Exergoeconomic and exergoenvironmental analyses of a promising alumina extraction process from secondary aluminum dross in China

Tan, 2005, An LCA study of a primary aluminum supply chain, J. Clean. Prod., 13, 607, 10.1016/j.jclepro.2003.12.022 Zhu, 2020, Life cycle environmental and economic assessment of alumina recovery from secondary aluminum dross in China, J. Clean. Prod., 277, 10.1016/j.jclepro.2020.123291 Fukumoto, 2000, Hydrolysis behavior of aluminum nitride in various solutions, J. Mater. Sci., 35, 2743, 10.1023/A:1004718329003 Gupta, 2004, Removal of chlorophenols from wastewater using red mud: an aluminum industry waste, Environ. Sci. Technol., 38, 4012, 10.1021/es049539d Nakajima, 2007, Material flow analysis of aluminum dross and environmental assessment for its recycling process, J. Jpn. Inst. Met., 48, 2219 Mahinroosta, 2018, Hazardous aluminum dross characterization and recycling strategies: a critical review, J. Environ. Manag., 223, 452, 10.1016/j.jenvman.2018.06.068 Hwang, 2006, Recovery of metals from aluminum dross and saltcake, J. Miner. Mater. Charact. Eng., 05, 47 David, 2013, Aluminum recovery as a product with high added value using aluminum hazardous waste, J. Hazard Mater., 261, 316, 10.1016/j.jhazmat.2013.07.042 Guo, 2019, The structural mode and main ideas of "No-Waste City" Construction, Environ. Monit. Manag. Technol., 31, 1 Zhao, 2019, The progress and management suggestions of the action on fighting environmental violation of solid waste, Fine Specialty Chem., 27, 3 Zhu, 2021, Comparison of three emerging dross recovery processes in China’s aluminum industry from the perspective of life cycle assessment, ACS Sustain. Chem. Eng., 9, 6776, 10.1021/acssuschemeng.1c00960 Nakajima, 2007, Material flow analysis of aluminum dross and environmental assessment for its recycling process, Mater. Trans., 48, 2219, 10.2320/matertrans.MRA2007070 Hong, 2010, Process of aluminum dross recycling and life cycle assessment for Al-Si alloys and brown fused alumina, Trans. Nonferrous Met. Soc. China, 20, 2155, 10.1016/S1003-6326(09)60435-0 Dewulf, 2008, Exergy: its potential and limitations in environmental science and technology, Environ. Sci. Technol., 42, 2221, 10.1021/es071719a Zisopoulos, 2017, The use of exergetic indicators in the food industry - a review, Crit. Rev. Food Sci. Nutr., 57, 197, 10.1080/10408398.2014.975335 Tsatsaronis, 1985, Tsatsaronis, Exergoeconomic analysis and evaluation of energy-conversion plantsâ”I. A new general methodology, Energy (Oxf.), 10, 69, 10.1016/0360-5442(85)90020-9 Meyer, 2009, Exergoenvironmental analysis for evaluation of the environmental impact of energy conversion systems, Energy, 34, 75, 10.1016/j.energy.2008.07.018 Ghofrani, 2020, Energy, exergy, exergoeconomics, and exergoenvironmental assessment of three brine recycle humidification-dehumidification desalination systems applicable for industrial wastewater treatment, Energy Convers. Manag., 205, 10.1016/j.enconman.2019.112349 Chen, 2004, Exergy analysis on texaco synthetic ammonia system, Trans. Beijing Inst. Technol., 24, 1016 Hashemi, 2019, Energy, exergy, exergoeconomic and sensitivity analyses of modified Claus process in a gas refinery sulfur recovery unit, J. Clean. Prod., 220, 1071, 10.1016/j.jclepro.2019.02.213 Oni, 2017, Thermoeconomic and environmental analyses of a dry process cement manufacturing in Nigeria, Energy, 135, 128, 10.1016/j.energy.2017.06.114 Liu, 2020, Performance evaluation of an ironmaking system with environmental costs, Complexity, 2020, 1 Khoshgoftar Manesh, 2021, Evaluation of power and freshwater production based on integrated gas turbine, S-CO2, and ORC cycles with RO desalination unit, Energy Convers. Manag., 228, 10.1016/j.enconman.2020.113607 Abdollahi Haghghi, 2019, Thermodynamic, exergoeconomic, and environmental evaluation of a new multi-generation system driven by a molten carbonate fuel cell for production of cooling, heating, electricity, and freshwater, Energy Convers. Manag., 199, 10.1016/j.enconman.2019.112040 Moradi, 2021, Process integration, energy and exergy analyses of a novel integrated system for cogeneration of liquid ammonia and power using liquefied natural gas regasification, CO2 capture unit and solar dish collectors, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2021.106374 Cioccolanti, 2019, Environmental and energy assessment of a small-scale solar organic rankine cycle trigeneration system based on compound parabolic collectors, Energy Convers. Manag., 198, 10.1016/j.enconman.2019.111829 Wang, 2019, Performance investigation of a solar-assisted hybrid combined cooling, heating and power system based on energy, exergy, exergo-economic and exergo-environmental analyses, Energy Convers. Manag., 196, 227, 10.1016/j.enconman.2019.05.108 Zhang, 2022, Energy, exergy, exergoeconomic and exergoenvironmental analysis on a novel parallel double-effect absorption power cycle driven by the geothermal resource, Energy Convers. Manag., 258, 10.1016/j.enconman.2022.115473 Cai, 2022, Advanced exergy and exergoeconomic analyses to evaluate the economy of LNG oxy-fuel combined cycle power plant, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2022.108387 Chouhan, 2019, Utilization of biogas from different substrates for SOFC feed via steam reforming: thermodynamic and exergy analyses, J. Environ. Chem. Eng., 7, 10.1016/j.jece.2019.103018 Li, 2019, Recovery of alumina from secondary aluminum dross by alkali leaching, Inorg. Chem. Ind., 51, 53 Amid, 2021, Exergetic, exergoeconomic, and exergoenvironmental aspects of an industrial-scale molasses-based ethanol production plant, Energy Convers. Manag., 227, 10.1016/j.enconman.2020.113637 M. Song, Study on the Process of Recovering Alumina from Secondary Aluminum Dross, in, Qingdao University of Science and Technology, China, 2018. Bi, 2006 Bi, 2007 Li, 2021, Analysis of the development scenarios and greenhouse gas (GHG) emissions in China’s aluminum industry till 2030, J. Clean. Prod., 290, 10.1016/j.jclepro.2021.125859 Cheng, 2020, Exploring the emission characteristics and reduction potential of air pollutants from chinese aluminum industry: 2005–2025, Earth'S. Future, 8, 1, 10.1029/2019EF001440 Guo, 2020, Scenario-based DEA assessment of energy-saving technological combinations in aluminum industry, J. Clean. Prod., 260, 10.1016/j.jclepro.2020.121010 Szargut, 1988 Song, 2012, A unified correlation for estimating specific chemical exergy of solid and liquid fuels, Energy, 40, 164, 10.1016/j.energy.2012.02.016 Peng, 2011, Exergy analysis of evaporation process in an alumina refinery, J. Cent. South Univ. (Sci. Technol. ), 42, 829 Ghorbani, 2020, Exergoeconomic and exergoenvironmental analyses of an integrated SOFC-GT-ORC hybrid system, Energy, 206, 11815, 10.1016/j.energy.2020.118151 Zheng, 2002, Fundamental of thermodynamic consistency of exergy functions, J. Chem. Ind. Engineering (China), 53, 673 Lazzaretto, 2006, SPECO: A systematic and general methodology for calculating efficiencies and costs in thermal systems, Energy, 31, 1257, 10.1016/j.energy.2005.03.011 Colpan, 2006, Thermodynamic and thermoeconomic comparison of combined cycle cogeneration systems, Int. J. Exergy, 3, 272, 10.1504/IJEX.2006.009797 Aghbashlo, 2019, Comprehensive exergoeconomic analysis of a municipal solid waste digestion plant equipped with a biogas genset, Waste Manag., 87, 485, 10.1016/j.wasman.2019.02.029 Tsatsaronis, 2007, Definitions and nomenclature in exergy analysis and exergoeconomics, Energy, 32, 249, 10.1016/j.energy.2006.07.002 Petrakopoulou, 2011, Exergoeconomic and exergoenvironmental analyses of a combined cycle power plant with chemical looping technology, Int. J. Greenh. Gas. Control, 5, 475, 10.1016/j.ijggc.2010.06.008 Marques, 2021, Life cycle assessment and comparative exergoenvironmental evaluation of a micro-trigeneration system, Energy, 216, 11815, 10.1016/j.energy.2020.119310 Petrakopoulou, 2012, Environmental evaluation of a power plant using conventional and advanced exergy-based methods, Energy, 45, 23, 10.1016/j.energy.2012.01.042 Morosuk, 2016, Environmental impact reduction using exergy-based methods, J. Clean. Prod., 118, 118, 10.1016/j.jclepro.2016.01.064 Ağbulut, 2022, Exergy, exergoeconomic, life cycle, and exergoenvironmental assessments for an engine fueled by diesel–ethanol blends with aluminum oxide and titanium dioxide additive nanoparticles, Fuel, 320, 10.1016/j.fuel.2022.123861 T. Eco-Indicator, Eco-indicator 99 Manual for Designers - A damage oriented method for life cycle impact assessment, (2000). Ghannadzadeh, 2018, Assessment of power generation from natural gas and biomass to enhance environmental sustainability of a polyol ether production process for rigid foam polyurethane synthesis, Renew. Energy, 115, 846, 10.1016/j.renene.2017.07.059 Ghasemi-Mobtaker, 2020, Application of photovoltaic system to modify energy use, environmental damages and cumulative exergy demand of two irrigation systems-a case study: Barley production of Iran, Renew. Energy, 160, 1316, 10.1016/j.renene.2020.07.047 Wang, 2008, Analysis on energy saving and emission reduction approaches of alumina industry in China, Environ. Prot., 4 Zuo, 2016, Liquid level optimal-setting for tube falling film evaporator based on exergy, CIESC J., 67, 891 Li, 2021, Analysis of energy saving and consumption reduction in alumina evaporation process, World Nonf. Metal, 198