Exceptional dynamic compressive properties of bio-inspired three-dimensional interlocking graphene network reinforced copper matrix composites

Lu, 2004, Ultrahigh strength and high electrical conductivity in copper, Science, 304, 422, 10.1126/science.1092905 Yan, 2021, Shear localization in metallic materials at high strain rates, Prog Mater Sci, 119, 10.1016/j.pmatsci.2020.100755 Cao, 2018, Structural evolutions of metallic materials processed by severe plastic deformation, Mat Sci Eng R-Rep, 133, 1, 10.1016/j.mser.2018.06.001 Song, 2021, Effects of strain rates on dynamic deformation behavior of Cu-20Ag alloy, J Mater Sci Technol, 79, 75, 10.1016/j.jmst.2020.11.043 Mishra, 2008, High-strain-rate response of ultra-fine-grained copper, Acta Mater, 56, 2770, 10.1016/j.actamat.2008.02.023 Wang, 2022, Mechanical response and damage evolution of bio-inspired B4C-reinforced 2024Al composites subjected to quasi-static and dynamic loadings, Mat Sci Eng A-Struct, 840, 10.1016/j.msea.2022.142991 Li, 2017, On adiabatic shear localization in nanostructured face-centered cubic alloys with different stacking fault energies, Acta Mater, 141, 163, 10.1016/j.actamat.2017.09.022 Chavan, 2021, Role of stacking fault energy (SFE) on the high strain rate deformation of cold sprayed Cu and Cu-Al alloy coatings, Mat Sci Eng A-Struct, 814, 10.1016/j.msea.2021.141242 Hamdi, 2010, Influence of stacking fault energy and short-range ordering on dynamic recovery and work hardening behavior of copper alloys, Scr Mater, 62, 693, 10.1016/j.scriptamat.2010.01.031 Novoselov, 2004, Electric field effect in atomically thin carbon films, Science, 306, 666, 10.1126/science.1102896 Novoselov KS, Fal′ ko VI, Colombo L, Gellert PR, Schwab MG, Kim K. A roadmap for graphene. Nature 2012;490(7419):192-200. Lee, 2008, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321, 385, 10.1126/science.1157996 Geim, 2007, The rise of graphene, Nat Mater, 6, 183, 10.1038/nmat1849 Zhang, 2021, Bioinspired multiscale Al2O3-rGO/Al laminated composites with superior mechanical properties, Compos B Eng, 217, 10.1016/j.compositesb.2021.108916 Pu, 2022, Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids, Compos B Eng, 234, 10.1016/j.compositesb.2022.109731 Lahiri, 2012, Unfolding the damping behavior of multilayer graphene membrane in the low-frequency regime, ACS Nano, 6, 3992, 10.1021/nn3014257 Liu, 2014, Strengthening metal nanolaminates under shock compression through dual effect of strong and weak graphene interface, Appl Phys Lett, 104, 10.1063/1.4882085 Long, 2016, Shock response of Cu/graphene nanolayered composites, Carbon, 103, 457, 10.1016/j.carbon.2016.03.039 Peng, 2023, Dynamic deformation mechanism in submicro-laminated copper with interlamellar graphene multilayers, Acta Mater, 252, 10.1016/j.actamat.2023.118941 Peng, 2023, Enhanced energy dissipation of graphene/Cu nanolaminates under extreme strain rate ballistic perforation, Compos A Appl S, 172, 10.1016/j.compositesa.2023.107611 Lin, 2023, Enhanced strength and toughness of Ni/graphene composite via three-dimensional graphene-like nanosheets network, Compos B Eng, 253 Shuai, 2016, Enhanced strength and excellent transport properties of a superaligned carbon nanotubes reinforced copper matrix laminar composite, Compos A Appl S, 88, 148, 10.1016/j.compositesa.2016.05.027 Cao, 2017, Aligning graphene in bulk copper: Nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity, Carbon, 117, 65, 10.1016/j.carbon.2017.02.089 Liu, 2022, Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy, J Alloy Compd, 920, 10.1016/j.jallcom.2022.165897 Liu, 2022, Breaking through the dynamic strength-ductility trade-off in TiB reinforced Ti composites by incorporation of graphene nanoplatelets, Compos B Eng, 230, 10.1016/j.compositesb.2021.109499 Wegst, 2015, Bioinspired structural materials, Nat Mater, 14, 23, 10.1038/nmat4089 Yang, 2013, Natural flexible dermal armor, Adv Mater, 25, 31, 10.1002/adma.201202713 Zhao, 2016, Cloning nacre's 3D interlocking skeleton in engineering composites to achieve exceptional mechanical properties, Adv Mater, 28, 5099, 10.1002/adma.201600839 Zhang, 2018, Effect of interface structure on the mechanical properties of graphene nanosheets reinforced copper matrix composites, ACS Appl Mater Inter, 10, 37586, 10.1021/acsami.8b09799 Ferrari, 2006, Raman spectrum of graphene and graphene layers, Phys Rev Lett, 97, 10.1103/PhysRevLett.97.187401 Schukraft, 2022, 3D modeling and experimental investigation on the damage behavior of an interpenetrating metal ceramic composite (IMCC) under compression, Mat Sci Eng A, 844, 10.1016/j.msea.2022.143147 Shi, 2020, Elastic strain induced abnormal grain growth in graphene nanosheets (GNSs) reinforced copper (Cu) matrix composites, Acta Mater, 200, 338, 10.1016/j.actamat.2020.09.017 Lin, 2018, Shock engineering the additive manufactured graphene-metal nanocomposite with high density nanotwins and dislocations for ultra-stable mechanical properties, Acta Mater, 150, 360, 10.1016/j.actamat.2018.03.013 Peng, 2022, Extreme strain rate deformation of nacre-inspired graphene/copper nanocomposites under laser-induced hypersonic micro-projectile impact, Compos B Eng, 235, 10.1016/j.compositesb.2022.109763 Wei, 2004, Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals, Mat Sci Eng A-Struct, 381, 71, 10.1016/j.msea.2004.03.064 Wei, 2007, Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses, J Mater Sci, 42, 1709, 10.1007/s10853-006-0700-9 Mao, 2018, Opposite grain size dependence of strain rate sensitivity of copper at low vs high strain rates, Mat Sci Eng A, 738, 430, 10.1016/j.msea.2018.09.018 Fu, 2019, Strain rate sensitivity and deformation mechanism of carbon nanotubes reinforced aluminum composites, Metal Mater Trans A, 50, 3544, 10.1007/s11661-019-05284-z Suo, 2013, Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperature and strain rate ranges, Mech Mater, 61, 1, 10.1016/j.mechmat.2013.02.003 Park, 2018, Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy, Mat Sci Eng A, 719, 155, 10.1016/j.msea.2018.02.031 Casem, 2020, Strain-rate sensitivity of nanocrystalline Cu-10Ta to 700,000/s, J Dynam Behav Mat, 6, 24, 10.1007/s40870-019-00223-w Srinivasan, 2021, Role of tantalum concentration, processing temperature, and strain-rate on the mechanical behavior of copper-tantalum alloys, Acta Mater, 208, 10.1016/j.actamat.2021.116706 Meyers, 1994 Gillis, 1969, Stress dependences of dislocation velocities, Phil Mag, 20, 279, 10.1080/14786436908228700 Wu, 2021, Damage and self-healing characteristics of monolayer graphene enhanced Cu under ballistic impact, Mech Mater, 155, 10.1016/j.mechmat.2020.103736 Arsenlis, 1999, Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density, Acta Mater, 47, 1597, 10.1016/S1359-6454(99)00020-8 Dorset, 1998, X-ray diffraction: a practical approach, Microsc Microanal, 4, 513, 10.1017/S143192769800049X Nan N, Li JM, X Zhang, DD Zhao, Zhu FL, He CN, et al. Achieving excellent thermal stability in continuous three-dimensional graphene network reinforced copper matrix composites. Carbon;212:118153. Bao, 1996, High strain rate deformation in particle reinforced metal matrix composites, Acta Mater, 44, 1011, 10.1016/1359-6454(95)00236-7 Hong, 2013, Microstructure and properties of SiC particles reinforced copper based alloy composite, Mod Phys Lett B, 27, 1341025, 10.1142/S021798491341025X Wang, 2021, Damage accumulation during high temperature fatigue of Ti/SiCf metal matrix composites under different stress amplitudes, Acta Mater, 213, 10.1016/j.actamat.2021.116976 Osovski, 2013, The respective influence of microstructural and thermal softening on adiabatic shear localization, Mech Mater, 56, 11, 10.1016/j.mechmat.2012.09.008 Chu, 2018, Largely enhanced thermal conductivity of graphene/copper composites with highly aligned graphene network, Carbon, 127, 102, 10.1016/j.carbon.2017.10.099 Guo, 2020, In situ synthesis of high content graphene nanoplatelets reinforced Cu matrix composites with enhanced thermal conductivity and tensile strength, Powder Technol, 362, 126, 10.1016/j.powtec.2019.11.121 Brillon, 2022, Anisotropic thermal conductivity and enhanced hardness of copper matrix composite reinforced with carbonized polydopamine, Compos Commun, 33, 10.1016/j.coco.2022.101210 Zhang, 2020, A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites, Nat Commun, 11, 2775, 10.1038/s41467-020-16490-4 Zhang, 2017, Achieving high strength and high ductility in metal matrix composites reinforced with a discontinuous three-dimensional graphene-like network, Nanoscale, 9, 11929, 10.1039/C6NR07335B