Evaluation of fracture energy, toughness, brittleness, and fracture process zone properties for lightweight concrete exposed to high temperatures

Karimaei, 2020, Mechanical performance of green concrete produced with untreated coal waste aggregates, Constr. Build. Mater., 233, 117264, 10.1016/j.conbuildmat.2019.117264 Karimaei, 2021, Estimating compressive strength of concrete containing untreated coal waste aggregates using ultrasonic pulse velocity, Materials (Basel), 14, 647, 10.3390/ma14030647 ACI Committee 213, Guide for structural Lightweight-Aggregate concrete (ACI 213R-03). American Concrete Institute, Detroit, 1999. Dabbaghi, 2021, Optimization of concrete mixtures containing lightweight expanded clay aggregates based on mechanical, economical, fire-resistance, and environmental considerations, ASCE J. Mater. Civ. Eng. Dabbaghi, 2021, Residual compressive stress–strain relationship of lightweight aggregate concrete after exposure to elevated temperatures, Constr. Build. Mater., 298, 123890, 10.1016/j.conbuildmat.2021.123890 Youm, 2016, Experimental study on strength and durability of lightweight aggregate concrete containing silica fume, Constr. Build. Mater., 114, 517, 10.1016/j.conbuildmat.2016.03.165 Dabbaghi, 2021, Experimental and informational modeling study on flexural strength of eco-friendly concrete incorporating coal waste, Sustainability, 13, 7506, 10.3390/su13137506 Dabbaghi, 2021, Residual mechanical properties of concrete containing lightweight expanded clay aggregate (LECA) after exposure to elevated temperatures, Struct. Concr. Nežerka, 2019, Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete, Cem. Concr. Compos., 103, 252, 10.1016/j.cemconcomp.2019.05.012 Dabbaghi, 2021, Life cycle assessment multi-objective optimization and deep belief network model for sustainable lightweight aggregate concrete, J. Cleaner Prod., 318, 128554, 10.1016/j.jclepro.2021.128554 Beygi, 2013, The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete, Mater. Des., 50, 267, 10.1016/j.matdes.2013.02.018 Khalilpour, 2019, A review on concrete fracture energy and effective parameters, Cem. Concr. Res., 120, 294, 10.1016/j.cemconres.2019.03.013 Fallahnejad, 2021, The influence of aging on the fracture characteristics of recycled aggregate concrete through three methods, Struct. Concr., 22, E74, 10.1002/suco.202000119 Karamloo, 2016, Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete, Eng. Fract. Mech., 168, 227, 10.1016/j.engfracmech.2016.09.011 Salehi, 2019, An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water, Arch. Civil Mech. Eng., 19, 803, 10.1016/j.acme.2018.10.008 Nikbin, 2020, Fracture parameters assessment of lightweight concrete containing waste polyethylene terephthalate by means of SEM and BEM methods, Theor. Appl. Fract. Mech., 107, 102518, 10.1016/j.tafmec.2020.102518 Abolhasani, 2020, The fracture behavior and microstructure of calcium aluminate cement concrete with various water-cement ratios, Theor. Appl. Fract. Mech., 109, 102690, 10.1016/j.tafmec.2020.102690 Hertz, 2005, Concrete strength for fire safety design, Mag. Concr. Res., 57, 445, 10.1680/macr.2005.57.8.445 Yu, 2012, Residual fracture toughness of concrete subject to elevated temperatures, vol. 488, 743 Roufael, 2021, Influence of lightweight aggregates on the physical and mechanical residual properties of concrete subjected to high temperatures, Constr. Build. Mater., 268, 121221, 10.1016/j.conbuildmat.2020.121221 Tanyildizi, 2008, Performance of lightweight concrete with silica fume after high temperature, Constr. Build. Mater., 22, 2124, 10.1016/j.conbuildmat.2007.07.017 Menou, 2006, Residual fracture energy of cement paste, mortar and concrete subject to high temperature, Theor. Appl. Fract. Mech., 45, 64, 10.1016/j.tafmec.2005.11.007 Chen, 2021, Fracture behaviors of concrete incorporating different levels of recycled coarse aggregate after exposure to elevated temperatures, J. Build. Eng., 35 RILEM FMC-50, 1985, Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams, Mater. Struct., 18, 287, 10.1007/BF02472918 Shah, 1995 Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cem. Concr. Res., 6, 773, 10.1016/0008-8846(76)90007-7 Planas, 1992, Measurement of the fracture energy using three-point bend tests: Part 2—Influence of bulk energy dissipation, Mater. Struct., 25, 305, 10.1007/BF02472671 Elices, 1997, On the measurement of concrete fracture energy using three-point bend tests, Mater. Struct., 30, 375, 10.1007/BF02480689 RILEM FMT-89, 1990, Size-effect method for determining fracture energy and process zone size of concrete, Mater. Struct., 23, 461, 10.1007/BF02472030 Bažant, 1990, Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete, Int. J. Fract., 44, 111, 10.1007/BF00047063 ACI Committee 211.1-91. Standard practice for selecting proportions for normal, heavyweight, and mass concrete, ACI manual of concrete practice, Part1, American Concrete Institute, Michigan (USA), 2000, p. 38. D.J. Akers, R.D. Gruber, B.W. Ramme, M.J. Boyle, J.G. Grygar, S.K. Rowe, T.W. Bremner, E.S. Kluckowski, S.R. Sheetz, R.G. Burg, Guide for Structural Lightweight-Aggregate Concrete, ACI 213R-03 American Concrete Institute (ACI), Michigan, 2003. ASTM C, 33. Standard Specification for Concrete Aggregates, Annual Book of ASTM Standard, ASTM, West Conshohocken, PA, 2018. ASTM C39, Standard test method for compressive strength of cylindrical concrete specimens, Annual Book of ASTM Standards, 2016. ASTM C 469, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, American Society of Testing Materials, 2014. ASTM C 496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Society of Testing Materials, 2017. ASTM C, 192. Standard practice for making and curing concrete test specimens in the laboratory, Annual Book of ASTM Standard, ASTM, West Conshohocken, PA, 2016. Nematzadeh, 2019, Residual compressive stress-strain relationship for hybrid recycled PET–crumb rubber aggregate concrete after exposure to elevated temperatures, J. Mater. Civ. Eng., 31, 04019136, 10.1061/(ASCE)MT.1943-5533.0002749 Nematzadeh, 2021, Prediction of ultrasonic pulse velocity in steel fiber-reinforced concrete containing nylon granule and natural zeolite after exposure to elevated temperatures, Constr. Build. Mater., 273, 121958, 10.1016/j.conbuildmat.2020.121958 Sadrmomtazi, 2020, Residual strength and microstructure of fiber reinforced self-compacting concrete exposed to high temperatures, Constr. Build. Mater., 230, 116969, 10.1016/j.conbuildmat.2019.116969 Petersson, 1980, Fracture energy of concrete: practical performance and experimental results, Cem. Concr. Res., 10, 91, 10.1016/0008-8846(80)90055-1 Matthews, 2019, Fib Model Code 2020 (MC2020), Struct. Concr., 20, 860, 10.1002/suco.201970021 Yu, 2016, Fracture properties of high-strength/high-performance concrete (HSC/HPC) exposed to high temperature, Mater. Struct., 49, 4517, 10.1617/s11527-016-0804-x Gesoglu, 2017, Mechanical and fracture characteristics of self-compacting concretes containing different percentage of plastic waste powder, Constr. Build. Mater., 140, 562, 10.1016/j.conbuildmat.2017.02.139 Mousavimehr, 2020, Post-heating flexural behavior and durability of hybrid PET–Rubber aggregate concrete, Constr. Build. Mater., 265, 120359, 10.1016/j.conbuildmat.2020.120359 Janotka, 2005, Effect of temperature on structural quality of the cement paste and high-strength concrete with silica fume, Nucl. Eng. Des., 235, 2019, 10.1016/j.nucengdes.2005.05.011 Georgali, 2005, Microstructure of fire-damaged concrete. A case study, Cem. Concr. Compos., 27, 255, 10.1016/j.cemconcomp.2004.02.022 Sadrmomtazi, 2019, On the fracture parameters of heavy-weight magnetite concrete with different water-cement ratios through three methods, Eng. Fract. Mech., 219, 106615, 10.1016/j.engfracmech.2019.106615 Nematzadeh, 2020, Compressive performance of steel fiber-reinforced rubberized concrete core detached from heated CFST, Constr. Build. Mater., 239, 117832, 10.1016/j.conbuildmat.2019.117832 Yu, 2012, Residual fracture properties of concrete subjected to elevated temperatures, Mater. Struct., 45, 1155, 10.1617/s11527-012-9823-4 Ramachandra Murthy, 2013, Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy, Constr. Build. Mater., 47, 1160, 10.1016/j.conbuildmat.2013.06.004 Cifuentes, 2013, Determination of size-independent specific fracture energy of normal-and high-strength self-compacting concrete from wedge splitting tests, Constr. Build. Mater., 48, 548, 10.1016/j.conbuildmat.2013.07.062