, Commercial envelopes, ASHRAE Journal, 53, 134

Roulet, 2002, ORME. A multicriteria rating methodology for buildings, Building and Environment, 37, 579, 10.1016/S0360-1323(02)00005-7

Arup, 2008

Flourentzou, 2002, TOBUS software – an interactive decision aid tool for building retrofit studies, Energy and Buildings, 34, 193, 10.1016/S0378-7788(01)00108-6

Juan, 2010, A hybrid decision support system for sustainable office building renovation and energy performance improvement, Energy and Buildings, 42, 290, 10.1016/j.enbuild.2009.09.006

Doukas, 2009, Assessing energy-saving measures in buildings through an intelligent decision support model, Building and Environment, 44, 290, 10.1016/j.buildenv.2008.03.006

Goldman, 1988, Retrofit experience in U.S. multifamily buildings: energy savings, costs, and economics, Energy, 13, 797, 10.1016/0360-5442(88)90085-0

Cohen, 1991, Energy savings and economics of retrofitting single-family buildings, Energy and Buildings, 17, 297, 10.1016/0378-7788(91)90012-R

Gustafsson, 1997, Optimal heating-system retrofits in residential buildings, Energy, 22, 867, 10.1016/S0360-5442(97)00023-6

Gustafsson, 2001, Optimal fenestration retrofits by use of MILP programming technique, Energy and Buildings, 33, 843, 10.1016/S0378-7788(01)00065-2

Al-Ragom, 2003, Retrofitting residential buildings in hot and arid climates, Energy Conversion and Management, 44, 2309, 10.1016/S0196-8904(02)00256-X

Hens, 2010, Energy efficient retrofit of an end of the row house: confronting predictions with long-term measurements, Energy and Buildings, 42, 1939, 10.1016/j.enbuild.2010.05.030

Bin, 2012, Measuring buildings for sustainability: comparing the initial and retrofit ecological footprint of a century home – the REEP house, Applied Energy, 93, 24, 10.1016/j.apenergy.2011.05.055

Alanne, 2004, Selection of renovation actions using multi-criteria knapsack model, Automation in Construction, 13, 377, 10.1016/j.autcon.2003.12.004

Gorgolewski, 1995, Optimizing renovation strategies for energy conservation in housing, Building and Environment, 30, 583, 10.1016/0360-1323(95)00011-T

Goodacre, 2002, Integrating energy efficiency with the social agenda in sustainability, Energy and Buildings, 34, 53, 10.1016/S0378-7788(01)00077-9

Mahlia, 2005, Cost-benefit analysis and emission reduction of lighting retrofits in residential sector, Energy and Buildings, 37, 573, 10.1016/j.enbuild.2004.08.009

Dodoo, 2010, Life cycle primary energy implication of retrofitting a wood-framed apartment building to passive house standard, Resources, Conservation and Recycling, 54, 1152, 10.1016/j.resconrec.2010.03.010

Zavadskas, 2008, The selection of effective retrofit scenarios for panel houses in urban neighborhoods based on expected energy savings and increase in market value: the Vilnius case, Energy and Buildings, 40, 573, 10.1016/j.enbuild.2007.04.015

Zhao, 2009, Check and evaluation system on heat metering and energy efficiency retrofit of existing residential buildings in northern heating areas of china based on multi-index comprehensive evaluation method, Energy Policy, 37, 2124, 10.1016/j.enpol.2008.11.044

Stovall, 2007, An exploration of wall retrofit best practices

Nabinger, 2011, Impacts of airtightening retrofits on ventilation rates and energy consumption in a manufactured home, Energy and Buildings, 43, 3059, 10.1016/j.enbuild.2011.07.027

Boait, 2011, Performance and control of domestic ground-source heat pumps in retrofit installations, Energy and Buildings, 43, 1968, 10.1016/j.enbuild.2011.04.003

Stefano, 2000, Energy efficiency and the environment: the potential for energy efficient lighting to save energy and reduce carbon dioxide emissions at Melbourne University, Australia, Energy, 25, 823, 10.1016/S0360-5442(00)00015-3

Bastianini, 2005, Retrofit and monitoring of an historical building using Smart CFRP with embedded fibre optic Brillouin sensors, Construction and Building Materials, 19, 525, 10.1016/j.conbuildmat.2005.01.004

Fonseca, 2006, An expert system for lighting energy management in public school facilities, Expert Systems, 23, 194, 10.1111/j.1468-0394.2006.00401.x

Gatton, 1996, Expert system to determine energy-saving retrofit potential of public buildings, Fuel and Energy Abstracts, 37, 378, 10.1016/0140-6701(96)80096-8

Kaklauskas, 2005, Multivariant design and multiple criteria analysis of building refurbishments, Energy and Buildings, 37, 361, 10.1016/j.enbuild.2004.07.005